Service centers and and other buyers traditionally jump into the market to buy ahead of rising steel prices. Steel prices are clearly on the rise, but only about one-third (33 percent) of buyers responding to Steel Market Update’s questionnaire this week said they feel it’s time to add inventory. Their comments reveal some disagreement about […]
Lead times for spot orders of flat rolled and plate steels continue to extend and are around two weeks longer than in April at the depth of the pandemic as demand recovers and supplies tighten. Lead times for hot rolled now average five and a half weeks, cold rolled and galvanized over seven weeks, and […]
With steel prices on the rise and another round of increases in play, the mills appear to have the upper hand in negotiations. The mills are holding the line in price talks on hot rolled, cold rolled and coated steel orders, as well as plate, according to respondents to Steel Market Update’s market trends questionnaire […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines other metallic coated imports (mainly Galvalume) by region through July 2020. In July, OMC imports were down by 1.3 percent at the […]
Nothing like a spike in steel prices to give the market a much needed attitude adjustment, one the mills and service centers can really use as the pandemic continues to weigh on day-to-day operations and individuals’ emotions. Steel prices have jumped by nearly $140 per ton in the last month. SMU’s Steel Buyers Sentiment Index, […]
Better-than-expected demand and higher scrap prices have allowed the mills to boost flat rolled and plate steel prices, with the benchmark average for hot rolled reaching $580 per ton, according to Steel Market Update’s check of the market this week. With a few mills announcing new increases on flat rolled on Monday and Tuesday, the […]
Steel Market Update’s check of the market this week shows prices for hot rolled, cold rolled and coated steels up by $20-30 per ton as demand continues to improve, lead times extend and scrap prices rise. The benchmark price for hot rolled steel now averages $540 per ton, up $100 from the low point in […]
Lead times for spot orders of flat rolled and plate steels have extended by about a week over the past month as demand continues to recover and buying picks up ahead of rising prices. Lead times for hot rolled now average nearly five weeks and coated products more than seven weeks. Lead times are an […]
Flat rolled steel is no longer a buyer’s market as the mills appear less willing to negotiate while they try to collect the price increases they announced late last month. Steel Market Update’s market trends questionnaire this week shows the majority of buyers reporting mills holding the line in price talks on hot rolled, cold rolled […]
Mills have hiked prices on flat rolled and plate steels in the past 10 days and it appears they will collect at least a portion of the increases. Steel Market Update’s check of the market this week shows prices up as much as $30 per ton, depending on the product, on top of a $10 […]
Among steelmaking raw materials, the prices of iron ore, pig iron and zinc have seen big gains in the past three months. Scrap prices have been challenged, but saw some improvement in August, notably in the coastal regions, and are expected to rise in September, lending support to higher finished steel prices. Table 1 summarizes […]
Prices for flat rolled steel products moved up by as much as $20 per ton in the past week, while plate increased by $10, according to Steel Market Update’s check of the market on Monday and Tuesday. SMU’s Price Momentum is higher on sheet products, but Neutral on plate products, as the plate mills’ price […]
Galvalume supplies are shaping up to be tight in the fourth quarter, but fears of a shortage may be overstated, sources tell Steel Market Update. Despite a recent press report to the contrary, Galvalume is one of the strongest steel sectors right now. “There is no shortage at the right price,” said one mill executive. […]
Last week Steel Market Update adjusted all of the flat rolled price momentum indicators from Neutral to Higher. We made the decision to move hot rolled, cold rolled, galvanized and Galvalume to higher due to prices already beginning to track up from the low levels achieved over the past couple of weeks. We also made […]
Steel Market Update’s check of the market this week shows hot rolled offers typically in the $460-$480 range. But sources tell us actual transactions are occurring anywhere from $480 down to $400, depending on volumes and other considerations. Thus, SMU puts the current benchmark price for hot rolled at $440 per ton, down $10 from […]
Steel Market Update’s check of the market this week shows flat rolled steel prices firming up a bit as demand slowly recovers from the coronavirus disruptions. SMU puts the current benchmark price for hot rolled at $465 per ton, up from $440 last week. SMU’s Price Momentum Indicators remain at Neutral, though the market may […]
The service center and manufacturer executives who read Steel Market Update have been telling us for some time that they believe steel prices are near the bottom and poised to turn around soon. Our latest check of the market, with flat rolled steel prices up anywhere from $15 to $25 per ton, suggests the market […]
Lead times for spot orders of flat rolled steel from the mills were at their shortest in the week of April 30 as orders dried up due to the coronavirus. Since then lead times have extended by about half a week, but saw only minor fluctuations in June and July. Currently, lead times for hot […]
Lead times for spot orders of flat rolled steel are stretching out as demand improves and the mills get busier. Lead times for hot rolled and plate steels have extended past four weeks, while lead times for cold rolled and coated are now longer than six weeks. Lead times are an indicator of steel demand—longer […]
Steel buyers maintain their strong position in price negotiations with steel makers as demand slowly recovers from the coronavirus. The vast majority of those responding to Steel Market Update’s questionnaire this week report that the mills are willing to compromise on price to win orders. Nearly all the hot rolled buyers (91 percent) said the […]
Negotiations between buyers and the mills appear to be tightening as steelmakers attempt to firm up prices in response to improving demand. Steel Market Update’s market trends questionnaire this week shows significantly more mills holding the line in price talks on hot rolled, cold rolled and galvanized steel orders compared to earlier in August. About […]
Steel Market Update’s check of the market over the past two days shows that nearly 70 percent of steel buyers believe prices are near a bottom, and the numbers support that view, showing little variation from last week. SMU puts the benchmark average price for hot rolled steel at $450 per ton, unchanged from last […]
Steel Market Update’s check of the market this week shows flat rolled and plate steel prices falling by a further $10, taking the benchmark hot rolled price down to $450 per ton. Most respondents expressed doubts that the price increase announced last week by the integrated mills will gain any traction, especially since the minimills […]
Lead times for spot orders of flat rolled and plate steel have seen relatively little change over the past month, but remain about a half week shorter than this time last year as the market tries to come to grips with doing business in a pandemic. Lead times are an indicator of steel demand—shorter lead […]
Steel buyers clearly have the upper hand in negotiations with steel makers given the challenging market conditions from the virus, with overwhelming percentages of those responding to Steel Market Update’s questionnaire this week reporting that the mills are open to price negotiations to win orders. Nearly all the hot rolled buyers (96 percent) said the […]
Hot roll steel held its own this week, remaining at an average price of $460 per ton. Cold rolled, galvanized and Galvalume prices slipped by a further $5-10 per ton, however, based on Steel Market Update’s latest check of the market. SMU will leave its price momentum indicators unchanged—pointing lower for HR, CR and galv—until […]
Wholesalers who sell galvanized steel products to the HVAC sector remain surprisingly upbeat, despite weak steel prices and uncertain demand due to the coronavirus. In a conference call this morning, members of the Heating, Air Conditioning & Refrigeration Distributors International said they are benefiting from some pent-up demand, especially in the Northeast where state and […]
Flat rolled and plate steel prices continued to slide this week, down by $5 to $15 per ton depending on the product, reflecting the lower scrap prices and uneven demand in July. Steel Market Update’s Price Momentum Index continues to point toward lower prices for hot rolled, cold rolled and galvanized in the next 30 […]
Strong demand in China and easing of coronavirus restrictions in various parts of the world are lending support to global raw materials prices. Ferrous scrap prices are the notable exception as supplies have increased at a greater rate then demand, sending prices for both prime and obsolete grades downward. Table 1 summarizes the price changes […]
We are seeing further erosion in flat rolled steel pricing this week with the possible exception of Galvalume. Our sources are advising that hot rolled numbers are being offered in the low $400’s for tons. As capacity reopens at integrated mills, the possibility exists for HRC prices to breach the $400 per ton level for […]