On May 17, 2016, the Department of Commerce is scheduled to announce its final determinations in the AD investigations of imports of certain cold-rolled steel flat products from China and Japan and CVD investigation of imports of certain cold-rolled steel flat products from China. The investigations cover certain cold-rolled, flat-rolled, steel products, neither clad, plated, […]
On the 24th of May the US Department of Commerce is scheduled to announce their Final Determinations regarding the corrosion resistant trade suits against China, Korea, India, Taiwan and Italy. There is an expectation that the announcement may actually be more supportive of the domestic mill position than what was seen in the Preliminary Determinations. […]
On April 29, 2016, the Department of Commerce initiated an antidumping duty (AD) investigation of imports of certain carbon and alloy steel cut-to-length plate (CTL plate) from Austria, Belgium, Brazil, China, France, Germany, Italy, Japan, Korea, South Africa, Taiwan, and Turkey, and countervailing duty (CVD) investigations of imports of CTL plate from Brazil, China, and […]
US Steel claims trade secrets involved in creating Advanced High Strength Steel (AHSS) were stolen in a Chinese cyber-attack in January 2011. Information acquired included the particular chemistry for Dual Phase steel (grades 590, 780 and 980) and its coating; critical temperatures and holding times for heating, cooling, and coating the steel; and the capabilities […]
US Steel maintains that Chinese manufacturers and distributors use false documents and transship products through other countries to disguise the country of origin. Numerous antidumping and countervailing duty orders have been placed on Chinese steel products over the years. US Steel maintains that China continues to circumvent these orders by using such methods in violation […]
WASHINGTON, April 26, 2016 /PRNewswire/ — Today United States Steel Corporation (NYSE:X) filed a complaint with the U.S. International Trade Commission (ITC) to initiate an investigation under Section 337 of the Tariff Act of 1930, against the largest Chinese steel producers and their distributors. The 337 complaint alleges illegal unfair methods of competition and seeks […]
The United Steelworkers have retracted their petition to bring Section 201 action on imports of primary unwrought aluminum. The USW filed the petition on April 18 but is suspending it due to lack of industry support. The April 22 statement from the USW follows: “We have decided to suspend our petition seeking action to restore […]
The United Steelworkers filed a petition this week under Section 201 of U.S. trade law to attempt stem imports of primary unwrought aluminum. We are reporting on this because a number of companies/organizations having begun calling for the use of Section 201 to help stem unwanted steel imports (see article in tonight’s newsletter written by […]
The following is a quick update on the status of the flat rolled trade cases (hot rolled, cold rolled and corrosion resistant) and what are the next important dates to remember. The corrosion resistant, which covers galvanized, Galvalume and related products such as galvanneal and aluminized, are scheduled to have the Final Determination by the […]
Last week hearings were held in Washington, D.C. regarding the plight of the domestic steel industry, world over-capacity of steel production (with a special emphasis on China). During the hearings a number of trade remedies were mentioned such as Section 201 and Section 232 along with the antidumping and countervailing duty flat rolled steel trade […]
The global steel industry situation and its impact on U.S. steel industry is the topic of discussion this week at hearings held by the United States Trade Representative and Department of Commerce in Washington DC. Representatives from the steel industry, manufacturing, mining and Congress are giving their opinions and suggestions during three days of hearings, […]
“Antidumping and countervailing duty (AD/CVD) measures are unable to fix the low-price problem afflicting U.S. steel producers because they amount to no more than a band-aid that can’t heal the wound.” That is the opinion of Daniel R. Pearson, a senior fellow at the Cato Institute’s Herbert A. Steife Center for Trade Policy Studies. With […]
India has initiated an antidumping investigation into HRC, steel sheet and plate imports from China, Japan, Korea, Russia, Brazil and Indonesia. The products under investigation include HRC of width up to 2100mm and thickness up to 25mm, HR sheet and plates of a width up to 4950 mm and thickness up to 150mm. India steelmakers […]
A week ago Steel Market Update reported that three domestic steel mills would file an antidumping suit against a number of foreign countries who have been exporting cut-to-length (CTL) plate to the United States. On Friday the three mills identified in our earlier reporting filed their petition. A trade petition against 12 countries was filed […]
According to ArcelorMittal USA comments made during the Association of Steel Distributors meeting over the weekend which SMU attended, a trade case on steel plate imports will be filed within the next few weeks. ArcelorMittal along with Nucor and SSAB have been working on the documentation for an extended period of time and our understanding […]
The Canadian International Trade Tribunal (CITT) issued a final determination today (March 29) that finds Canadian producers have been injured due to the dumped and subsidized imports of certain carbon and alloy steel line pipe from China. The investigation was initiated by the CBSA on August 28, 2015 following complaints filed by EVRAZ North America […]
With the announcement of the Preliminary Determination regarding dumping (AD) of hot rolled steel into the United States by Australia, Korea, Japan, Brazil, the Netherlands, United Kingdom and Turkey, the next step in the process is for the US Department of Commerce to travel overseas and verify the information received from the countries involved. Looking […]
There is much more to each of the trade cases than the preliminary and final announcements might have you believe. There are inconsistencies in the rulings where attorneys and clients alike scratch their heads to figure out how the U.S. Department of Commerce came up with their preliminary determination deposit rates. The second item not […]
U.S. manufacturers are taking a firm stance against market economy status for China. AISI announced formation of a coalition, Manufacturers for Trade Enforcement, to oppose China’s request for market economy designation at the end of 2016. The coalition says China does not meet the established criteria for a market economy. “Our industries can compete against […]
The US Department of announced this evening that evidence of dumping (antidumping or AD) existed on imports of hot rolled steel from Australia, Brazil, Japan, Korea, the Netherlands, Turkey and the United Kingdom. Dumping duties ranged from a low of 3.97 percent out of Hyundai Steel Company in Korea to a high of 49.05 percent […]
The U.S. Department of Commerce (US DOC) is scheduled to release their Preliminary Determination of Antidumping (AD) against Australia, Brazil, Japan, Korea, the Netherlands, Turkey and the United Kingdom. This is the third and final Preliminary Determination to be announced on flat rolled steel products. Previously we saw rulings on corrosion resistant (galvanized/Galvalume) and cold […]
The following is a reprint of an article by Dr. Mark J. Perry in response to the Wall Street Journal article about the duties imposed on imports of cold-rolled steel from China that SMU publisher John Packard was quoted in. Dr. Perry is a Scholar at The American Enterprise Institute and Professor of Finance and […]
Reaction to the US Department of Commerce (DOC) preliminary duties on cold-rolled steel has been mixed, depending on what side of the antidumping determination the commentators are on. In the UK, the steel sector is readying itself for further onslaught of Chinese exports while its own steel exports to the U.S. are assigned dumping margins […]
This evening the U.S. Department of Commerce released their Preliminary Determinations on cold rolled from Brazil, China, India, Japan, Korea, Russia and the United Kingdom. Each country was found to be exporting cold rolled into the United States at less than fair value. However, the degree of the penalties ranged from a low of 2.17 […]
President Barack Obama signed into law Wednesday the Trade Facilitation and Trade Enforcement Act of 2015. The customs bill which includes the ENFORCE Act has been strongly supported by the U.S. steel industry. Minnesota Gov. Mark Dayton spoke with the President at the National Governor’s Association in Washington, DC on Monday on the need for […]
The Department of Commerce is initiating a circumvention inquiry on imports of cut-to-length steel plate from China following a petition from Nucor and SSAB. The two steel mills assert that producers, exporters and importers are circumventing duties imposed on CTL by adding alloys, such as boron, titanium and chromium to the product. The Department of […]
The Department of Commerce has announced affirmative preliminary determinations in the antidumping investigations of imports of heavy walled rectangular welded carbon steel pipes and tubes from Korea, Mexico, and Turkey. The investigations cover heavy walled rectangular welded carbon steel pipes and tubes, which are rectangular (including square) welded carbon steel pipes and tubes that have […]
Last week, the Senate passed the Trade Facilitation and Trade Enforcement Act of 2015 (TFTEA). The bill contains important provisions of the Enforcing Orders and Reducing Customs Evasion (ENFORCE) Act that have been promoted by the U.S. steel and manufacturing industries to combat evasion of antidumping and countervailing duties . Evasion is defined as failing […]
The Trade Facilitation and Trade Enforcement Act of 2015 passed by a margin of 75-20 in the Senate this morning. The customs bill has been advocated by the steel industry to strengthen measures to combat unfairly traded and subsidized imports. The bill now moves to the President for anticipated approval and signature. The American Iron […]
After five years of negotiations, the twelve nations of the Trans Pacific Partnership signed the trade agreement in a ceremony in New Zealand on February 4. The signing was celebrated by the trade ministers but the agreement must still be officially approved by the individual nations. The countries have two years to ratify TPP through […]