The percentage of buyers reporting that mills’ prices are negotiable contracted this week, following more than two consecutive months of rising negotiation rates. Four out of five steel executives polled this week reported that mills are willing to talk price to secure an order. According to our steel market surveys, a high willingness to negotiate […]
Steel mill lead times were relatively flat this week compared to our previous market check, with some products slightly up and others down. Hot rolled, cold rolled and plate lead times slightly declined compared to levels seen two weeks ago, while coated lead times increased. On average this week, lead times increased by 0.2 weeks […]
Steel mill lead times were mixed this week, with the processing time for some ordered products extending, shrinking for one, and another holding steady. Cold rolled and coated lead times increased compared to our previous market check, while plate lead times slightly declined and hot rolled lead times remained flat. On average this week, lead […]
Sheet prices were mixed this week as market participants continued to debate whether a recent round of price hikes had stuck. While some said the increases would provide a floor and prevent further price erosion, others said prices were more likely to resume their downward trend in the weeks ahead. There were also questions about […]
North Star BlueScope is “substantially complete” with a $700 million expansion that will provide the Delta, Ohio, EAF sheet mill with additional annual capacity of nearly 950,000 short tons (850,000 metric tonnes). The mill produced the first coil from its expansion in June and has begun the 18-month process of ramping up the facility to […]
SMU’s benchmark hot-rolled coil price inched upward for the first time since mid-April, nearly four months ago. The modest gain came even as cold-rolled and coated prices continued to see significant declines. Plate prices were roughly flat. By the numbers: Our average hot-rolled coil price now stands at $820 per ton ($41 per cwt), up […]
As has been the case for six weeks now, nearly nine out of ten steel executives polled this week reported that mills are willing to talk price to secure an order. According to our steel market surveys, a high willingness to negotiate has been evident in each of our checks since early May. SMU polls […]
Steel mill lead times were mixed this week, with some products slightly up and others down, according to SMU’s latest market check. Hot rolled and plate lead times rose compared to what we saw two weeks ago, while cold rolled and coated lead times inched further downward. Is this just a blip or the start […]
Sheet prices continued to move lower this week, and plate joined the downward trend following a price decrease announced last week by Nucor Corp. Hot-rolled coil prices now have a tenuous grasp on $800 per ton ($40 per cwt). SMU’s average HRC price stands at $805 per ton, down $35 per ton from last week […]
Prices for all seven of the steelmaking raw materials tracked in this SMU analysis declined over the last 30 days, receding further from record-high levels seen in March and April. Through the latest data available as of July 27, coking coal prices decreased 56% compared to one month prior, pig iron and busheling scrap prices […]
Prices for hot-rolled, cold-rolled and galvanized flat-rolled steel fell again this week with little signs of a near-term bottom. Hot-rolled prices fells into the low $800s per ton ($40s per cwt). Cold-rolled and galvanized base prices, meanwhile, fell into the $1,200s per ton ($60s per cwt) for the first time since mid-March. Spreads between highs […]
Once again, nearly nine out of ten steel executives reported that mills are willing to talk price to secure an order, according to buyers polled in this week’s steel market survey. Now standing at a five-month high, this high negotiation rate is similar to what we saw in early July. A high willingness to negotiate […]
Steel mill lead times through this week were relatively flat for sheet products and down slightly for plate, according to SMU’s latest market check. On average this week, lead times declined by 0.1 weeks across the board compared to early July and are down an average of 0.4 weeks compared to one month ago. Having […]
SMU’s average hot-rolled coil prices dropped below $900 per ton ($45 per cwt) for the first time since December 2020. And some sources, citing short lead times and spotty demand, said they see little reason for the trend to reverse in the short term. SMU’s hot-rolled coil prices now stand at $875 per ton ($43.75 […]
US Steel made downward revisions to their galvanized and Galvalume coating extras on Monday, with new extras going into effect Sept. 4, 2022. Earlier this month, Steel Dynamics, NLMK USA, and Wheeling-Nippon also revised their galvanized coating extras. SMU provides an updated comparison of mill galvanized coating extras in the Resources section of our website, […]
Startup company Altex Tube LLC is setting up shop on the campus of Steel Dynamics Inc.’s flatrolled sheet mill in Columbus, Miss. Altex’s new, $100 million HSS and mechanical tube mill will manufacture black and pre-galvanized steel tubing ranging in size from 1–6 inches square and 1.25–7.625 inches round, up to 48 feet in length […]
The United Steelworkers (USW) and United States Steel Corp. got underway with master contract bargaining talks this week, and they got straight down to business, according an update sent to union members. The USW struck a hopeful tone in early talks with Cliffs. The tone in an update on bargaining with USS was more business-like. The notice […]
Sheet prices continued to slide this week and plate prices to defy gravity. If there is an upside, it’s that the pace of sheet declines has moderated slightly. SMU’s hot-rolled coil price now stands at $910 per ton ($45.50 per cwt), down $45 per ton from $955 per ton a week ago and down $190 […]
Steel mill lead times continued to shorten into July for both sheet and plate products, according to our latest market check this week. On average this week, lead times declined by 0.3 weeks compared to late June and are down an average of half a week compared to one month prior. Having gradually declined from […]
Nearly nine out of ten steel executives polled this week reported that mills are willing to talk price to secure an order, according to our latest steel market survey. A high willingness to negotiate has been evident in our market checks since early May and now stands at the highest level since early February 2022. […]
The United Steelworkers (USW) is preparing to start master contract bargaining with US Steel in the first half of July, according to communications sent to union members. Local union chapters will send representatives to the master negotiations, which are being held in Pittsburgh and which will likely begin next week, a union spokesman told Steel […]
Steel Dynamics (SDI) has lowered metallic coating extras in response to declining zinc and aluminum prices. The new extras are effective Aug. 1, 2022. They apply not only to galvanized products but also to Galvalume, Galfan, and aluminized material, the Fort Wayne, Ind.-based steelmaker said. “Since the most recent adjustment to our published metallic coating […]
Domestic sheet prices continue to slide back to levels not seen since late 2020 or early 2021. Even plate prices, which had been stable to date, are starting to show signs of cracking. SMU’s average hot-rolled coil price now stands at $955 per ton ($47.75 per cwt), down $300 per ton (24%) from early June […]
Approximately 950 jobs could be lost at US Steel’s Granite City Works near St. Louis once the mill stops making steel, a company spokeswoman confirmed. The Pittsburgh-based steelmaker currently employs approximately 1,500 people at the mill. There would be an estimated 550 employees when the shift to pig iron production happens in 2024. “There is […]
Steel Market Update’s average hot-rolled coil price has fallen below $1,000 per ton ($50 per cwt) for the first time since December 2020 – or 18 months ago. The move comes as some market participants said that a floor might be near while others said such talk was mostly wishful thinking. Our benchmark hot-rolled coil […]
US Steel plans to stop making steel at its Granite City Works near St. Louis in the second half of 2024, a company spokeswoman told Steel Market Update on Tuesday. The Pittsburgh-based steelmaker expects that the mill’s blast furnaces will switch over to pig iron production as part of a deal with SunCoke Energy Inc., […]
Prices for six of the seven steelmaking raw materials tracked in this SMU analysis declined over the last 30 days, again receding from record-high levels seen 2-3 months prior. Through the latest data available as of June 23, coking coal prices decreased 28% compared to one month prior, aluminum prices fell 15%, iron ore and […]
Steel Market Update’s latest market check revealed that steel mill lead times continue to inch down for sheet and plate products as they move closer to historical norms. On average, lead times declined by 0.2 weeks compared to our early June figures and are down 0.4 weeks compared to one month ago. Lead times over […]
Approximately 84% of steel buyers report that mills are willing to talk price to secure an order, according to executives polled in our latest steel market survey. The rate of willingness to negotiate has remained over 50% in each of our market checks since early May and is now at the highest level since early […]
Sheet prices continued to fall this week on lower raw material costs, a buyers’ strike and concerns in some corners about a potential recession. But that gloomy sentiment was not universally shared, with some sources pointing to strong or at least steady demand despite the lower prices. SMU’s average hot-rolled coil price now stands at […]