By CRU Prices Analyst George Pearson The North American market has continued to see steel prices erode. We had previously anticipated that October scrap prices may be the lowest price seen over the next several years. We are now hearing that at least some market participants expect gains for November. The recent decline in scrap […]
SSAB Americas saw its third-quarter profits decrease to $54.5 million from $82.2 million in Q3 2018 due to lower plate steel prices. Sales were down 2 percent from the second quarter to $490 million and 6 percent from a year ago. Demand during the quarter was relatively stable with shipments of 521,000 metric tons, up […]
Over the past couple of weeks, Steel Market Update has been suggesting flat rolled steel prices were at a bottom and the domestic steel mills would soon announce price increases. Today, ArcelorMittal USA began advising customers of their intention to raise prices by $40 per ton. By the end of the workday, NLMK USA had […]
We saw modest movement in hot rolled this week as our survey respondents, both manufacturing and service centers, were consistent in reporting a decrease in the upper end of our range while holding the line at the bottom. As we reviewed the data, the vast majority of buyers were reporting numbers in the $460-$480 range […]
By John Packard, President & CEO, Steel Market Update On Monday, I spoke to the North American Steel Alliance (NASA) in Chicago. My comments centered on a wide variety of proprietary indices Steel Market Update produces–our flat rolled and plate indices, SMU Sentiment Index, SMU Service Center Inventories and Shipments data, Mill Lead Times and […]
Steel price volatility was persistent in 2019, said CRU Principal Analyst Josh Spoores at the FMA/ASD Executive Networking Series held in Pittsburgh last week. U.S. economic growth was below the historical trend throughout 2019, but has improved since April, according to the Chicago Fed National Activity Index. Activity in two key steel sectors, fabricated metal products and […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel prices (delivered to U.S. ports) and domestic hot rolled coil prices (FOB domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and other costs […]
Except for a brief uptick this summer, steel prices have been on the decline since March and breached the $500 per ton level in mid-October—a psychological line in the sand that leaves steel buyers wondering: Have prices hit bottom? Is it time to replenish inventories? Flat rolled steel prices took a steep dive last month, […]
Another hectic week for me as I travel to Chicago on Monday and Tuesday. I will be in the office on Wednesday, Thursday and part of the day on Friday before flying to London where I will be visiting CRU offices on Oct. 28, participating in the CRU Breakfast at the British Museum on the […]
By John Packard, President & CEO, Steel Market Update The Steel Market Update Steel Buyers Sentiment Index has been a mirror of the comments made by buyers of flat rolled and plate steel over the past few days. Our Sentiment Index, which measures how buyers and sellers of steel feel about their company’s ability to […]
Except for a brief uptick this summer, steel prices have been on the decline since March and breached the $500 per ton level this month—a psychological line in the sand that leaves steel buyers wondering how much further prices can slide. Steel Market Update estimates the average price for hot rolled is now down to […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel Near date HR futures month prices have been a bit choppy so far this month as the HR index has dropped […]
I have been in Pittsburgh these past two days attending the Metalcon show. I will return to my office on Friday afternoon. I spoke with a service center who is a large supplier to General Motors Tier One and Tier Two. GM built inventory going into the strike and continued to take shipments for one […]
Flat rolled prices took a steep dive lower this week as benchmark hot rolled dropped below $500 per ton for the first time since early November 2016. The spreads between hot rolled and cold rolled/coated products continue to be close to $200 per ton and even higher for Galvalume. We are collecting a small number […]
Steel Market Update’s analysis of flat rolled and plate inventories and shipments for the month of September: Flat Rolled = 49.9 Shipping Days of Supply Plate Steels = 52.1 Shipping Days of Supply (48.2 adjusted) Flat Rolled Service center inventories of flat-rolled steel dropped significantly in September, which the decrease in on-order volumes in August […]
I thought John Ferriola’s comments at the World Steel Association would be of interest to our readers. Joe Innace of Platts interviewed Nucor’s Ferriola and reported him saying, “The rest of this year will be pretty flat. Going into next year, it’s really a crapshoot.” He told Platts Nucor’s downstream businesses have seen prices drop, […]
Steel Market Update’s canvass of the market this past week reveals that many buyers are leaning pessimistic about their prospects for the fourth quarter. The majority responding to SMU’s questionnaire expect demand to continue weakening, prices to continue declining and growth to remain flat into the fourth quarter and possibly beyond. Demand SMU asked: At […]
Mill lead times for all flat rolled sheet products continued to see slight shortening over the past month. The average lead time for hot rolled is now down to nearly three and a half weeks, cold rolled is less than five and a half weeks and coated steels are less than six and a half […]
By CRU Principal Analyst Josh Spoores The North American sheet market has taken a turn for the worse. At a time when sheet demand and prices have already been stunted by a weaker trend of industrial growth and sheet demand, two recent events are only now starting to affect sheet prices: an on-going strike at […]
SMU contributor Gaurav Chhibbar is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Gaurav’s previous role, he was a trader at Cargill spending time in […]
John Packard is traveling… Here’s what readers of Steel Market Update have learned this week. Steel prices continue to slide. By Steel Market Update’s calculation, the benchmark price for hot rolled steel now averages $515 per ton. That’s the lowest in 2019. Given the widespread reports of disappointing demand, worsened by the strike at GM […]
Prices for all steel products saw further declines this week as price momentum continues to point firmly downward. The benchmark hot rolled price set a new low for the year, below the $520 per ton level reached in June. Here is how we see prices this week: Hot Rolled Coil: SMU price range is $480-$550 […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel prices (delivered to U.S. ports) and domestic hot rolled coil prices (FOB domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and other costs […]
More than 80 percent of the steel buyers polled by Steel Market Update in the last 10 days believe steel prices will test the lows reached earlier this year. SMU’s current average hot rolled price is $525 a ton, just $5 above the $520 low hit in late June. Pointing to sketchy demand, some believe […]
Questions about demand, tariffs, trade wars and the overall health of the economy continue to put downward pressure on steel prices. Here is how we see prices this week: Hot Rolled Coil: SMU price range is $500-$550 per ton ($25.00-$27.50/cwt) with an average of $525 per ton ($26.25/cwt) FOB mill, east of the Rockies. The […]
Mill lead times for most flat rolled steel products continue to see a slight shortening, according to the latest Steel Market Update data. Lead times for steel delivery are a measure of demand at the mill level. The shorter the lead time, the less busy the mills, and the more likely they are to discount […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel A $17/ST drop in Midwest HR spot prices as reflected in the decline of the CME August HR average and the […]
We saw further weakening in pricing this week, based on the active flat rolled and plate steel market trends questionnaire which began on Monday. We did see evidence of pressure on prices from a number of different areas. From the service centers, we saw reports of hot rolled at $500 per ton. However, we do […]
I received numerous notes regarding a hot strip mill outage at AMNS Calvert, which began last week. Based on reports from steel buyers, the HSM outage was expected to last for about one week. We asked ArcelorMittal for information and confirmation yesterday, but they failed to respond. Today, we received information that the Calvert lead […]
Domestic steelmakers managed to reverse the year’s long downtrend in steel prices for a few weeks in July and August, but the turnaround was short-lived. As of mid-September, Steel Market Update’s Price Momentum Indicator is pointing firmly lower for hot rolled, cold rolled and coated steel prices, as well as for steel plate, as the […]