As mentioned in a previous article in this newsletter, during our flat rolled steel market survey process we break out the different market segments into questionnaires that are dedicated to their industry. This allows us to compare market trends to see if they match. A good example is manufacturing demand. We asked manufacturing companies if […]
This afternoon, Steel Market Update reported the SMU Steel Buyers Sentiment Index +68 for early August 2014. This is the highest level ever recorded and the most optimistic we have seen buyers and sellers of flat rolled steel since the Sentiment Index began in November 2008. Positive numbers (above zero) indicate an optimistic attitude exists […]
Based on the latest flat rolled steel market survey conducted by Steel Market Update since the beginning of this week, steel buyers and sellers reported the domestic mills as being less willing to negotiate hot rolled steel prices and continue to be less willing to negotiate cold rolled prices. When we reviewed the data on […]
Steel buyers in the July ISM Steel Buyers Survey are expecting increased orders for the next three months. The percentage of buyers who expect an improvement in orders increased from 33.3 percent to 50 percent in July with the remaining 50 percent expecting order levels to remain the same. Forty percent of buyers still say […]
The Steel Market Development Institute (SMDI), a business unit of the American Iron and Steel Institute (AISI) announced that Dr. Jody N. Hall will succeed Ronald P. Krupitzer as Vice President Automotive Market following Mr. Krupitzer’s retirement at the end of the year. Dr. Hall is a former Technical Integration Engineer at General Motors Company […]
Each month the Commerce Department issues its Construction Put in Place (CPIP) data on the first working day covering activity two months earlier. June data was released on August 1st. Construction put in place is based on spending work as it occurs, estimated for a given month from a sample of projects. In effect the […]
The Bureau of Labor Statistics (BLS) report on non-farm employment indicated that 209,000 jobs were added in July, June was revised up by 10,000 to 298,000 and May up by 5,000 to 229,000. The three month moving average, (3MMA) declined to 245,000 in July after four consecutive months of growth beginning in February at 150,000, […]
US automotive sales were hot in July with double digit increases for many automakers. WardsAuto estimates 1.43 million vehicles were delivered in July, a 9.1 percent over July 2013. The seasonally adjusted annual rate of 16.4 million came in lower than the consensus range forecast of 16.6 million to 17.2 million. Summer sales incentive helped […]
The July ISM Report on Business indicates that activity in the manufacturing sector increased last month. The July PMI rose 1.8 percent to 57.1 for the highest reading since April 2011 and the 14th consecutive monthly increase. A PMI reading in excess of 43.2 percent, over a period of time, also indicates an expansion of […]
The JP Morgan Global Manufacturing PMI registered 52.5 in July, down just 0.1 point from June and indicating moderating growth. Indices for new orders and output were nearly unchanged from the prior month. The exports index increased at a faster rate, up 0.4 points to 51.5 in July. The employment index decreased by 0.4 points […]
At the end of each month Steel Market Update takes a look back at the data we have compiled and does a quick analysis for our readers. This is different than our SMU Key Market Indicators which is also included in this newsletter. Benchmark hot rolled coil prices averaged $667 per ton (SMU) for the […]
US Steel did surprisingly well in the second quarter, coming back from a weather impacted first quarter to narrow losses and show operating profit. US Steel reported a net loss of $18 million in the second quarter, performing better than expected. Income from operations came to $132 million. Net sales were $4.40 billion as compared […]
The SMU Key Market Indicators is a Premium Level product produced by Peter Wright in collaboration with Steel Market Update. Our Executive Level members have been getting access to all of the Premium Level data for the month of July (today is the last day). This includes access to all of the Premium data which […]
Today is the last day of July. During the past 30 days or so we have been giving our Executive Level subscribers (our normal newsletter members) access to Premium Level content and supplemental newsletters/articles. There are two Premium articles in tonight’s newsletter and you can recognize them as we have put a premium logo in […]
The past couple of days have been ones full of mixed messages. As we report in our article about HARDI wholesalers (see below) their buyers reported galvanized prices as having increased by $20 per ton since the middle of July. We are hearing from a multitude of sources that flat rolled prices have firmed on […]
Big River Steel CEO John Correnti says government should “stay out” of private industry. What appeared to be a contradiction after receiving more than $125 million in incentives from the state of Arkansas, Correnti stated in an interview with Arkansas Business that states have to invest in big business in order to stay competitive, but […]
Balance appears to be the word of the week, well at least for this past week while we were canvassing the flat rolled steel industry during our mid-July survey. Steel Market Update invited slightly more than 600 people representing approximately 590 companies to participate in our survey. Of those responding 44 percent were manufacturing companies […]
Durable goods orders increased 0.7 percent after dropping 1.0 percent in May, according to data released by the US. Census Bureau. New orders, excluding transportation, increased 0.8 percent. Excluding defense, new orders increased 0.7 percent. Machinery led the advance in June with a 2.4 percent increase in new orders. “Durable goods orders climbed 0.7% in […]
Even though our Steel Market Update Steel Buyers Sentiment Index dropped 3 points to +62 this week, it is still well within the optimistic range and close to the record high which was set at the beginning of this month. This continued optimism is reflected when looking at Sentiment based on a 3-month moving average […]
Mill lead times are an important indicator as to the strength or weakness of the mill order books. There are a number of ways to look at mill lead times. One is to go off the lead time sheets produced by some (not all) of the domestic mills. Steel Market Update does follow the lead […]
Steel Market Update (SMU) began our mid-July flat rolled steel market analysis (survey) on Monday of this week, shortly after Severstal announced the sale of their North American operations. We included questions about the sale both as a group and in industry segments of the survey. As a group, those responding were of the opinion […]
On Monday, July 21, 2014 OAO Severstal announced the sale of their two steel mills located in the United States for $2.325 billion. The two mills, Severstal Dearborn and Severstal Columbus were purchased by AK Steel and Steel Dynamics (SDI), respectively. The acquisition of the Severstal assets by two existing steel suppliers is being touted […]
Statistical data out of China is always questioned for a number of reasons, not least is, “Is the data politically motivated.” Other suspicions arise because China gets their data out faster than any other major economy and the data is never revised. Figure 1 shows published data for the growth of GDP, industrial production and […]
Metalforming companies are showing some uncertainty about the general economic outlook but more than half reported shipping levels were higher in July 2014 than in July 2013. The forecast for incoming orders in the next three months compared to the previous three is somewhat better–40 percent expecting orders to increase (up from 37 percent) and […]
Explanation of data sources: The broad index is published by the Federal Reserve on both a daily and monthly basis. It is a weighted average of the foreign exchange values of the U.S. dollar against the currencies of a large group of major U.S. trading partners. The index weights, which change over time, are derived […]
Both these data points are reported in the Federal Reserve G17 data base. The IP index was reported as 103.92 for June, with a three month moving average (3MMA) of 103.6. This was the ninth consecutive month for the index to exceed the pre-recession peak of September 2007. The 3MMA has expanded for 20 straight […]
Steel Market Update is a member of an association connected to the construction industry called HARDI. HARDI stands for Heating, Air-conditioning & Refrigeration Distributors International. HARDI and The Institute for Trend Research (ITR), an economic forecasting company, work together to gather economic data to provide a quarterly forecast to the HARDI members located in the […]
We have had a number of end users and service centers who are against the filing of any new steel trade cases contact us to express their opinions. Most do not want to be identified. We received the following letter to the editor from an executive at a service center who asked that we not […]
As you may have noticed, we have been writing a series of articles highlighting the benefits of our Premium membership. Through the end of July, our Executive members will have access to our Premium content. If you have not yet explored our Premium content, such as SMU’s survey data or imports by product/port/country, I would […]
Big River Steel will break ground on the new 1.6 million ton flat rolled mill some time later this month, according to their Chief Commercial Officer, Mark Bula. Construction of the new flat rolled electric arc furnace mini-mill was delayed for about a year as Big River Steel (BRS) had to wait until all air […]