The Metal Service Center Institute (MSCI) reported total steel inventories of 9,195,700 tons. This represents an increase of 15.2 percent above last year and when taking the current shipment rate into consideration, MSCI reported inventories as being 33.1 percent higher than November 2013. The daily shipment rate dropped from 170,100 tons per day (all products) […]
All of the flat rolled steel price indices followed by Steel Market Update moved lower this past week. Based on performance and their ability to keep up with the markets, the three key indices are SMU, CRU and Platts which reported benchmark hot rolled price averages as $615, $614 and $615 per ton, respectively. SteelBenchmarker […]
A quick note to advise our readers of our Holiday publishing and office schedule. We will continue to publish as normal through Tuesday, December 23rd. We will not publish our newsletter on Thursday, December 25th and Sunday, December 28th unless there is important breaking news that we feel must be shared with our readers. We […]
Total October steel imports were recently finalized by the US Department of Commerce at 4,441,271 net tons (4,029,058 metric tons), surpassing the previous high of 4,417,811 tons in August 1998. October had been on pace to be a high tonnage month, but previous preliminary data figures were a few thousand tons shy of breaking the […]
October steel exports totaled 1,010,089 net tons (916,338 metric tons), down 2.3 percent over September and down 10.9 percent from October 2013 (all products). Cut plate exports declined 16.1 percent from September to October to 108,527 tons, but were up 0.6 percent compared to levels one year prior. Exports of coiled plate were 39,950 tons in […]
Hot rolled prices dropped on all the indexes which reported new pricing this past week. Steel Market Update was down $10 per ton to $620 per ton with CRU ($623) and Platts ($625) coming very close to the SMU number. SteelBenchmarker did not report new pricing this past week as they only report HRC prices […]
Reliance Steel & Aluminum Co. announced on Tuesday the purchased of Fox Metals and Alloys, Inc. for an undisclosed sum. Fox Metals, based in Houston, Texas, is a steel distributor specializing in alloy, carbon and stainless steel bar and plate products, primarily servicing OEMs and machine shops supporting the oil, gas and petrochemical industries. “The […]
With the exception of Platts, all of the other flat rolled steel indexes reported benchmark hot rolled pricing as being down $5-$9 per ton this past week. Our average also declined by $5 per ton and now sits at $637 per ton. With at least one mill offering spot hot rolled at, or below, $600 […]
With crude oil prices breaking through $80 per barrel, all eyes are on the Baker Hughes rig count data. The question is will the lower oil prices affect the number of wells being drilled? Most assume there will be an impact, however, it could have a lag effect and take time before there is a […]
Flat rolled steel prices, as reported by Steel Market Update, Platts, CRU this past week (SteelBenchmarker did not report last week) had mixed results. CRU and SMU have hot rolled prices at $634 and $635 respectively. Platts remains stuck at $640 as they have been for a number of weeks now. SteelBenchmarker did not report […]
With crude oil prices breaking through $80 per barrel, all eyes are on the Baker Hughes rig count data. The question is will the lower oil prices affect the number of wells being drilled? Most assume there will be an impact, however, it could have a lag effect and take time before there is a […]
Total service center carbon steel shipments in October increased by 244,000 tons to 3.742 million tons. This was due to an increase in shipping days from 21 to 23. On a tons per day basis (t/d) shipments decreased from 166,600 tons in September to 162,700 in October. In every month this year since March, t/d […]
Yesterday the Metal Service Center Institute (MSCI) released their inventory and shipment data. According to the latest data total steel inventories dropped by 0.40 percent from the previous month and stood at 9,312,500 tons as of the end of October. Although down from the prior month steel inventories were 15.5 percent higher than October 2013. […]
Late last week Steel Market Update (SMU) adjusted our galvanized range to take into consideration the growing number of base prices reaching down to the $35.00/cwt level. Our galvanized range is now $35.00/cwt-$38.00/cwt for new spot orders. Over the weekend we adjusted our hot rolled range to reflect the lower numbers we have been collecting […]
With crude oil prices breaking through $80 per barrel, all eyes are on the Baker Hughes rig count data. The question is will the lower oil prices affect the number of wells being drilled? Most assume there will be an impact however, it could have a lag effect and take time before there is a […]
Evraz Claymont Steel is slated for demolition by Commercial Development Company, Inc. (CDC). The Delaware mill, which has been idled since December 2013, will be sold by Evraz to CDC for an undisclosed figure by the end of the year. CDC plans to “take the site through a brownfield-cleanup process, which will include the demolition […]
Licensed data for October was updated on November 4th through the Steel Import Monitoring System of the US Department of Commerce. The SMU publishes several import reports ranging from this very early look using licensed data to the very detailed analysis of final volumes by district of entry and source nation which is published in […]
We thought our readers might be interested in reading what the AISI reported regarding foreign steel imports for the month of October. Washington, D.C. – Based on the Commerce Department’s most recent Steel Import Monitoring and Analysis (SIMA) data, the American Iron and Steel Institute (AISI) reported today that steel import permit applications for the […]
The World Steel Association published its 2014 statistical year book this week with data through 2013. Figure 1 shows total crude steel production in the U.S. since 1880 in short tons. The peak production was 150,483,000 tons in 1973. The final total for 2013 was 95,566,000 tons, down by 2.05 percent from 97,565,000 in 2012. […]
China has a number of taxes on steel, both domestically and for exports. This is one of the misunderstandings many countries have (including the United States). We have been speaking about the subject with one of our key Asian trading contacts over the past few days as we asked about possible suspension of Boron added […]
Prices dropped on all of the indexes and all of the products followed by Steel Market Update. The average for hot rolled, based on the four indexes, was $641 per ton. Steel Market Update saw the market as being down to an average of $630 per ton just prior to the AK Steel announcement. The […]
Esmark Inc has confirmed its interest in acquiring all the assets of Serbian government-owned steel facility Zelezara Smederevo, a producer of steel, hot-rolled and cold-rolled products, and tin plate-coated products serving customers in Central Europe. Esmark Inc. has formed Esmark Europe to lead mill operations, finance, and commercial sales if the bid is successful. During a […]
A.M. Castle & Co. reported net sales of $245.5 million for third quarter for a net loss of $7.3 million. Metals segment sales totaled $210.7 million, down 1.6 percent from the previous quarter and 4.2 percent lower year over year. Pricing dropped 2.5 percent and sales volumes declined 1.4 percent compared to Q3 2013. “While […]
SSAB Americas sales jumped 29 percent year over year to SEK 3,716 million ($507 million) for an operating profit of SEK 558 million ($76 million). Profit was attributed primarily to higher steel prices and improved productivity. Steel shipments increased 5 percent to 559,000 tonnes (616,191 tons) on a year over year basis and 7 percent […]
Flat rolled steel prices continued to erode this past week based on SMU analysis of the CRU, Platts and SteelBenchmarker steel indices for the week ending October 24, 2014. Hot rolled prices now average $645 per ton, down $3 per ton from the prior week. If you remove SteelBenchmarker from the average, since they did […]
On Thursday of this past week Nucor announced their earnings and conducted their quarterly earnings conference call with analysts. SMU has highlighted a number of subjects touched on during the conference call. The following information (minus the headers) was taken directly from The Street transcript of the call: Potential for Light Flat Rolled Trade Cases […]
Total September steel imports were just shy 3.9 million net tons according to the Preliminary Census numbers just released by the U.S. Department of Commerce. Total steel imports were up 5.2 percent over August data, and up 38.0 percent year over year. Semi-finished imports (mostly slabs) were up 6.3 percent month over month and 47.3 […]
Steel buyers and sellers continue to be optimistic about their company’s ability to be successful in the current market conditions. However, there are some signs of strain growing, either due to seasonal pressures or margin squeezes, that may be giving pause to some within the industry. Even so, the results from the mid-October flat rolled […]
Nucor beat guidance forecasts with earnings of $245 million for the third quarter of 2014, up from $147 million in both Q2 2013 and Q3 2013. Consolidated net sales increased 8 percent to $5.70 billion. Strong third quarter earnings were attributed to improved performance in sheet steel, structural, bar, and plate steel that was partially […]
On Friday, October 16, 2014, the U.S. Department of Commerce terminated the Russian Hot Rolled Suspension Agreement. The agreement, which goes back to 1990 with numerous revisions over the years, covers all carbon flat rolled shipments out of Russia on the following ASTM numbers: A36 (plate), A568, A569, A572, A607 and A715. A few of […]