The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. indicates hot rolled coil price momentum continued its downward trend for the 16th week in a row. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements against the […]
I was advis ed today that Nucor had reduced their pricing on beams by $40 per ton in order to compete with foreign beam offers. The question then became what are the mills doing to blunt the impact of foreign steel offers of flat rolled products into the United States? As we reported on Tuesday, […]
For the past four days Steel Market Update (SMU) has been attending and speaking at the HARDI annual conference in San Antonio, Texas. One of the highlights of the conference were the presentations provided by Alan Beaulieu, one of the principal partners of the Institute for Trend Research (ITR) and the chief economist for HARDI. […]
Barge availability is still tight in the U.S. due to large cargo volumes of southbound grain, and northbound volumes of steel and salt, according to the Dec 4 MID-SHIP report. The US Department of Agriculture reports rates for southbound grain have dropped to 426 percent of tariff after reaching 800 percent or more in November. […]
Based on preliminary Chinese data, total steel exports from China were 9.7 million metric tons (10.7 million net tons) for the month of November, a 14 percent increase from the previous month and a 94 percent increase from November 2013 tonnage. This brings total 2014 exports to 83.6 million tons (92.2 million net tons). To […]
The Bureau of Labor Statistics (BLS) report on non-farm employment indicated that 321,000 jobs were added in November, October and September were revised up by a total of 44,000. The three month moving average (3MMA) of gains was the highest since May 2010 at 278,000. This job recovery is stronger than was the case in […]
Steel buyers in the November ISM Steel Buyers Survey are expecting general economic activity and sales and production to remain at current levels for the next six months. Eighty percent of buyers said general economic activity will remain the same while 90 percent expect the trend for sales and production in their industry to be […]
SMU Steel Buyers Sentiment Index came in at +52 this week. This is the same reading we got back in the middle of November 2014 The +52, which is within the optimistic range for our index, was 10 points less enthusiastic than what we measured at the beginning of November. One year ago our current […]
Steel Market Update (SMU) conducted our early December flat rolled steel market analysis this week. As part of the survey process, SMU asks those responding questions about flat rolled steel mill lead times. From their responses we create our average lead time for the industry by product. This allows us the ability to evaluate whether […]
Based strictly on the results from our Steel Market Update flat rolled market survey results, domestic steel mills are willing to negotiate prices on hot rolled, cold rolled, galvanized and Galvalume products. This is something that we see on a regular basis as lead times slip and the need for orders increases at the domestic […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. indicates hot rolled coil price momentum continued its downward trend for the 15th week in a row. MoMo, a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements against the […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. The Chicago Fed Mid-West Manufacturing Index which was suspended earlier this year was expected to be re-instituted this month but […]
It has now been five weeks (October 28th) since AK Steel became the first domestic steel mill to announce a price increase on flat rolled steel. The relatively modest $20 per ton move was, in many steel buyers’ opinions, meant to stem the decline in steel prices. At that point in time benchmark hot rolled […]
The Institute of Supply Management released their November report on December 2nd and after the October surprise on the upside, the index slid back slightly from 59.0 to 58.7. However, this is still the third best result of the year. Any number >50 indicates expansion and this was the eighteenth straight month for which this […]
Manufacturing expansion slowed around the globe in November. The JP Morgan Global Manufacturing PMI dropped to 51.8 indicating the slowest pace of growth in 15 months. New order growth posted a 16 month low as international trade languished. Commenting on the survey, David Hensley, Director of Global Economics Coordination at JPMorgan, said: “The global manufacturing […]
Steel Market Update (SMU) benchmark hot rolled coil pricing averaged $634 per ton ($31.70/cwt) for the month of November. CRU HRC averaged $635 per ton ($31.75/cwt) while Platts averaged $640 per ton ($32.00/cwt). Hot rolled prices at $630 per ton as of the last week of the month, were $5 per ton lower than where […]
The Chicago Business Barometer dropped 5.4 points to 60.8 in November, wiping out October’s sharp increase, and moving closer to September’s level of 60.5. Manufacturing growth continues but at a slower pace. New orders slid 11.7 points to 61.9 following a one year high in October. Overall, barring an unexpected December decline, orders should be […]
Durable goods orders in October rose by 0.4 percent from September to $243.8 billion but the three month moving average (3MMA) declined by 7.1 percent. The problem with the 3MMA was that the huge surge in July which was driven by civil aircraft fell out of the calculation. The October result is close to the […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. indicates hot rolled coil price momentum continued its downward trend for the 14th week in a row. MoMo, which is a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements […]
The consumer confidence index as reported by the Conference Board declined in November and the October results were revised downwards. The composite fell from 94.1 to 88.7, the view of the present situation declined from 94.4 to 91.3 as expectations fell from 93.8 to 87.0. The three month moving averages (3MMA) also declined. The 3MMA […]
Last week Steel Market Update (SMU) conducted our mid-November flat rolled steel market survey. We invited approximately 600 companies to participate representing manufacturing, steel service centers, trading companies, steel mills, toll processors and suppliers to the steel industry. Last week’s participation mix was very similar to what we see on a regular basis with 46 […]
This is part of a series of articles for those associated with the steel industry who are interested in steel sales or steel purchasing. Steel Market Update “Truth About Selling Steel” as well as our “Steel Buyers Basics” articles can be found on our website and are available to the public. Steel Market Update (SMU) […]
The Steel Market Update Price MoMo Index for flat rolled steel in the U.S. indicates hot rolled coil price momentum continued its downward trend for the 13th week in a row. MoMo, which is a trailing indicator, is measured as a percentage and shows the relation of the current hot rolled coil (HRC) price movements […]
Buyers and sellers of steel are beginning to feel the strain of reduced demand (whether seasonal or otherwise), stable to falling steel prices and a very competitive service center spot market which impacts distributors margins. The bottom line is those actively involved in the flat rolled steel industry in the United States and Canada are […]
Last year at this time hot rolled steel prices averaged $670 per ton and were close to the peak for the year which was $680 per ton (SMU index HRC average). Lead times peaked the first week in December on all flat rolled with the exception of Galvalume. From mid-December 2013 until the middle of […]
The vast majority of our SMU steel survey respondents reported the domestic steel mills as willing to negotiate flat rolled steel prices this week. Those reporting the mills as willing to negotiate hot rolled prices increase by 2 percent to 70 percent of the respondents. Cold rolled jumped by an even greater margin from 52 […]
Manufacturing activity in the Philadelphia area took a huge jump in November. The headline Index for the Philadelphia Manufacturing Business Outlook survey gained more than 20 points, rising from 20.7 in October to 40.8 in November. The surge is surprising given economists expected a drop in the index to 18.5. The dramatic upswing was met […]
Industrial production and manufacturing capacity utilization, both of these data points are reported in the Federal Reserve G17 data base. The IP Index was reported as 104.86 for October a decline of 0.11 percent from September. This is another example where the individual months result can be misleading. The three month moving average (3MMA) was […]
The latest Architecture Billings Index (ABI) slipped to 53.7 in October from 55.2 in September but shows continued strength in multi-family residential construction as well as growth for institutional construction projects. Demand for architectural design services was highest in the South and contracted sharply in the Northeast. The new projects inquiry index was 62.7, following a […]
The Metal Service Center Institute (MSCI) reported flat rolled steel inventories earlier this week. Steel Market Update then reviews the data and incorporates the information into a proprietary model which assists us in determining whether inventories are short (deficit) or long (excess) based on what our model is telling us. When September ended we were […]