The US Surface Transportation Board (STB) has approved the merger of the Canadian Pacific (CP) and Kansas City Southern (KCS) railways, subject to certain conditions. When completed, the two railways would combine to form Canadian Pacific Kansas City (CPKC), the first single-line railway that connects the US, Mexico, and Canada. “The decision authorizes CP to […]
What’s perhaps most shocking about Cleveland-Cliffs starting the week up $100 per ton ($5 per cwt) on sheet and targeting $1,200 per ton for hot-rolled coil (HRC) is that many of you didn’t find it shocking. In early February, we got used to prices going up by $50 per ton from one week to the […]
Klöckner & Co. expects steel prices to come down later this year after a sharp rise in Q1, the company said in its 4Q earnings report. “Despite the rise in steel prices at the beginning of 2023, Klöckner & Co. expects a lower price level overall compared to the prior-year period and correspondingly lower sales,” […]
The steel industry in the US, and across much of the developed world, finds itself between two greens. On the one hand is the constant innovation towards sustainable, decarbonized “green” steel. And, on the other, is a more traditional green, the bottom line: money. The hope is to keep the two aligned, increasing profits while […]
Steel Dynamics Inc. (SDI) has broken ground on its previously announced aluminum rolling mill outside of Columbus, Miss., according to local media reports. When local TV station WCBI asked SDI chairman, president, and CEO Mark Millett why the company chose the area, he said it was in large part because of opportunities in the beverage […]
SMU polled steel buyers on a variety of subjects on Monday and Tuesday of this week, including current and future steel prices, inventory strategies, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing some of them in each buyer’s own words. We want to hear your thoughts, too! […]
We’ve just seen the biggest week-over-week increase in hot-rolled coil prices since the frenzy following Russia’s invasion of Ukraine last year. SMU’s hot-rolled coil (HRC) price is up $140 per ton ($7 per cwt) week over week. That’s our biggest such gain since prices jumped $210 per ton in mid-March of last year at the height of […]
A sheet supply squeeze is on and, according to some market participants, chances are it’s only going to get tighter. There is no one thing, a war or pandemic, that’s causing the squeeze this time. Instead, it’s a litany of comparatively smaller events that combined have created some real havoc. You know that list by […]
Mexico continues to have its problems with US relations. On March 3, former Attorney General William Barr penned a column in the Wall Street Journal about failures by Mexico to stem the drug cartels. Illegal drugs are flowing into the US over the apparently porous border. Barr recommends that the US take action reminiscent of […]
Despite the economic concerns that lowered consumer sentiment towards the end of 2022, aluminum products demand has held up throughout the first three months of the year. A slowdown from the frenetic post-pandemic pace is apparent. Overall, though, both rollers and extruders comment that conditions are better than expected. The new order index as released […]
Mexico has historically relied on steel sheet product imports to meet its demand as domestic suppliers, such as Ternium and AHMSA, had insufficient production capacity. But, in recent years, both Ternium and ArcelorMittal have built new capacities for hot-rolled (HR) coil in Mexico. Ternium is also in the process of building more downstream capacity and […]
SMU’s Steel Demand Index indicates that the pace of growth has slowed down when it comes to apparent demand for flat-rolled steel in the US. The index is still above 50, which indicates improving demand. But it is down 6.4 points, following a similar weakening seen in the prior reading in mid-February. The back-to-back declines […]
A majority of shares in Mexican steelmaker Altos Hornos de México (AHMSA) has been sold to a group of foreign investors, according to reports in the Mexican press. Shareholders of Grupo Acerero del Norte signed an agreement to transfer the majority of AHMSA shares to the group of foreign investors, an article in Milenio said on […]
February came in with a bang and went out with one too. We saw two rounds of $50-per-ton sheet price increases early in the month. Then one of $100 per ton. And finally Cleveland-Cliffs came in near the buzzer on Monday with another $100-per-ton price hike. We think that was the last shot of the […]
Sometimes it’s hard to know who your friends are. What starts offs as a simple disagreement escalates. Things can soon spin out of control. And that’s just for people. When dealing with nation states like the US and Mexico, things get a bit more complex, and the stakes a whole lot higher. At the beginning […]
On the morning of Feb. 24, the White House issued a proclamation to adjust aluminum imports and taking further action under Section 232 of the Trade Expansion Act of 1962. Following the guidance of the Secretary of Commerce, the president issued an order adding a 200% duty to Russian metal coming into the US. Imported […]
North American auto assemblies rose 16.1% in January, recovering for the first time in three months. Last month’s assembly output was among one of the highest in nearly two years and 13.8% higher year on year (YoY), according to LMC Automotive data. On the supply side, inventory levels are expected to gradually improve this year as […]
US light-vehicle (LV) sales slowed to an unadjusted sales figure of 1.03 million units in January, the US Bureau of Economic Analysis (BEA) reported. Despite the month-on-month (MoM) decline, January’s total was still 4.2% higher year-on-year (YoY), and the sixth consecutive month to see YoY increases in sales. LV sales were up 17.73% MoM in December on […]
Sheet prices are up again. By a lot. For the third time this month. And it’s not over yet! Nucor alone is up more since Thanksgiving ($310/per ton) than they were after the invasion of Ukraine ($275/ton), according to our price increase calendar. We had obvious drivers for the last two big rallies. The snapback […]
Thirteen US senators from both major political parties wrote to top trade officials last week requesting that Section 232 tariffs be reinstated on some Mexican steel products, notably steel conduit. “In recent months, it has become clear that Mexican steel imports ‘now exceed historic volumes of trade’ and are ‘surg[ing] meaningfully” into our market,” the […]
Helping out with chores as a kid is something many of us do. But how often do your chores lead to a life-long career? Eric Daniel, general manager of Metalwest locations in Colorado, New Mexico, and Arizona, took doing chores to new heights. Steel Market Update interviewed Eric and learned how he’s made his career […]
There is still a debate on whether the US will enter into a recession during 2023. The beginning of the year has been slower, but overall end-use demand has been holding up relatively well. The mid-part of the year, Q2-Q3, is where most forecasts peg a downturn. Therefore, perhaps the largest challenges are still looming. […]
Ternium plans to spend $2.2 billion to build an electric-arc furnace (EAF) and direct-reduced iron (DRI) module in North America. The Latin American steelmaker said the EAF would have capacity of 2.86 million short tons (2.6 million metric tons) per year and that the DRI unit would have capacity of 2.31 million short tons (2.1 […]
Ternium recorded narrower profits in the fourth quarter on lower steel prices and higher costs. The Luxembourg-based steelmaker, which operates primarily in Latin America, said it expected results to improve in 2023, echoing the comments of its competitors in their recent earnings releases. Ternium’s earnings financial results are in the table to the left. The […]
The “new normal,” we have heard that a whole lot since the pandemic took hold. Are we really seeing a paradigm shift? Or is it just a trendy phrase? But, first, let’s talk about price hikes. If three’s a crowd, then what’s five – a herd? The week got off to a quick start early […]
ArcelorMittal expects that its $2.2-billion acquisition of Brazilian steelmaker Companhia Siderúrgica do Pecém (CSP) will close in late February. “The transaction closes end of this month,” chief financial officer Genuino Christino said during an earnings call with analysts last week. The Luxembourg-based steelmaker had said that the deal had received final antitrust clearance in commentary […]
The Covid-19-related shutdowns and subsequent supply chain disruptions emphasized the importance of onshoring. Geopolitical uncertainty, the war in Ukraine, and recent sovereign security issues, have added to global supply chain concerns. In the US, new legislation, the IRA, USMCA, and Build Back Better have focused on securing and bolstering North American manufacturing conditions. The task […]
Ternium Mexico president César A. Jiménez sees the company’s investment in Pesquería, outside of Monterrey, as an opportunity to replace imports with steel produced in Mexico. Jiménez sat down with SMU managing editor Michael Cowden at SMU’s Tampa Steel Conference for a Fireside Chat. Beyond Pesquería, he gave his thoughts on a range of topics, […]
I am writing these Final Thoughts from an exhibition hall at Tampa Marriot Water Street hotel, where we just wrapped up the Tampa Steel Conference. The table I’m writing from is about to be taken down and packed up, and I have to get to the airport soon – so forgive me for what tonight […]
SMU polled steel buyers on a variety of subjects on Monday and Tuesday of this week, including current and future steel prices, inventory strategies, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing some of them in each buyer’s own words. We want to hear your thoughts, too! […]