Cleveland-Cliffs Inc. plans to take a 45-day maintenance outage at the big No. 7 blast furnace at its Indiana Harbor steel works in East Chicago, Ind., a company spokeswoman said. The planned outage, for a partial reline of the furnace, is scheduled to start on Sept. 1, she said. The No. 7 furnace has capacity […]
Mill shipments of steel products declined by 2.0% in April compared with the month prior, while apparent supply increased by 2.8% during the same period. April’s totals were a letdown from the strong performance in March, which saw shipments of steel products leap by 18.3% and apparent supply accelerate by 18.1%. This analysis is based […]
The U.S. Commerce Department has determined that coated flat-rolled steel made in Malaysia from Chinese or Taiwanese substrate circumvents U.S. anti-dumping and countervailing duties. As a result, coated product from Malaysia could be subject to duties of more than 200% if it is determined to be made from Chinese hot-rolled coil or cold-rolled coil, according […]
Mill shipments of steel products improved by 18.3% in March compared to the month prior, while apparent supply increased by 18.1% during the same period. The double-digit gains are even more impressive considering their low performance in February, the first decline in both apparent supply and shipments of steel since the market reached bottom back in […]
Steel Market Update has revised its blast furnace status chart to reflect that two furnaces at Cleveland-Cliffs’ Indiana Harbor steelmaking complex in East Chicago, Ind., have been razed. The No. 5 and No. 6 blast furnaces have not been operated since 2010, were decommissioned in 2015 and have since been demolished, a spokeswoman for the […]
Ternium remains on track to start up its new hot strip mill in Pesquería, outside of Monterrey, Mexico, on time, according to industry sources. The Latin American steelmaker has indicated that it expects to start up by early June and has already filled its June and July order books, market participants said. Ternium did not […]
NLMK USA shipments rose to 430,000 metric tons in the first quarter of 2021, a 10% gain from the fourth quarter of 2020. Strong demand for hot rolled and hot-dipped galvanized coil by key customers benefited sales as did the end of the strike at NLMK Pennsylvania. Revenue jumped 63% quarter over quarter to $403 […]
Mill shipments of steel products fell 9.8% month on month in February, while apparent supply was down by 12.5% during the same period. This is the first noticeable decrease in both apparent supply and shipments of steel since the market reached bottom back in May 2020. Mill shipments were down by 13.1% year on year, […]
Imports of flat-rolled steel jumped to their highest levels in nearly two years in March on increased shipments of coated products. The upswing included not only hot-dipped galvanized steel but also “other” metallic coated products, a category that includes material such as Galvalume. All told, the U.S. was licensed to import 800,789 metric tonnes of […]
Imports of flat-rolled steel jumped to their highest levels in nearly two years in March on increased shipments of coated products. The upswing included not only hot-dipped galvanized steel but also “other” metallic coated products, a category that includes material such as Galvalume. All told, the U.S. was licensed to import 800,789 metric tonnes of […]
Steel Market Update is pleased to share this Premium content with Executive members. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Mill shipments of steel products rose 6.9% month on month in January, while apparent supply was up by nearly 13.5% during the same period. Despite the continued growth month over month since […]
Mill shipments and supply of sheet products rose by nearly 6.5% month on month in December, a positive close to 2020. Plagued earlier on by COVID, sheet shipments stalled in last year’s second quarter. After reaching bottom in June, they have climbed steadily since. This analysis is based on steel mill shipment data from the […]
Import license data for February is not complete, but foreign arrivals of some flat-rolled steel products are already running ahead of January volumes, according to Commerce Department figures. And with lead times at domestic mills running close to or even with import arrival times, that trend might continue, some market participants said. Hot Rolled and […]
The upward trend in mill shipments and supply of sheet products continues, although the pace fell off as the fourth quarter carried on. After reaching bottom in June, as a result of the global pandemic, mill shipments and supply maintained a slow but steady upward trajectory through November 2020. This analysis is based on steel […]
By CRU Analyst Kevin Bai from CRU’s Steelmaking Raw Materials Monitor China has announced that it will remove the value-added tax (VAT) rebate it has historically applied to steel exports, alongside changes in import and export tariffs. This will increase the cost of exporting and discourage export volumes, which will help loosen a tight domestic […]
Metal coater AZZ Inc. has acquired privately held hot-dip galvanizing and zinc electroplating company Acme Galvanizing Inc. The deal, terms of which were not disclosed, includes all of Milwaukee-based Acme’s assets. The deal will extend the reach of Fort Worth, Texas-based AZZ into the Midwest, the company said. “With the acquisition of Acme, AZZ enhances […]
After reaching bottom in June, due largely to the global pandemic, mill shipments and supply of sheet products have since maintained a slow but steady upward trajectory. This analysis is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of Commerce. The analysis […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines hot-dipped galvanized imports by region through September 2020. In September, hot dipped galvanized (HDG) imports were down by 11.4 percent at the […]
Editor’s note 11/17/20: The data in the “Supply Tons YTD” column on Table 3 didn’t populate correctly, and therefore, was in error. Table 3 has now been updated accordingly. Mill shipments and supply of sheet products continue to see slight yet steady growth since reaching bottom in June. This analysis is based on steel mill […]
Editor’s note 11/3/20: Some of the data as originally published in Table 1 was incorrect due to a spreadsheet error (specifically the change in shipments 3M Y/Y column). The table has been updated with the correct information below. Mill shipments and supply of sheet products have turned, albeit slightly, since reaching bottom in […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines hot-dipped galvanized imports by region through July 2020. In July, HDG imports were down by 12.1 percent at the national level, but […]
Mill shipments and supply of sheet products began to turn around in June. This analysis based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export data from the U.S. Department of Commerce. The analysis summarizes total steel supply by product from 2008 through June 2020 and year-on-year changes. The […]
U.S. steel mills shipped 6,023,524 net tons in June, a 10.3 percent increase from the 5,461,851 net tons shipped in the previous month, but a 22.0 percent decrease from the 7,718,499 net tons shipped in June 2019, reports the American Iron and Steel Institute. Shipments year-to-date in 2020 total 41,218,207 net tons, a 14.5 percent […]
SMU contributor Tim Stevenson is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Tim’s previous role, he was a Director at Cargill Risk Management, and […]
Imports of rolled products through May, year over year, were not affected by the pandemic, but the longer-term decline continued, according to the latest Commerce Department data. Year over year, total rolled product imports in May were down by 24.8 percent on a three-month moving average (3MMA) basis. This was the seventh consecutive month where […]
By CRU Principal Analyst Josh Spoores and CME Group Commodities Research Analyst Gregor Spilker The CME Group recently launched a new steel futures contract which follows the U.S. hot-dipped galvanized (HDG) coil market. The U.S. Midwest Domestic Steel Premium (CRU) Futures is financially settled against the difference between U.S. Midwest hot-dipped galvanized coil (base) steel […]
In 2019, imports of hot dipped galvanized sheet into the Great Lakes represented more than half the national total, and this was one of only two regions to experience an increase in 2019. SMU presents a comprehensive series of import reports ranging from the first look at licensed data to the detailed look at volume […]
CRU’s U.S. Midwest hot-dipped galvanized (HDG) coil base price index will be used in the settlement of the CME Group’s new cash-settled U.S. Midwest Domestic Steel Premium (CRU) Futures contract. As announced earlier today by CME Group, the contract will settle on the premium of CRU’s HDG coil base price over the established CRU U.S. […]
Steel Market Update offers a comprehensive series of import reports ranging from the first look at licensed data to the very detailed look at volume by district of entry and source nation. The report you are reading now is designed to plug the gap between those two. National level import reports do a good job […]
NLMK USA’s sales fell 6.0 percent to 549,000 metric tons in the third quarter of 2019 compared to the second quarter, said NLMK Group in a trading update today. Declining volume was the result of decreased HRC sales due to lower demand from the tube and pipe sector. Shipments of hot-dipped galvanized (HDG) also decreased […]