Orders for durable goods declined 0.1 percent in September after August orders were revised to a 0.3 percent increase. Economists had expected an increase in orders of between 0.1 and 0.2 percent. Volatility in the transportation equipment sector continued with orders decreasing 0.8 percent after two consecutive monthly increases. Excluding transportation, new orders were up […]
Steel Market Update is a member of an association connected to the construction industry called HARDI. HARDI stands for Heating, Air-conditioning & Refrigeration Distributors International. HARDI and the Institute for Trend Research (ITR), an economic forecasting company, work together to gather economic data to provide a forecast to the HARDI members located in the United […]
Chinese steel trade data was recently released for the month of September 2016, providing updated data on iron ore imports, scrap imports, and flat rolled imports and exports. Chinese imports of iron ore in September were 92,990,000 metric tons, an increase of 6.0 percent from the previous month and an increase of 8.0 percent from […]
Manufacturing activity in the Fifth District slowed in October according to the Survey of Manufacturing Activity produced by Federal Reserve Bank of Richmond. The composite Index registered -4, improving from -8 in September and -11 in August. New orders and backlogs decreased in October but remained in negative numbers. The shipment index climbed from contraction […]
Steel Market Update is a member of an association connected to the construction industry called HARDI. HARDI stands for Heating, Air-conditioning & Refrigeration Distributors International. HARDI and The Institute for Trend Research (ITR), an economic forecasting company, work together to gather economic data to provide a forecast to the HARDI members located in the United […]
The following article on the hot rolled coil (HRC) and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel What a difference a week makes. Last week we were flush with HR offers but buyers were scarce this week the market view appears […]
Please see the end of this report for an explanation of data sources. The Broad Index value of the US $ is reported several days in arrears by the Federal Reserve, the latest value we have was dated October 7th, Figure 1. The dollar has lacked direction since early May as traders have correctly anticipated […]
Manufacturing in New York State in October was at its lowest point since May of this year. The Federal Reserve Bank of New York reported the Empire State Manufacturing Index slipped five points to -6.8 this month. The Index has been in contraction for three consecutive months, dashing economist expectations for growth in the New […]
On Friday this week the Bureau of Labor Statistics (BLS) released its series of producer price indexes, for more than 10,000 goods and materials. For an explanation of this program see the end of this piece. The latest release this week reported results through September. We run this analysis every three or four months to […]
The following article on the hot rolled coil (HRC), busheling scrap (BUS), and financial futures markets was written by David Feldstein. As Flack Steel’s director of risk management, Dave is an active participant in the hot rolled coil (HRC) futures market and we believe he will provide insightful commentary and trading ideas to our readers. […]
In September net job creation was 156,000 July was revised down by 23,000 and August revised up by 16,000. Using a 3MMA, the result for September was 192,000 down from 230,000 in August. Figure 1 shows the 3MMA of the number of jobs created as the brown bars since 1990. These numbers are seasonally adjusted […]
The World Steel Association (worldsteel) released its Short Range Outlook for 2016 and 2017. According to the new report, global steel demand will increase by 0.2 percent to 1,501 million tonnes in 2016. Steel demand contracted by 3.0 percent in 2015. The 2017 forecast is for global steel demand to grow 0.5 percent to 1,510 […]
This report summarizes total steel supply from 2003 through August 2016 and year on year changes. It then compares domestic mill shipments and total supply to the market. It quantifies market direction by product and enables a side by side comparison of the degree to which imports have absorbed demand. Sources are the American Iron […]
We include here an unabridged statement from the IMF that was released on Tuesday this week which forecasts economic growth for all regions and nations through 2021. The IMF reduced its forecast for economic growth in the US in 2016 from 2.4 percent in the April forecast to 1.68 percent and in 2017 from 2.5 […]
Global manufacturing is being hampered by weak trade said IHS Markit. The September JP Morgan Global Manufacturing PMI, compiled by Markit, rose slightly to 51.0 from 50.8 in August but failed to show any significant growth in the global manufacturing industry. The global report of 28 countries showed only eight reporting deteriorating manufacturing conditions in […]
The Manufacturing ISM Report on Business showed manufacturing expanding in September after contracting in August. The Institute for Supply Management reports the September PMI was 51.5 percent, up 2.1 percent from the previous month. New orders, production and employment gained 6, 3.2 and 1.4 percentage points, respectively. The index for inventories of raw materials rose […]
Virgin Atlantic and LanzaTech are experimenting with a new jet fuel made from waste industrial gases from steel mills. Lanzanol, a low carbon ethanol fuel is derived via a fermentation process from carbon monoxide gases produced during steel manufacturing. The alcohol-to-jet process was developed in collaboration with the Pacific Northwest National Lab (PNNL) with support […]
Hot rolled coils settled September on the CME at $542 per ton while Platts ($539 average) and SMU ($530 average) saw market prices as being weaker. The SMU Price Momentum Index pointed toward lower prices throughout the month and ended the month suggesting prices will continue to slide as we move into the month of […]
Last week’s Federal Reserve manufacturing reports showed mixed results in September. Kansas City, Dallas, and Richmond Federal Reserves all reported expansion in production levels but manufacturing conditions remained soft, especially in the Dallas and Richmond areas. Kansas City The Kansas City index came in at 6.0 for its best reading since December 2014 and its […]
The September Chicago Business Barometer indicated that production was at its highest level since January of this year. The Barometer rose 2.7 points to 54.2 on strong gains in production. The production index jumped 7.3 points to 59.8 while new orders remained unchanged from August. Backlogs remained below the neutral point of 50. Supplier deliveries […]
The Fed once again elected not raise rates in their September 21st announcement. On the 22nd Ian Bezek had this to say: “For those who wanted decisive action, the Fed’s latest move failed to please, however, there were three dissenters against the decision – a large number for the Fed – and the vast majority […]
The annualized GDP growth rate in the third estimate of the second quarter of 2016 was 1.41 percent which was slightly above the consensus expectation of 1.3 percent and an improvement from the first estimate which was 1.2 percent. GDP is measured and reported in chained 2009 dollars and in the third estimate of Q2 […]
The following article on the hot rolled coil (HRC), busheling scrap (BUS), and financial futures markets was written by David Feldstein. As Flack Steel’s director of risk management, Dave is an active participant in the hot rolled coil (HRC) futures market and we believe he will provide insightful commentary and trading ideas to our readers. […]
The source of this data is the Conference Board with analysis by Steel Market Update. Please see the end of this piece for an explanation of the indicator. Consumer Confidence jumped from 92.4 in May, its lowest value since July last year, to 101.1 in August, then to 104.1 in September, it’s highest value since […]
Durable goods orders were flat in August after making gains in July. In the latest report by the Department of Commerce, new orders for manufactured durable goods, excluding transportation were down 0.4 percent, and orders excluding defense were down 1.0 percent. Orders for core capital goods, a proxy for business spending which excludes both military […]
We received the following comments from a member of the financial investment community regarding the suits just filed by the domestic mills alleging the transformation of hot rolled to cold rolled or coated from China in Vietnam was just a way for China to circumvent U.S. trade duties. The complaint states that the transformation of […]
The following article on the hot rolled coil (HRC) and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: The focus in HR this past week has been primarily in Q4’16 and 1H’17. Futures prices have dropped to the psychological $500 level […]
The following article on the hot rolled coil (HRC), busheling scrap (BUS), and financial futures markets was written by David Feldstein. As Flack Steel’s director of risk management, Dave is an active participant in the hot rolled coil (HRC) futures market and we believe he will provide insightful commentary and trading ideas to our readers. […]
The Empire State Manufacturing Index remained below the zero “no growth” level at -2.0 in September for the second consecutive month. Analysts point to weak export orders and sluggish business investment by the manufacturing sector. New orders dropped eight points to -7.5 and shipments plunged 18 points to -9.4. Indexes for unfilled orders and delivery […]
Both these data points are reported in the Federal Reserve G17 data base. The index had an all-time high of 106.70 in November 2014 and trended down until June this year when it experienced a two month turnaround followed by a slight decline in August to 104.402. The three month moving average (3MMA) had positive […]