Global crude steel production was estimated at 147.3 million metric tons in October as output was up by 1.6 million metric tons — 1.1% higher than the same period last year, the World Steel Association (worldsteel) reported. Last month’s estimated production was down sequentially, however, declining by 2.9%, or by 4.4 million metric tons from September’s […]
Raw steel production by US mills edged back down last week. The marginal week-on-week (WoW) decline brought output to its lowest weekly total all year, keeping both utilization and output at their lowest levels in nearly two years, according to the latest data from the American Iron and Steel Institute (AISI). Domestic steel output was […]
Existing-home sales declined in October, retreating for the ninth straight month, according to the National Association of Realtors (NAR). All four major US regions saw sales decline both month-on-month (MoM) and year-on-year (YoY) in October. October sales fell 5.9% from September to a seasonally adjusted annual rate of 4.43 million units. Total registered sales were […]
The outlook for multifamily construction closed the third quarter on a low note, as confidence in the market for new multifamily housing declined significantly during the period, according to the National Association of Home Builders’ (NAHB) Multifamily Market Survey (MMS). The MMS’s two separate indices saw mixed results. The Multifamily Production Index (MPI) fell 10 […]
Just about half of US states added construction jobs in October, while a wave of job openings remained unfilled, according to the Associated General Contractors of America (AGC). AGC said that open positions at the end of September exceeded the total number of employees hired during October. The lack of qualified applicants last month led to […]
US plate prices were down marginally last week as spot tons garnered some discounting on limited demand. Plate tags have been eroding slowly in recent weeks with buyers largely on the sidelines. That’s a shift from late October and early November, when prices were roughly flat. Buyers’ focus remains almost exclusively on managing inventories as […]
Producer prices came in below expectations in October, adding to hopes that inflationary pressures are beginning to ease, the US Labor Department reported. Last month’s Producer Price Index (PPI), a measure of the prices received for final-demand products, advanced just 0.2% month-on-month (MoM) and 8% from a year ago, the smallest annual gain in more […]
Housing starts fell by 4.2% in October to a seasonally adjusted annual rate of 1.43 million units, according to a report from the US Department of Housing and Urban Development and the US Census Bureau. The decline came as elevated mortgage rates, rising construction costs, and waning demand stemming from high home costs drag on […]
The prices contractors pay for construction materials and services — chiefly for new nonresidential construction — jumped 20.2% year-on-year (YoY) in October and were up 3% month-on-month (MoM), the Associated General Contractors of America (AGC) reported in its latest analysis of government data. AGC cautioned that higher construction costs could undermine demand for projects, and urged […]
Monthly Key Market Indicators (KMI) have steadily improved since reaching their most recent low in July, though steel buyer sentiment recently tumbled to a 26-month low, according to the latest analysis by Steel Market Update. Positive and neutral indicators have increased, while negatives have eased. Despite some recent improvements, present headwinds are still notable. The […]
Exceeding expectations, business activity in the state of New York improved in November, moving into positive territory for the first time in four months, according to the Empire State Manufacturing Survey. The New York Fed’s Empire State headline general business conditions index — a gauge of manufacturing activity in the state — recovered by 13.6 […]
North American auto assemblies rose by 8.7% in October, rebounding from a similar decline in September. Last month’s assembly output was the third-best total year-to-date (YTD) and nearly 22% higher year-on-year (YoY), according to LMC Automotive data. Though the market remains supply-constrained due to ongoing parts and supply shortages, production in October continued to show signs […]
US light vehicle (LV) sales grew in October, coming in at an unadjusted figure of 1.15 million units. Last month’s total was a 9.5% increase year-on-year (YoY), the US Bureau of Economic Analysis (BEA) reported. October was the third consecutive month to see YoY increases in sales. Prior to August, YoY sales gains had not been […]
Raw steel production by US mills edged up last week, ending a three-week slide. The marginal week-on-week (WoW) increase did little for production, keeping utilization and output at their lowest levels in nearly two years, according to the latest data from the American Iron and Steel Institute (AISI). Capability utilization has now been below the 80% […]
Housing costs continue to rise in the third quarter. New homes are now more expensive than they’ve been in more than a decade, the National Association of Home Builders (NAHB) said. The result: the housing market has tipped into a recession. The trend has been driven by rising mortgage rates, ongoing building material supply chain […]
The construction industry added just 1,000 employees in October as firms competed to hire from a small labor pool, the Associated General Contractors of America (AGC) reported after analysis of new government data. The dynamic has continued to drive hourly wages higher, illustrating the struggle construction firms face in their search for qualified workers, the […]
Imported sheet and plate products arrived at US ports at a slower clip in September, accounting for a lower share of the domestic market for the third straight month. That’s according to a Steel Market Update analysis of import data from the US Commerce Department and domestic shipment figures from the American Iron and Steel […]
Total US mill shipments of steel products were down in September, falling to their lowest total year-to-date (YTD). Mill shipments have been fluctuating up and down all year with little consistency. September’s shipments totaled 7.58 million tons, a 7.2% decline from August’s 8.18 million tons, and the lowest total since February 2021. Apparent supply also saw a […]
Steel prices continue to slide, and apparently so does sentiment. Based on SMU’s latest check of the market, sheet prices once again fell across the board, grinding lower and nearing levels some never expected to see again. Speculation that hot-rolled coil (HRC) prices will be at or near the $600-per-ton mark takes center stage with […]
Engineered pipe and tube producer Northwest Pipe Co. posted sharply higher profits for the third quarter ended Sept. 30. The Vancouver, Wash.-based company said the boost was driven by strong demand and increasing backlogs from its engineered pipeline systems and precast products, according to earnings data released on Tuesday, Nov. 8 All told, Northwest Pipe posted net […]
US construction spending in September totaled $1.811 trillion at a seasonally adjusted annual rate (SAAR), just 0.2% above August after August’s 0.6% decline. The unexpected rebound in September came amid a surge in nonresidential investment that offset declining outlays on single-family homebuilding, according to data from the US Commerce Department. The month-on-month (MoM) increase was […]
The US labor market added 261,000 jobs in October, down from an upwardly revised total of 315,000 payroll gains the month prior. Last month’s total, though better than expected, still marked the slowest pace of job gains since December 2020, according to data from the Bureau of Labor Statistics (BLS). The decline in payroll gains […]
The US economy added 261,000 new jobs in October, outperforming consensus expectations but still decelerating to the slowest pace since December 2020, according to data from the US Department of Labor. In contrast, the unemployment rate moved higher last month to 3.7%, after estimates expected the October measure to remain sideways and match the five-decade […]
Raw steel production by US mills continued to slide for a third consecutive week, keeping utilization and output at their lowest levels in nearly two years, according to the latest data from the American Iron and Steel Institute (AISI). Capability utilization has now remained below the 80% mark for 17 straight weeks. Domestic steel output was […]
The Dodge Momentum Index registered 199.7 in October, up 9.6% from 182.2 September, according to data and analytics from the Dodge Construction Network. Dodge is the leading index for commercial real estate, using the data of planned nonresidential building projects to track spending in the sector for the next 12 months. For October, the index’s subcomponents also […]
Nucor on Thursday confirmed its plate prices would remain unchanged with the opening of its December order book. Though the market was anxiously awaiting the Charlotte, N.C.-based steelmaker’s announcement, few were surprised by it. Why? It’s not clear that a price decrease at this stage in the fourth quarter would generate buying. And it would devalue […]
Service center chain Olympic Steel posted sharply lower earnings in the third quarter ended Sept. 30 driven by a significant decline in metals prices, according to the company’s Nov. 3 earnings report. The Cleveland, Ohio-based metals service center and processor reported net earnings of $12 million in Q3, down 68% sequentially and 74% year-on-year (YoY). The dip […]
Spending on nonresidential construction now outpaces residential construction projects, the Associated General Contractors of America (AGC) reported. Construction spending hit $1.811 trillion at a seasonally adjusted annual rate in September, a 0.2% increase versus August and up nearly 11% year-on-year (YoY). “Demand remains strong for a range of nonresidential construction segments despite supply chain challenges […]
Marubeni-Itochu Steel America Inc. (MISA) has acquired Worthington Specialty Processing (WSP), a joint venture between Worthington Industries and United States Steel Corp. The New York-based value-added steel and aluminum processor and North American subsidiary of Japan’s Marubeni-Itochu Steel Inc. acquired WSP’s only remaining facility in Jackson, Mich. in an all-cash deal for an undisclosed sum. […]
Apparent demand for flat-rolled steel in the US edged down slightly in SMU’s latest analysis of demand and lead time dynamics. Despite the slight decline in the latter half of October, the month’s SMU Steel Demand Index closed out roughly 2.5 points above September’s reading but remained in contracting territory for the sixth straight month […]