As of Friday, the National Interagency Fire Center was reporting that 80 large fires were still burning across the western United States. Varying reports indicate the flames have consumed anywhere from 4-7 million acres so far and at least 34 people have died. The death and destruction is heartbreaking, no doubt. Viewed in terms of […]
Lead times for spot orders of flat rolled and plate steels continue to extend and are around two weeks longer than in April at the depth of the pandemic as demand recovers and supplies tighten. Lead times for hot rolled now average five and a half weeks, cold rolled and galvanized over seven weeks, and […]
With steel prices on the rise and another round of increases in play, the mills appear to have the upper hand in negotiations. The mills are holding the line in price talks on hot rolled, cold rolled and coated steel orders, as well as plate, according to respondents to Steel Market Update’s market trends questionnaire […]
Importers of steel and aluminum who have been critical of the Commerce Department’s handling of Section 232 exclusion requests have found an ally in the Government Accountability Office. In a report released Tuesday, the GAO called for Commerce to improve and speed up the process it uses to review tariff exclusion requests. The report noted […]
“More than 18 years after it acceded to the WTO, China continues to fail to comply with its WTO obligations,” stated the America Iron and Steel Institute in comments to the U.S. Trade Representative regarding China’s compliance with World Trade Organization rules. In a 44-page letter to the USTR, AISI claims there is overwhelming evidence […]
Flat Rolled = 48.6 Shipping Days of Supply Plate = 56.9 Shipping Days of Supply Flat Rolled Service centers’ flat rolled steel supply reached its lowest point of the year in August, as shipments increased and intake remained nearly flat month on month. In August, service centers carried 48.6 shipping days of supply of flat […]
Nothing like a spike in steel prices to give the market a much needed attitude adjustment, one the mills and service centers can really use as the pandemic continues to weigh on day-to-day operations and individuals’ emotions. Steel prices have jumped by nearly $140 per ton in the last month. SMU’s Steel Buyers Sentiment Index, […]
The U.S. has reversed its position on imposing tariffs on Canadian aluminum imports. The U.S Trade Representative said in a statement on Sept. 15, “After consultations with the Canadian government, the United States has determined that trade in non-alloyed, unwrought aluminum is likely to normalize in the last four months of 2020, with imports declining sharply […]
Iowa farmers are complaining that tariffs are causing opportunists to raise steel prices for materials needed to rebuild following the devastating derecho storm that damaged farms last month. Senate Finance Committee Chairman Chuck Grassley (R-Iowa) and Sen. Joni Ernst (R-Iowa) penned a letter to Secretary of Commerce Wilbur Ross asking that Section 232 tariffs be […]
We can all agree steel prices are on an upward trajectory right now. How high they will go, and for how long, is another matter. SMU’s check of the market on Monday and Tuesday puts the benchmark price for hot rolled steel at $580 per ton, up about $40 in the past week. U.S. Steel, […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: New regulations published Sept. 11 in the Federal Register require steel importers to know and reveal the country where steel was “melted and poured” no matter how much the steel was processed thereafter. Steel importers have long been […]
Our thoughts and prayers go out to the millions of people on the West Coast who are suffering the threat and devastation of historic forest fires. The loss of life and property is staggering. And the blow to business and commerce in the region has yet to be measured. Face masks are doing double duty […]
Our futures contributor, Tim Stevenson of Metal Edge Partners, raises a good question in his column this week. With the mills moving steel prices higher, have buyers restocked enough to stay out of the market? “If so, service centers and end users can step away from spot buys and wait for prices to fall again. […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: I hope everyone had a restful and safe Labor Day weekend. Mine lasted a bit longer than it might. I’m back in the saddle, observing the international trade scene and also playing a small part in it. Things are, to put […]
What a difference a single month can make. Most respondents to SMU’s questionnaire this week see the mills collecting their last price increase and expect them to hike prices again sometime this month. As one executive commented: “There’s been a complete flip in the market from just 30 days ago. We went from discussions about […]
Industry sentiment, as measured by Steel Market Update, has improved to relatively healthy levels even higher than this time last year prior to the pandemic. Both the Current and Future Steel Buyers Sentiment Indexes have jumped by 20 points or more in the past month, suggesting buyers are feeling better about the market’s recovery. SMU […]
Lead times for spot orders of flat rolled and plate steels have extended by about a week over the past month as demand continues to recover and buying picks up ahead of rising prices. Lead times for hot rolled now average nearly five weeks and coated products more than seven weeks. Lead times are an […]
Flat rolled steel is no longer a buyer’s market as the mills appear less willing to negotiate while they try to collect the price increases they announced late last month. Steel Market Update’s market trends questionnaire this week shows the majority of buyers reporting mills holding the line in price talks on hot rolled, cold rolled […]
The benchmark hot rolled steel price has jumped back over the psychological line of $500 per ton, to $515 by SMU’s current estimate, which is a positive sign for steel demand, but it begs the question: How high will it go and for how long? SMU asked steel buyers how much of the $40-60 per […]
The Trump administration has announced a tightening of Brazil’s steel quota that will sharply reduce the tonnage of steel slabs imported into the U.S. for the rest of the year. “In light of recent deterioration in market conditions brought on by the COVID-19 pandemic affecting domestic steel producers, the United States has deemed it necessary […]
In response to U.S. complaints of recent surges, Mexico has agreed to strictly monitor exports of standard pipe, mechanical tubing and semifinished products through June 1, 2021. In exchange, the U.S. will maintain Mexico’s exemption from the Section 232 national security tariffs, said U.S. Trade Representative Robert Lighthizer in a statement on Monday. Section 232 […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: A number of readers have asked for particulars on the recent actions on steel trade between the United States, Brazil and Mexico. The numbers are available in some detail now. I will try to explain these for the […]
How much has the market recovered from the depths of the pandemic? If steel prices are an indicator, we’ve made some progress. But is the bump we’ve seen in the past several weeks just a temporary blip or a sign that the upturn in steel demand is real and sustainable? Service center and OEM executives […]
The COVID-19 pandemic has clearly taken a toll on the attitudes of many industry executives. The pessimism is evident in some of the responses to polling conducted during the SMU Virtual Steel Summit this week. We asked the hundreds of executives on the site: Where do you believe steel demand will be at this time next year compared […]
Claiming national security concerns over a slump in the U.S. steel market, President Trump issued a proclamation late Friday that appears to amend the quota limits on Brazil, further restricting steel imports from South American nation. While it’s unclear at this point which products will be affected and to what degree, one source tells SMU […]
Industry sentiment has improved in the past two weeks, as measured by Steel Market Update. SMU’s Steel Buyers Sentiment Indexes took a dip in July but rebounded in the latest check of the market for reasons that are not entirely clear. Respondents bemoan the persistent uncertainty, but business is good in certain sectors. SMU asks […]
Welcome from SMU Virtual Steel Summit Conference control central in Hobe Sound, Fla. It’s sunny, temperatures are in the mid-90’s and my home looks nothing like a typical Florida residence as a team of production and audio/visual experts assist in the creation this year’s virtual event. Putting on a conference as large as ours has […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: Time was we looked with great interest at the deliberations of the party platform committees to see who was the most influential—young vs. old, moderates vs. conservatives vs. progressives, etc. In this year of the pandemic, the entire […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: The nation and the world saw a greater than normal number of presidential announcements in the past week. I debated Philip Bell, the president of the Steel Manufacturers Association, on issues related to Section 232 at the SMU […]
Last week Steel Market Update adjusted all of the flat rolled price momentum indicators from Neutral to Higher. We made the decision to move hot rolled, cold rolled, galvanized and Galvalume to higher due to prices already beginning to track up from the low levels achieved over the past couple of weeks. We also made […]