The SMU Steel Buyers Sentiment Index, which measures how buyers and sellers of flat rolled and plate steels feel about their companies’ ability to be successful both now and three to six months into the future, was slightly lower this week. Demand has stayed strong, and buyers and sellers of flat rolled steel generally remain […]
Mill lead times for hot rolled steel appear to have peaked in the current market cycle, while lead times for coated steels extended a bit in the past few weeks, according to Steel Market Update’s latest market trends data. Lead times for hot rolled now average about five and a half weeks, cold rolled about […]
Steel mills appear less willing to negotiate spot prices on hot rolled, cold rolled and coated steel than two weeks ago, according to respondents to this week’s Steel Market Update market trends questionnaire, perhaps reflecting events on the trade front. Mills may anticipate less competition from imports as a result of Trump’s tariffs. Every two […]
Nearly three out of four respondents to Steel Market Update’s market trends questionnaire this week say they predict flat rolled steel prices will move even higher from here. No doubt views were influenced by the Trump administration’s decision to stand firm on tariffs, even on imports from close trading partners in Canada, Mexico and the […]
A new wrinkle has been revealed for those manufacturers seeking exclusions for steel and aluminum products from Brazil, South Korea and Argentina. The three countries, which have agreed to quotas in lieu of tariffs, are not eligible for any product exemptions. A spokesperson for the Commerce Department confirmed the restriction in an email to Inside […]
The market was shocked when President Trump revoked the exclusions and implemented tariffs on steel and aluminum imports from the United States’ closest trading partners Canada, Mexico and the EU. In this week’s canvass of the market, Steel Market Update asked industry executives if they expect any direct impact on their businesses as a result. […]
As a trade war continues to build over the Section 232 steel and aluminum measures, some senators are looking to curb the president’s authority to unilaterally impose tariffs. Sen. Bob Corker (R-TN) is leading the effort along with Sen. Pat Toomey (R-PA) to challenge President Trump’s ability to levy trade restrictions on the grounds of […]
I have just returned from three days in Memphis where we conducted our Steel 101: Introduction to Steel Making & Market Fundamentals workshop. We had a packed house of motivated steel people from a wide variety of companies. Nucor Hickman and Nucor-Yamato did a great job of hosting our group as we toured both steel […]
Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following update on trade events in Washington: Canada, Mexico and the nations in the European Union threatened to retaliate against Trump administration tariffs they consider grossly unfair and, true to their word, have announced tariffs of their own on a host of exports […]
In the last 12 months, manufacturing employment has grown by 2.1 percent and construction employment by 4.1 percent, according to Bureau of Labor Statistics data—both positive indicators of future steel sales. Table 1 breaks total employment down into service and goods-producing industries and then into private and government employees. Most of the goods-producing employees work […]
It has been an incredibly long day as we went on two mill tours and taught a Steel 101 classroom session. As I write my final thoughts for this evening, we are on our way back to Memphis where we will muster our strength and head out to our Steel 101/Nucor cocktail party and dinner […]
With the Trump administration eliminating the Section 232 tariff exclusions for Canada, Mexico and the European Union, it is our opinion that the squeeze on supply coupled with higher prices due to the tariff will provide cover for the domestic steel mills to raise flat rolled and plate steel prices. SMU last moved our Price […]
Consumers in the United States may soon see their favorite products increase in price or become harder to find. In retaliation for Section 232 tariffs on U.S. steel and aluminum, Canada plans to impose its own 25 percent and 10 percent tariffs on a wide variety of goods. The 25 percent tariff is restricted to […]
Steel Market Update will be conducting our early June flat rolled and plate steel market analysis beginning at 8:30 a.m. ET on Monday. If you receive an invitation to participate, please take a few moments to open the email and answer the first question at the bottom of the message. That will take you to […]
Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following update on trade events in Washington: As briefly stated by the Trade Commissioner of the European Union, Cecilia Malmstrom, “Today is a bad day for world trade.” Malmstrom was referring to the announcement by President Trump that the 25 percent tariffs on steel […]
Commerce Secretary Wilbur Ross has made it official—there will be no tariff exemptions for Canada, Mexico, and the European Union. In a briefing on Thursday, Ross said the tariffs of 25 percent on imports of steel and 10 percent on imports of aluminum will go into effect at midnight. Argentina, Brazil, Australia and South Korea […]
The Trump administration’s announcement today that it would not spare its closest trading partners from the 25 percent tariff on steel imports surprised many in the market. Effective at midnight, steel from Canada, Mexico and the EU countries will be subject to the same penalty as exports from China and other so-called “bad actors.” Steel […]
The American Institute for International Steel, a trade group representing foreign steelmakers, said it is deeply disappointed the Trump administration has decided to impose tariffs on steel and aluminum imports from the EU, Canada, and Mexico. “Make no mistake: restricting the raw material supply in the U.S. and imposing tariffs on imports from our closest […]
It has been an incredibly busy day. The Trump administration was busy taking care of our “friends…” Canada, Mexico and the European Union are no longer excluded from the 232 tariffs. I got a note from a mill friend of mine who laid out the scenario as he saw it: “The irony of this whole […]
Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following update on trade issues in Washington, including China, NAFTA, and a new Section 232 investigation on automotive imports: • The White House reported that 25 percent tariffs on $50 billion worth of imports from China will be announced by June 15, and […]
The Canada Border Services Agency initiated an investigation on May 25 into the dumping and subsidizing of certain cold-rolled steels in coils or cut lengths from China, South Korea, and Vietnam. The investigation was prompted by a complaint from ArcelorMittal Dofasco. Cold rolled imports under the investigation increased from 85,075 metric tons in 2015 to […]
The Trump administration’s announced Section 232 investigation into imports of automobiles and auto parts is not sitting well with lawmakers or automotive industry analysts. Some lawmakers are calling the suggestion that automotive imports are a threat to national security an abuse of executive branch authority. Senate Finance Committee Chairman Orrin Hatch (R-UT) called the investigation […]
Welcome back to those who were off for the Memorial Day Holiday here in the United States. If you are extending your time off, well I’m jealous as we are back in the thick of it here at Steel Market Update. As expected, we didn’t see much movement between the flat rolled steel prices we […]
President Trump has ordered a Section 232 investigation to determine whether imports of automobiles threaten national security interests. The investigation comes on the heels of China’s announcement that it will drop tariffs on imported vehicles from 25 percent to 15 percent and tariffs on autoparts to 6 percent. The reductions are presumably positive for the […]
India is disputing the legality of Section 232 tariffs and quota arrangements by the United States, claiming violations of the GATT and Safeguards Agreement. India filed an official request with the World Trade Organization for dispute settlement consultations with the United States. India joins several other nations which dismiss the claim that imports of aluminum […]
The SMU Steel Summit Conference is steaming toward 550 registrations as we forge ahead to our goal of 800 attendees. We have 234 individual companies registered as of this morning. We did not break through the 500+ registration mark last year until the end of July. Some more interesting facts for those thinking of attending […]
Lewis Leibowitz, trade attorney and contributor to Steel Market Update, offers the following update on trade issues in Washington: Greetings from the West Coast. I just attended the National Association of Foreign Trade Zones Spring conference. Foreign trade zones have been targeted by the Trump administration in the tariff proclamations, including the Section 232 tariffs on steel […]
Marking a win for U.S. steelmakers, the Commerce Department on Monday officially slapped duties on corrosion-resistant steel (CORE) and certain cold rolled steel products imported from Vietnam that were produced from substrate originating in China. Commerce determined that even though the products underwent some processing in Vietnam, they should still be subject to the same […]
Metal manufacturers and users are calling the Section 232 product exclusion process “onerous” and “chaotic.” The Coalition of American Metal Manufacturers and Users expressed their concern about the tariff exclusion process in a letter to Secretary of Commerce Wilbur Ross on May 18. More than 8,200 exclusion requests have been filed with Commerce with no […]
I spent most of today canvassing the flat rolled and plate steel markets. A portion of the results of my inquiries can be found in our pricing article (indexes) and Tim Triplett’s article entitled, “SMU Q&A: No Signs of a Price ‘Breakout’ Either Way.” Many steel buyers are confused by the lack of clarity in […]