Let’s put aside the question of whether the steel market has peaked. Let’s just assume that it has, for the sake of argument. Will the correction be gradual, rapid, or gradual until it’s rapid? I tend to think it will be the latter. But let’s put the question of timing aside and just look at […]
Market participants have sharply different views of which way prices will go over the next three months – but whichever camp you’re in, futures are your friend, according to one expert on the matter. Futures markets have seen steep selloffs in recent trading sessions, moves indicating that some industry participants think prices have peaked and are […]
Price dynamics in the steel market are starting to resemble an inverted yield curve, and market participants should treat the situation with appropriate caution. Plate mills and tube producers have announced significant price increases: $75 for tubular products ($3.75 per cwt), $80 per ton for plate and as much as $240 per ton for quenched and […]
At least two domestic pipe and tube mills have announced higher prices on the heels of higher hot-rolled coil costs, market participants said. Atlas Tube in a leading move said it was raising prices by at least $75 per ton ($3.75 per ton) for mechanical tubing, hollow structural sections (HSS) and piling products. The pipe-and-tube price […]
Evraz North America (NA) has followed other domestic mills in raising prices for steel plate. The increases are effective immediately for all new orders, the Chicago-based steelmaker, a subsidiary of London-based Evraz Plc, said in a letter to customers dated Monday, Sept. 27. Evraz NA is increasing transactions by at least $80 per ton ($4 […]
North Star BlueScope intends to take a 10-day outage in November at its flat-rolled steel mill in Delta, Ohio, according to SMU sources. The scheduled outage planned for the first week of November will be the final step to tie the new electric arc furnace and caster into the existing mill. The downtime is expected […]
Nucor has enough raw material to supply its planned $2.7 billion, 3-million tpy sheet mill, but is exploring new technologies that might help it further reduce carbon emissions. The Charlotte, N.C.-based steelmaker is eyeing a range of options – including increased use of shredded scrap in its sheet mills’ electric-arc furnaces (EAFs), “green” pig iron […]
Nucor plans to build a new, $2.7 billion electric-arc furnace (EAF) sheet mill with annual capacity of three million tons per year in either Ohio, Pennsylvania or West Virginia. The facility is aimed at customers in the Midwest and Northeast as well as at the automotive industry, the Charlotte, N.C.-based steelmaker said. “These important markets […]
Mill shipments of steel products rose 2.0% in July to 8.7 million tons, following an increase of 1.7% the month prior. Apparent supply jumped 3.6% in July after a 6.0% increase the prior month. July marks the fifth consecutive month of gains after February’s double-digit contraction. This analysis is based on steel mill shipment data from […]
Hot-rolled coil prices fell modestly this week for the first time in more than a year, lead times slipped below nine weeks for the first time since mid-April, and inventories continue to inch upward. Everyone is tired of hearing about a “tipping point” to this “unprecedented” market. But how else do you interpret this? Imports, […]
Nucor predicts that its third quarter earnings will be the highest in its history – surpassing a previous highwater market set in the second quarter. The Charlotte, N.C.-based steelmaker forecast third quarter earnings of $7.30-7.40 per diluted share, up from $5.04 per diluted share int the second quarter in guidance released on Thursday. And the […]
Editor’s note: Steel Market Update is please to share this Premium content with Executive members. For information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Producer prices expanded further in August, albeit at a slower rate. The gains continued, however, maintaining the historic climb for the index and subcategories for final demand, which have […]
The first rule of predicting steel prices in 2021 is you don’t predict steel prices. I broke that rule last month when I called a peak. I still think I was right about that. But timing is everything. And when exactly we hit that peak remains a matter of debate. Some market participants think we’re […]
Lobbying groups for U.S. steel mills and the United Steelworkers (USW) union want trade restraints placed on the EU to prevent potential “import surges” from the region. The call – from the American Iron and Steel Institute (AISI), the Steel Manufacturers Association (SMA) and the United Steelworkers union (USW) – comes even as the U.S. and the […]
We often talk a lot about hot-rolled coil prices in Final Thoughts. I’d like to take a deeper dive into coated prices today. It’s been an almost straight line up for an entire year for flat-rolled steel prices. And galvanized is no exception. Galvanized base prices are at $2,070 per ton ($103.50 per cwt). That’s […]
I was pleased to see many of you this past week in Atlanta at the SMU Steel Summit. It is certainly one of the largest (and most significant) steel conferences in the United States. This year was a first – a hybrid conference, with about 800 in-person attendees and 300 virtual. I doubt it will […]
Steel mills were supposed to see increased demand this summer as automakers ramped up production after putting the chip shortage in the rear-view mirror. That might no longer be the case. And now the COVID-19 pandemic is complicating matters further. Case in point: Dearborn, Mich.-based Ford Motor Co. is scaling back production of the F-150 […]
Mexican steelmaker Altos Hornos de México (AHMSA) has called off its deal with service center Grupo Villacero, according to regulatory filings in Mexico. AHMSA said it had scrapped the agreement with Alianza Minero Metalúrgica Internacional because of alleged “legal irregularities.” Alianza is a group of investors led by Grupo Villacero President Julio Villarreal, per Mexican […]
At least two U.S. plate mills – SSAB Americas and Evraz North America – have followed Nucor in raising plate prices. SSAB has increased prices by $85 per ton (Canadian $105 per ton) for commercial, non-quenched-and-tempered (Q&T) product and by $170 per ton (C$215 per ton) for Q&T material. “These increases are to be applied to […]
Veteran metals and mining analyst Timna Tanners will join boutique investment firm Wolfe Research LLC as a managing director. Tanners gained fame and notoriety as an equity research analyst at Bank of America (BoA) for her Steelmageddon® hypothesis – which posited that the collision of older integrated capacity and new electric arc furnace (EAF) capacity would […]
North Star BlueScope is commissioning a new melt shop at its flat-rolled steel mill in Delta, Ohio, with the first heat expected this month. And equipment installation for a ladle metallurgy furnace is “substantially complete” as well, North Star’s parent company – Australian steelmaker BlueScope – said in documents released with earnings data on Monday, Aug. […]
BlueScope Steel Ltd. posted record earnings in its 2021 fiscal year thanks to strong demand and record metal spreads. All told, the Australian steelmaker – the parent company of Delta, Ohio-based North Star BlueScope – recorded net profit of Australian $1.19 billion ($870 million U.S.) in its fiscal year ended June 30, 2021, up more […]
Mill shipments of steel products rose in June by 1.7%, following an increase of 1.9% the month prior. Apparent supply jumped 6.0% in June after a 1.3% increase in May. June’s gains were the fourth in as many months after February’s double-digit contraction. This analysis is based on steel mill shipment data from the American […]
Steel Market Update is pleased to share this Premium content with our Executive members. For information on how to upgrade to a Premium-level subscription, email Info@SteelMarketUpdate.com. Producer prices accelerated into midsummer, showing no signs of slowing down. The index and subcategories for final demand have fully recovered from the COVID-driven collapse and have overtaken pre-pandemic […]
Just because all major U.S.-based steel mills have reported quarterly results doesn’t mean that earnings season is over. Results from mills based abroad are coming in. And those of you still paying attention to earnings might have noticed a change in tone between when Steel Dynamics kicked things off on July 19 and when Evraz […]
Steel prices can’t go up forever and could correct downward from their historic highs later this year, steelmaker Evraz said. “Steel prices look unsustainable at current levels and there is a possibility of a gradual price decline in the coming months,” the company said in outlook commentary released with earnings data on Thursday, Aug. 5. […]
U.S. Steel plans to focus on organic growth – expanding its existing operations – rather than on mergers and acquisitions, company executives said. “Don’t be looking for us to add a bunch of capacity, look for us to build capability for profitable growth,” President and Chief Executive Officer David Burritt said during a conference call with analysts. […]
We talk a lot about the price of steel going up. We don’t talk as much about spreads between hot-rolled coil and prime scrap – which are going up just as fast if not faster. And if you’ve listened to earnings calls over the last two weeks, you know that steel mills and industry analysts […]
We talk a lot about the price of steel going up. We don’t talk as much about spreads between hot-rolled coil and prime scrap – which are going up just as fast if not faster. And if you’ve listened to earnings calls over the last two weeks, you know that steel mills and industry analysts […]
ArcelorMittal continues to forge ahead with major expansions at its North American operations on the heels of its best second-quarter profits since 2008. The multinational steelmaker recorded net income of $4 billion in the second quarter of 2021 after losing $559 million in the same quarter last year on sales that increased 76.2% to $19.3 […]