By John Packard On Saturday, Upstate Shredding held an open house for their new Port of Albany, New York recycling and shipping facility. What makes this one special is that the scrap operation sits on water which will provide the company with access to barge shipments to customers such as Nucor as well as ocean […]
We have 5 spots left open in our next Steel 101 workshop which will be held in Blytheville, Arkansas on October 8th and 9th. The workshop includes a tour of the Nucor Hickman EAF and rolling mill. Information about the workshop is on our website or you are welcome to contact our office: 800-432-3475. We […]
Written by: John Packard SMU thought our readers might be interested in what the domestic mills are “publishing” as lead times as of Monday of this week for new orders placed at that time. We have a number of mill lead times for you to review. AK Steel has informed their customers that their Middletown […]
Written by: John Packard Bucket Deals are Killing Regional Wholesalers and Small Distributors Somewhere along the line the idea of allowing flexible tonnage purchases on month to month tonnages originally pegged for spot purchases to go into “bucket deals” has been killing some of the smaller spot distributors and wholesalers. The worst time is now […]
House Subcommittee Presentations The American Iron and Steel Institute made its presence known last week on Capitol Hill. Top steel executives encouraged members of the House Energy and Commerce subcommittee on Commerce, Manufacturing and Trade to remedy government policies on tax, energy, infrastructure, environment and trade to strengthen American jobs in steel and other manufacturing […]
Nucor pushes back at potential competitor Written by: Sandy Williams Arkansas lawmakers are still delving into the feasibility of offering Big River Steel a $125 million incentive package. IHS Global Analysis was hired by the State of Arkansas to provide a third-party review of the Arkansas Economic Development Commission (AEDC) cost-benefit analysis for the proposed […]
According to SMU sources combined with an article written by Jose Manuel Saavedra & Ivo Ribeiro we have discovered that CSN has not yet made a firm proposal on the assets of ThyssenKrupp Steel Americas steel mills. The Brazilian article reported that CSN is requesting an extension of time in order to conclude their negotiations […]
Written by: Sandy Williams Nucor is expecting shares to drop by half in the first quarter of 2013, falling to $0.20 to $0.25 per diluted share from $0.43 per diluted share in the fourth quarter of 2012 and $0.45 per diluted share in first quarter 2012. Weak performance in sheet steel offset by improved profitability […]
Written by: Sandy Williams This year Nucor plans to spend $280 million on its Louisiana DRI facility and approximately $260 million towards its natural gas related investments. Essar Steel Minnesota is in talks to build a joint venture DRI plant. Voestalpine and Northstar Bluescope Steel are both considering DRI facilities. Severstal just postponed a DRI […]
Large steel buyers with whom Steel Market Update had direct contact with over the past few working days paint a picture of the domestic mills still uncomfortable leading on pricing. Although that may be changing as word starts to spread on the newest scrap pricing. We saw a widening of the range on hot rolled […]
Written by: John Packard I have been involved in the flat rolled steel industry since 1977. I cannot recall another time during those 36 years in the business when the domestic steel mills have announced two significant price increases within six weeks of one another – with the target minimum base price being exactly the […]
Steel buyers are scratching their heads while steel mills begin to line up announcing identical $50 per ton price increases on all flat rolled products. AK Steel was the first to follow U.S. Steel when they put out a press release advising their customers of their intention to raise spot prices by a minimum of […]
Question is can TK get two or more mills in a bidding war? Our sources advise SMU that the binding bids for the ThyssenKrupp Americas plants (Calvert, Alabama and CSA in Brazil) – the ones which truly count – are to be submitted by the end of this week. There are a number of prospective […]
Combination of higher zinc spot prices, competitive extras and higher zinc premiums are squeezing coating lines Galvanized converters are struggling to compete against mills with lower coating extras as LME Zinc spot prices have climbed from the low $.80’s per pound to recent high’s close to $1.00 per pound. Over the past few trading days […]
I was watching the daily results from our SMU steel survey which began on Monday of this week. I found it curious those working on Monday (a holiday to some, but not all in the U.S.) were much more negative than those who responded to our survey as the week progressed. Our SMU Steel Buyers […]
Written by: Sandy Williams The Arkansas Senate and House questioned a panel of economic development and finance officials last week on plans for the $1.1 billion Big River Steel project in Osceola, Ark. The meetings were a preliminary step in legislature approval of a $125 million bond issue for the proposed steel plant. The state’s […]
Written by: John Packard & Sandy Williams “Clear preference for cash” ThyssenKrupp AG officials declined to talk about the Steel Americas sale during their 1st Quarter 2013 earnings conference call, but CFO Guido Kerkhoff said he can say that the company has a “clear preference for cash” and that the bidders understand that message. The […]
Even as prices “firm” a bit from where they were one week ago, our SMU Price Momentum Indicator remains stuck in Neutral for the 10th consecutive week due to the following factors. We always prefer to give the domestic mills an opportunity to sell their price increases into the marketplace, so we automatically move to […]
Dear Editor, Once again, both Nucor and US Steel in their quarterly earnings calls partially blamed imports for their less than stellar results, and frankly, this is getting old. For the record, it is NOT illegal to import steel into the United States. It might be illegal if those imports were dumped (meaning sold below […]
As if the south is not already flooded with flat rolled steel mills, Arkansas Governor Mike Beebe and Big River Steel CEO John Correnti announced earlier today that if the bonds are approved by the Arkansas legislature a new $1 billion steel mill will be built in Arkansas. Details were lacking regarding the type of […]
Written by: Sandy Williams Nucor Corporation announced today that fourth quarter earnings were $136.9 million and flat compared to net earnings of $137.1 million in the same quarter of 2011. Earnings were up in the fourth quarter from $110.3 million in the third quarter of 2012. Total net earnings for 2012 were $504.6 million, compared […]
U.S. Steel verbally began telling their U.S. customers of their intention of raising spot flat rolled prices by $50 per ton. Price increase letters were sent to their customers by Nucor and NLMK USA as they advised their customers of their intention of raising flat rolled spot prices by a minimum of $50 per ton. […]
Written by: Sandy Williams Natural gas is providing cost savings for steel plants while at the same time creating more demand for steel products used in pipelines, drilling equipment and rigs. It is a win-win situation for the steel and the natural gas industries One of the ways natural gas is utilized by the steel […]
SMU has been asked about the status of the negotiations regarding the sale of the ThyssenKrupp Steel Americas assets. This includes ThyssenKrupp Steel USA and their sister facility in Brazil which produces slabs – CSA. We understand the due diligence process continues and a number of mills have been through both facilities. Based on SMU […]