Category: Sheet

Sheet prices continued to move higher this week on the heels of mill price hikes and extending lead times.

The percentage of steel buyers saying mills were willing to negotiate spot pricing has fallen for all products SMU surveys, according to our most recent survey data.

Nucor aims to increase base prices on all new sheet orders, effective immediately. The Charlotte, N.C.-based steelmaker seeks at least $1,100 per ton ($55 per cwt) for hot-rolled coil (HRC), according to a Monday letter to customers.

Flat-rolled steel prices were in a holding pattern ahead of Thanksgiving.

Galvanized steel buyers reported a seller's market with steady demand, long lead times, and strong pricing on this month’s call of the Sheet Metal/Air Handling Council of the Heating, Air-Conditioning & Refrigeration Distributors International (HARDI) association.

The spread between hot-rolled coil (HRC) and galvanized sheet base prices has been hovering near $200 per net ton since late July, according to SMU’s latest analysis.

Surging US sheet prices and expanding lead times are making imports more attractive. The automotive workers’ strike is essentially over, and domestic US sheet prices have rocketed higher alongside lead times. There is little to suggest that the momentum of these price increases will slow over the next month or two, and thus imports have […]

Spot prices for steel sheet shot upward again this week on the heels of steep price increases announced by domestic mills last week. SMU’s hot-rolled coil price rose to $940 per ton ($47 per cwt) on average, up $75 per ton from last week and up nearly $300 per ton from a 2023 low of […]

The percentage of steel buyers saying mills were willing to negotiate spot pricing fell for hot rolled this week, while plate's negotiation rate shot up, according to SMU's most recent survey data.

Lead times for most sheet products were pushed out even further this week as domestic prices continue to rise. Plate lead times, meanwhile, contracted on falling prices and waning demand.

Nucor Corp. announced this morning that it is joining Cleveland-Cliffs, aiming to increase prices for hot-rolled steel (HRC) and heavy gauge hot-rolled products, effective immediately.

Spot prices for steel sheet continued to shoot upward this week, which brought yet another round of price hikes.

Cleveland-Cliffs Inc. said on Tuesday that it had raised minimum base prices for hot-rolled coil (HRC) to $1,000 per ton ($50 per cwt).

ArcelorMittal joins U.S. Steel and Cleveland-Cliffs, pushing sheet prices higher, according to an internal commercial memo on Oct. 31.  

Sheet prices surged this week on limited spot tonnage and on the heels of steep price increases announced by domestic mills.

Cleveland-Cliffs said Tuesday that it would increase spot market base prices for carbon hot-rolled, cold-rolled, and coated steel sheet.

CRU forecasts a stronger year for steel sheet demand in 2024 than in 2023 as growth continues in Asia and a recent period of contraction in the West ends.

U.S Steel posted sharply lower earnings as a result of a drop in steel prices and only modest gains in shipments. The Pittsburgh-based steelmaker said little about the sales process it launched in August.

Steel buyers said mills are less willing to budge on spot pricing for sheet products, but plate bucked this trend, according to SMU’s most recent survey data.

U.S. Steel on Thursday announced that it would increase spot prices for steel sheet by another $100 per ton.

Sheet prices rose for a fourth consecutive week following a second wave of price hikes announced by domestic mills.

ArcelorMittal and Stelco joined last week’s move by domestic mills to push sheet prices higher.

Nucor Steel held a groundbreaking ceremony on Friday for its Nucor Steel West Virginia sheet mill in Mason County, W.Va.

Annual contract negotiations between buyers and mills in the US flat-rolled steel market are picking up pace as both look to lock in volume for the coming year. As these contracts are finalized, we expect that changes in the market will impact how 2024 contracts are ultimately structured. The primary change in the market is […]

U.S. Steel on Thursday said it planned to increase spot base prices for steel sheet by at least $100 per ton ($5 per cwt).

Cleveland-Cliffs said on Thursday it's targeting a minimum base price for hot-rolled steel of $800 per net ton ($40 per cwt).

Nucor Corp. aims to raise base prices for hot-rolled coil to a minimum of of $800 per ton ($40 per cwt).

Sheet prices notched a third consecutive week of gains on limited supply and stable demand outside of automotive operations impacted by the UAW strike.

Steel Dynamics Inc. (SDI) plans to take a four-day outage at its sheet mill in Butler, Ind., according to sources familiar with the matter.

Sheet prices moved upward for the second week in a row despite the ongoing UAW strike and concerns in some corners that momentum from a price hike last month might be fading, market participants said.