Did everybody buckle up on your way to work on Monday morning? Boy, what a week it has been, and it’s only Tuesday! For those of you who are not aware of the events of the past few days, I will do a quick recap. Over the Thanksgiving Holiday, U.S. Steel had a large water […]
In what will be seen as supportive of higher domestic steel prices, ferrous scrap prices are expected to jump by $30 per ton or more in December on tight supplies and improving demand in the U.S., following on a similar increase in November. “Going into December and year end , the U.S. scrap market has […]
Ferrous scrap prices settled up $30-40/GT in December for most regions and most grades, on top of the $15-20/GT increase in November, lending further support to rising finished steel prices. Not only did prices find support from seasonally tighter scrap supply, but mill demand was stable or higher month over month for most regions, said […]
Stelco’s strategy to get into the merchant pig iron (MPI) market is getting high marks from the experts. As one of the Canadian steelmaker’s strategic growth initiatives, it plans to construct a new pig iron making facility at its Lake Erie Works to coincide with a blast furnace reline scheduled for Q2 2020. Stelco claims […]
Virgin steel is made with iron ore, coke and limestone. It was done that way, and only that way, for many decades. Then along came the “mini” mills. So-called minimills recycle ferrous scrap, mixing it with pig iron or other iron units and melting it down in large electric arc furnaces to produce new steel. […]
The domestic steel mills were busy on Friday with SSAB USA announcing a $40 per ton price increase on steel plate, and then U.S. Steel coming out with a $30 per ton price increase on flat rolled. The SSAB increase was the second on plate this month. Flat rolled has seen three price increase announcements […]
By CRU Research Manager Paul Butterworth, from CRU’s Global Steel Trade Service Although profitability for domestic sales in China has fallen sharply in 2019, steel exports from the country have not risen. Historically, when domestic profitability dropped, exports would rise. Prior analysis has shown that the strength of the domestic market is a key driver […]
Today I was on a conference call with steel buyers associated with HARDI, the trade organization whose members sell galvanized steel and other products to mechanical contractors. We have an article about the call in this evening’s issue, but there was one fact that was brought up by multiple executives: the price increases “have not […]
Canadian integrated steelmaker Stelco managed to improve on its revenues and operating income from the second to the third quarter, but still reported an $11 million loss in Q3 adjusted net income. The company plans to expand its product mix by adding pig iron production and shipments in 2020. Third-quarter revenue of CAD $475 million […]
By Senior Analyst Ryan McKinley, from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) rose by 7.5 percent m/m to 195.7 (see chart) after prices rose in most markets. The most pronounced rebounds were in the U.S. and European scrap markets, while prices in Asia either rose or were stable. Prices in regions […]
By CRU Principal Analyst Chris Asgill There has been a marked rise in Chinese imports of pig iron and HBI this year. This has been primarily due to limited domestic scrap supply that cannot be offset by external supply due to restrictions in scrap imports. Limited scrap supply relative to demand has meant that scrap prices in […]
By CRU Senior Analysts Ryan McKinley (USA), Ryan Smith (Australia) and Erik Hedborg (UK) Part three of our three-part series: What’s next for U.S. iron ore production? In parts one and two of our series, we examined the U.S. iron ore industry and reviewed recent market developments. We also explored the dependency of U.S. iron […]
Ferrous scrap prices are expected to rise by about $20/GT in November, lending support to the increase in flat rolled prices announced by the mills last week. “With mills seeking the price hike, they are unlikely to push scrap lower. It would make their negotiating position more difficult,” said Ryan McKinley, CRU North America analyst. […]
Weak steel prices and plummeting pellet premiums cut earnings significantly at Cleveland-Cliffs in the third quarter of 2019, but the company still beat analysts’ expectations. Revenues fell to $556 million compared to $742 million a year ago that included a one-time gain of $228 million due to a change in foreign currency translation. Third-quarter net income was […]
Compared to three months ago, all five of the raw materials prices considered in this report declined in October. Compared to September, there was a recovery in the prices of coking coal and zinc. Table 1 summarizes the price changes through Oct. 16 of the five materials considered in this analysis. It reports the month/month, […]
There was much discussion at the NASA conference and in the wake of the conference regarding scrap pricing and where prices are headed for the month of November. The discussion on scrap has been a moving target over the past week or two. We checked with some of our sources earlier this month and we […]
Lack of demand for ferrous scrap, especially in the Ohio Valley and Chicago market, forced prices down another $30-40/GT for October, on top of a similar decline in September, sources tell Steel Market Update. Scrap prices are their lowest in years, dropping eight out of the last 10 months. Shred prices today are around $215/GT, […]
By CRU Steel Prices Lead Anh Nghiem China returned to the market on Tuesday from their national holidays, but the market remained stable with mixed signals from the China Futures market, i.e. a 1 percent increase in the iron ore futures market while the steel futures market showed a 2 percent decline on the first […]
The net situation changed little from August but the Treasury 10/2 yield spread became slightly positive on Sept. 27 and the SMU Steel Buyers Sentiment Index suffered a serious setback on Sept. 15. This report is designed to be a big picture summary of data on which we have reported in detail during the month. […]
Raw materials prices were erratic in September with four of the five considered here experiencing price reversals since August. Table 1 summarizes the price changes through Sept. 25 of the five materials considered in this analysis. It reports the month / month, 3 months / 3 months and 12 months / 12 months changes on […]
Virgin steel is made with iron ore, coke and limestone. It was done that way, and only that way, for many decades. Then along came the “mini” mills. So-called minimills recycle ferrous scrap, mixing it with pig iron or other iron units and melting it down in large electric arc furnaces to produce new steel. […]
Virgin steel is made with iron ore, coke and limestone. It was done that way, and only that way, for many decades. Then along came the “mini” mills. So-called minimills recycle ferrous scrap, mixing it with pig iron or other iron units and melting it down in large electric arc furnaces to produce new steel. […]
By CRU Principal Analyst Chris Asgill The pervasiveness of steel market weakness came to the fore this month, particularly for steel long products, leading to a sharp drop in scrap prices in almost every market we assess. Consequently, the CRU metallics price indicator (CRUmpi) dropped by 8.3 percent m/m to 209.4 (see chart), the lowest level since November […]
By CRU Senior Analyst Ryan Smith Most people believe that minimills, which remelt scrap in electric arc furnaces, have a big cost advantage over integrated mills, which feed ore and coking coal into giant blast furnaces. But such conventional thinking is an oversimplification of the cost comparison. Based on site costs alone, and where steelmaking […]
Following on a small $20 increase in August, ferrous scrap prices for September are down $30 to $40 per ton as U.S. mills adjusted to lower demand and planned for upcoming fall shutdowns. “Prices fell this month amid a confluence of factors including ample supply, a weakening export market and mill outages,” reported CRU North […]
By CRU Senior Analyst Erik Hedborg Part two of our three-part series: What’s next for U.S. iron ore production? After a remarkably profitable 2018, the U.S. steel industry has suffered a setback in 2019 as steel prices have dropped sharply on weaker than expected demand. Steel margins have turned negative and production cuts have been […]
This report is designed to be a big picture summary of data we have reported in detail during the month. It summarizes 36 data streams that describe the state of the steel market and provide forward guidance for steel buyers and sellers. See the end of this piece for an explanation of the Key Indicators […]
Ferrous scrap prices are starting to settle as of today. Initial checks with some of our scrap sources found prime grades down $40 and obsolete grades down $30 in portions of the Midwest. We learned the Cleveland area mills bought busheling down $20 to $300/gross ton. We also learned of a purchase of HMS at […]
The price of iron ore corrected in August with a $32 per dry metric ton decline, while the four-month-long decline in the price of scrap reversed slightly. Table 1 summarizes the price changes through Aug. 21 of the five materials considered in this analysis. It reports the month / month, 3 months / 3 months […]
Steel Market Update sources report that ferrous scrap prices have turned around after repeated declines in the first half of the year and are settling up $20/GT for August, lending support to recent price increases on finished steel. “Demand is about the same for August as it was in July, there is just a little […]