I want to recognize the Steel Market Update writers who have been doing stellar work through a grueling work schedule. Last week, it was our conference where we had all hands on deck in order to make sure the conference ran smoothly. This week and this coming weekend (and probably all of next week), the […]
The growth of total construction spending is slowing, though still positive year over year. July data for construction put in place (CPIP) was released by the Department of Commerce on Friday. Total construction still shows positive growth, but slowed to 0.9 percent year over year in the latest three months of data. Privately funded projects […]
My final thoughts are going to be extremely brief this evening as I live close to the Atlantic Ocean in south Florida and there is a category 5 hurricane thinking about heading our way. So, we are in preparation mode and will move north and wait to see if it veers further west and into […]
Half of the 36 Key Steel Market Indicators released in August are historically positive, while only 19 percent are negative, and the balance fall within the normal range, in Steel Market Update’s view. Along with May, when the data was about the same, this is the best outlook since we began our analysis in January […]
Over the past three days, Steel Market Update (SMU) had all hands on deck for our 7th SMU Steel Summit Conference. The conference was once again held at the Georgia International Convention Center next to the Atlanta International Airport. We had record attendance with 661 executives registered compared to 434 last year. There were 309 […]
Good evening from Atlanta, site of our 7th SMU Steel Summit Conference. We announced this morning that attendance for this conference is a new record. We are pleased to announce we registered 661 manufacturing, steel and industry executives for this year’s conference, breaking last year’s 434 record. Our “Pre-Summit” Conference program on Monday attracted approximately […]
It’s the night before the start of our 7th SMU Steel Summit Conference in Atlanta. We are prepared and ready to go, but our thoughts and prayers are with those trapped in Houston and the surrounding communities in Texas. There are a great many people registered for our conference who are coming from the areas […]
Sales of new homes tumbled 9.4 percent to a seasonally adjusted annual rate of 571,000 and were 8.9 percent below the July 2016 estimate of 627,000. Median sales price was $313,700, compared to $310,800 in June, and at the highest July level ever. Average sales price was $371,200, down from $379,500 the previous month. Sales […]
Existing home sales slid 1.3 percent in July, according to data from the National Association of Realtors. The seasonally adjusted annual rate dropped to 5.44 million from the downwardly revised June total of 5.51 million for the lowest level of the year. The decline in sales was steepest for condominiums and co-ops, falling 4.8 percent […]
I am now in Atlanta and the workload and my focus, and that of Ray Culley, Brett Linton and Diana, are all on organizing every minute of the SMU Steel Market Update program, which begins at 2 PM ET on Monday. There are always a few hiccups along the way… something to make your day […]
In Steel Market Update’s (SMU) latest flat rolled steel market analysis, manufacturing companies and steel service centers are sending mixed messages regarding how flat rolled steel distributors are treating their spot end customers. Twenty-one percent of the manufacturing companies responding to last week’s flat rolled steel market trends questionnaire reported service centers were lowering prices, […]
Over the last few weeks, the price of zinc has risen to over $1.41 per pound on the London Metal Exchange, and I thought it was time for an update on a series of articles I’ve written on the actual metallic cost of coating steel with zinc. To do the calculation, I use a spreadsheet […]
Light vehicle assemblies in NAFTA declined sharply in July, according to data from Ward’s Automotive. Economy.com reported that U.S. vehicle sales totaled fewer than 17 million units at a seasonally adjusted annualized rate (SAAR) in July for the fifth consecutive month. Sales were 16.76 million units annualized in July, down 5.9 percent on a year-ago […]
I am stuck between a rock and a hard place. We are trying to accommodate everyone who wants to attend our 2017 SMU Steel Summit Conference even though we are technically sold out. We did manage to loosen up a few seats and those were gobbled up the moment we let people know they were […]
No one was surprised when major U.S. steel mills announced a $30 per ton price hike on flat rolled and plate this week. The price hikes were widely expected. But a majority (58 percent) of respondents to SMU’s latest flat roll market trends questionnaire will be surprised if the higher prices stick. Some predict the […]
Despite the ongoing delay in Washington, six of 10 respondents to SMU’s latest flat roll market trends questionnaire believe the Trump administration will eventually put new restrictions on foreign steel imports based on Section 232 national security concerns. Even more, 74 percent, believe the slowdown in the Section 232 decision is opening the door to […]
The Steel Market Update (SMU) Service Center Inventories Apparent Excess/Deficit forecast provided last month showed that the deficit in inventories being held by flat rolled distributors would shrink. We have worked with the MSCI carbon flat rolled shipment and inventory data and our model indicates the deficit did indeed shrink and is very close to […]
Tomorrow is the full eclipse of the sun in many areas of the country. Where I live in southern Florida, the sun will be 81 percent covered. About four hours drive north of here will be in the high 90 percent range. If you are lucky enough to be in an area where a total […]
Steel Market Update (SMU) is releasing our SMU Steel Buyers Sentiment Index for mid-August. The Index measures how buyers and sellers of flat rolled steel feel about their company’s ability to be successful both in the current market environment, as well as three to six months into the future. Overall, our Indexes remains optimistic. However, […]
Flat rolled lead times, the amount of time it takes for the steel mills to produce an order if placed today, have flattened out and are essentially unchanged over the past few months, according to data collected by Steel Market Update from manufacturers and steel service centers earlier this week. On Monday, Steel Market Update […]
Steel buyers and sellers reported mills slightly more open to steel price discussions, based on responses this week from Steel Market Update’s flat rolled market trends questionnaire, possibly reflecting the seasonal slowdown in sales activity. What makes the results collected on mills willingness to negotiate pricing especially interesting is the domestic steel mills began announcing […]
June’s rebound in housing starts was short-lived, according to data from the Department of Commerce on Wednesday. Housing starts dipped in July to a seasonally adjusted annual rate of 1,155,000, 4.8 percent lower than the June estimate and 5.6 percent below the July 2016 rate. Construction of single-family homes was relatively steady, slipping just 0.5 […]
The “woodie” automobile, popular in the 1940s and ’50s, may be on its way back, but in a seriously different mode. Japanese researchers are developing the latest challenge to automotive steel, a super-strength, lightweight product that uses wood as a raw material. Cellulose nanofiber, made from wood pulp, is mixed into plastics forming a product […]
I asked trade attorney Lewis Leibowitz recently to look into the requests for reviews of the antidumping and countervailing duties on CORE (corrosion resistant steel) and cold rolled. The U.S. Department of Commerce published notices on July 3, 2017, asking any of the countries/companies affected if they wished to have a one-year review of the […]
As was mentioned earlier in tonight’s newsletter, our 2017 SMU Steel Summit Conference will be a sell-out this year and the question really is what day this week will we close registrations? I am both surprised and humbled by the response we have gotten to this year’s event. Our team works very hard to put […]
Below is the latest data released by the the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) regarding residential and commercial heating and cooling equipment shipments through June 2017. You may read the press release on their website here. Residential Storage Water Heaters U.S. shipments of residential gas storage water heaters for June 2017 increased 0.3 percent […]
I was advised late on Friday afternoon that we should expect a Nucor price increase early next week. With scrap prices firming $10 to $30 per ton our expectation is for the increase to be $25-$30 per ton. Then the question will be will the industry support another increase after tepid (at best) support for […]
Even though the Trump administration has postponed a decision on Section 232, the possibility of trade action that will further restrict steel imports is still influencing the market, according to comments from service centers, manufacturers and trading companies gathered in last week’s Steel Market Update Flat Roll Market Trends questionnaire. Two-thirds of all steel buyers […]
Rumor vs. Fact – I was speaking with Tim Triplett (our Executive Editor who recently joined SMU after a 19 year stint at Metal Center News) and we were talking about the “rumor” of a potential price hike by Nucor. Tim raised the question, as members of the media, is it appropriate for us to […]
Flat rolled steel buyers are fairly optimistic about their chances for success in the current market, though the various metrics Steel Market Update uses to gauge future demand are sending mixed signals. One likely cause is the uncertainty injected into the market by the Trump administration’s now-delayed Section 232 investigation. According to the latest SMU […]