Producing, processing and transporting steel are all hazardous undertakings—arguably made even more hazardous by the widespread legalization of marijuana. Trade associations and steel companies seem reluctant to comment on this subject. Some may see it as a minor issue as marijuana use is already so commonplace and relatively benign compared to other drugs. For others, […]
Most indicators of manufacturing activity are still positive, but if trends continue growth could become negative by late summer, according to Steel Market Update’s latest analysis. This report summarizes 11 data streams that describe the state of U.S. manufacturing in general and the steel industry in particular. We have reported on most of these separately […]
The Empire State Manufacturing Index plunged 26 points in June to register -8.6 for its first negative reading in two years. Manufacturing growth in New York did an about face from May’s six-month high with the new orders index plummeting 22 points and shipments 7 points. The employment index fell to -3.5, while the average […]
Steel Market Update Briefs: ArcelorMittal, JSW Steel, Reibus in the news: JSW Steel Output Up 4.0 Percent in May JSW Steel announced that its steel output grew to 1.45 million metric tons in May 2019, a 4 percent increase year-over-year. Flat rolled products increased 6.0 percent to 1.02 million metric tons and long products increased […]
The following article discussing the global ferrous derivatives markets was written by David Feldstein. As an independent steel market analyst, advisor and trader, we believe he provides insightful commentary and trading ideas to our readers. Note that Steel Market Update does not take any positions on HRC or scrap trading, and any recommendations made by […]
Steel Market Update is pleased to share this Premium content with Executive-level members. For more information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Demand for long products is strong, driven by construction, while demand for sheet is declining, according to this SMU analysis of the latest data from the American Iron and […]
The CEO of ArcelorMittal says Europe has a “steel glut” because of U.S. tariffs and the EU needs to do more to limit imports. ArcelorMittal Chairman and CEO Lakshmi Mittal told a German newspaper yesterday that safeguards initiated by the EU are not successfully protecting the European steel industry. “The EU has announced safeguard measures, […]
Mexican steel producer, Altos Hornos de Mexico, S.A.B. de C.V. (AHMSA) has reached an agreement with South Korea’s Paco Engineering to build Mexico’s first coated galvanized steel sheet plant. The new $20 million plant in Monclova will be able to process 90,000 tons of cold rolled sheet per year. “The painted sheet plant is one […]
XOM Marketplace—the latest online solution for buying and selling materials such as steel, stainless steel, aluminum and plastics—has gone live in the United States. Active in Europe since 2018, XOM Materials, the Berlin-based company behind the new online marketplace, already claims success in Germany and other European markets. Expansion into the U.S. marks a major […]
The rate of job creation in the U.S. in 2019 is slowing, according to Steel Market Update’s analysis of the latest Bureau of Labor Statistics data. Net job creation in May was an unexpectedly low result of 75,000. To make matters worse, March was revised down by 36,000 and April was revised down by […]
The Bureau of Labor Statistics issued a dismal employment report for May with the U.S. economy seeing a net gain of just 75,000 nonfarm jobs. Last month, 90,000 jobs were created in the private sector while government lost 15,000 positions. To put these figures in perspective, they should be considered over a longer time frame, […]
Mexico will not have to face tariffs from the U.S. after coming to an agreement with the Trump administration on immigration. The 5 percent tariff on all goods imported from Mexico was scheduled to begin Monday, but the president called off the punitive measures in a tweet on Friday evening. Said Trump on Twitter: “I […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: On Friday evening, President Trump announced that he was suspending “indefinitely” the tariffs on goods imported from Mexico to the United States. The outlines of the deal that had this result have been announced, but there are no […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: On Friday evening, President Trump announced that he was suspending “indefinitely” the tariffs on goods imported from Mexico to the United States. The outlines of the deal that had this result have been announced, but there are no […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel prices (delivered to U.S. ports) and domestic hot rolled coil prices (FOB domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and other costs […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel HR spot prices continue to trickle lower. June indexes have started out under $600/ST with Jun’19 HR futures trading in the […]
By CRU Principal Economist Lisa Morrison April reports related to manufacturing indicate a potential softening in the sector going forward. Since total IP growth for Q1 was revised down to register a decline of 0.5 percent q/q, we have reduced our forecast for 2019 IP growth to 2.0 percent from 2.7 percent previously. The ISM […]
Global manufacturing activity sank into contraction in May. The JP Morgan Global Manufacturing PMI slipped to 49.8 last month for its lowest level since October 2012. International trade concerns dampened new export orders, which fell for the ninth month in a row. Business optimism fell to a level not seen since October 2012. Said JP Morgan […]
The Steel Market Development Institute (SMDI), a business unit of the American Iron and Steel Institute (AISI), presented awards for achievement and service to the North American steel industry at the institute’s General Meeting in Washington this week. Recipients were Dr. Grant Thomas of AK Steel, Eric Petersen, formerly of AK Steel, and Edward Pleet […]
Steel Market Update’s Steel Buyers Sentiment Index dipped below the +50 mark and continued to erode last month as the uncertainty over tariffs and trade had a negative effect on buyers’ attitudes. With OEM and service center executives feeling less positive about their prospects for the next few months, as indicated by SMU Future Buyers […]
By CRU Principal Economist Lisa Morrison During the last two years, we have become somewhat accustomed to waking up to some fresh, new policy idea of the Trump administration, disseminated via presidential tweet. However, the levying of tariffs on Mexican imports, as punishment for Mexico allowing Central American migrants to traverse their country in order […]
With prime steel prices continuing to slide, market conditions for distributors of secondary steel are a bit discouraging. The cheaper the prime products, the less incentive for buyers to seek out deals on nonprime material. Nonprime or secondary steel includes coils that are rejected because they failed to meet the specifications for their original use, […]
Manufacturing in May grew at its slowest pace in two and a half years amid trade tensions and slower demand, reports the Institute for Supply Management. The PMI for the Manufacturing ISM Report on Business decreased 0.7 percentage points from April to a reading of 52.1 percent. The index for new orders gained one percentage […]
The American Iron and Steel Institute’s (AISI) Board of Directors today welcomed two new directors — Michael McQuade, Algoma Steel Chief Executive Officer, and Ed Ramsey, Regional President-North America for Harsco Metals and Minerals. “Michael McQuade and Ed Ramsey are tremendous ambassadors for the steel industry, and I am excited to welcome them to the […]
The Conference Board’s measure of consumer confidence in May was the highest since last November. This is quite a volatile indicator; therefore, we prefer to smooth the data with a moving average to reduce monthly volatility. The composite value of consumer confidence in May was 134.1 with a three-month moving average (3MMA) of 129.2. The […]
China’s crude steel production in April exceeded an annualized rate of one billion tons for the first time as the Asian giant continues to grow its global market share, according to Steel Market Update’s analysis of the latest World Steel Association data. On March 27, the OECD Steel Committee reported: “Low growth prospects for the […]
Promises of steel tariff relief were short-lived for Mexico as President Trump’s latest tariff move adds new penalties and dashes hopes for quick ratification of the USMCA. Trump announced on Thursday that 5 percent tariffs will be imposed June 10 on all Mexican goods, including steel, until such time that Mexico stops the influx of […]
Trade attorney and Steel Market Update contributor Lewis Leibowitz offers the following update on events in Washington: President Trump announced his intention to impose new tariffs on imports from Mexico on Thursday afternoon. Beginning June 10, 5 percent tariffs will be imposed on all imports of goods from Mexico. On the first of July, the […]
Metalforming companies are expecting a downward trend in business conditions for the next three months, according to 119 metalforming companies surveyed by the Precision Metalforming Association. The PMA Business Conditions Report for May shows only 19 percent of those surveyed expected economic activity to improve. About 24 percent expected orders to decline, an increase from […]
The MNI Chicago Business Barometer gained 1.6 points in May to register 54.2. Survey responses showed softening in both manufacturing business activity and confidence. The three-month average for the Index slipped to a two-year low, said MNI Indicators. Production and new orders rose in May, but not enough to make up for weaker levels in […]