The MNI Chicago Business Barometer was unchanged in August at 58.9 after a July plunge that ended five months of increases. Slight gains in production and orders were offset by declines in backlogs, employment and supplier deliveries. The inventory loss was significant, dropping the index 6.4 points to end in contraction and the lowest reading […]
“Hurricane Harvey was an incredibly expensive, economy-changing event. The impact will be staggering,” said economist Chris Kuehl of Armada Corporate Intelligence, speaking at Steel Market Update’s Steel Summit Conference this week in Atlanta. Perhaps 10 percent of Houston’s population could be permanently displaced, creating a future labor shortage. “Companies may not get those workers back,” […]
Consumer confidence increased again in August, according to The Conference Board. The composite value of consumer confidence in August was 122.9, up from 120.0 in July. The first estimate for July was revised down slightly. The last seven months have each been better than at any time since 2001. The three month moving average (3MMA) […]
U.S. manufacturing continued to perform well through July. This Premium content, which is being offered to all subscribers, summarizes seven data sources that describe the state of manufacturing in the U.S. We have reported on most of these separately in our Steel Market Update publications, therefore will be brief in this summary. We don’t expect […]
In June and July, China registered its highest share of global steel production ever, according to World Steel Association data with analysis by Steel Market Update. Global crude steel production in the month of July totaled 143,245,000 metric tons, up from 141,331,000 metric tons in June. Capacity utilization was 71.7 percent, down from 73.0 percent […]
Durable goods orders fell 6.8 percent in July, their largest margin since August 2014, as orders for volatile aircraft orders plummeted. Orders for civilian aircraft plunged 70.7 percent after a 129.3 percent surge in June. Transportation equipment orders in total dropped 19.0 percent. The drop in July was expected by economists after the strong gains […]
Michael Wagner, who took over as president of the North American Steel Alliance on May 1, hopes to build on the buying group’s 20 years of success. “It’s not broken; it doesn’t need to be fixed. I look at the next 20 years and how we can make it even more successful,” he said. Wagner […]
Researchers in Asia claim they have developed a new way to make steel that offers a high degree of strength without sacrificing ductility, creating a strong but formable material that could prove useful in the production of lighter, more fuel-efficient vehicles, among many other applications. Typically, making steel stronger decreases its formability. The Hong Kong-Beijing-Taiwan […]
Senior steel executives representing most of the nation’s flat rolled and long product manufacturers appealed directly to Donald Trump on Wednesday urging action on the Section 232 steel imports case. The letter from 25 steel and steel-related companies asked the president to take “broad and decisive action to ensure the ability of the domestic steel […]
This article is normally reserved for our Premium members, but we are sharing it with our entire readership this month. To learn more about what our Premium members receive, click here. Steel Market Update offers this update on the currencies of the steel and iron ore trading nations through Aug. 21. The analysis of currency […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel With world commodity indices jumping higher HR futures price action has been relatively muted. A modest $10 move higher in the latest […]
The first round of talks to upgrade the North American Free Trade Agreement concluded on Sunday, with officials from the U.S., Canada and Mexico pledging to continue negotiations at a rapid pace, possibly concluding by year’s end. President Trump inserted some added drama into the situation with comments at a campaign-style rally in Arizona on […]
Two Federal Reserve manufacturing indexes were released this week with both regions showing strong activity in August. Richmond manufacturing remained relatively steady in August, while Kansas activity rebounded from a weaker July. Fifth District (Federal Reserve Bank of Richmond) The composite manufacturing index in the Fifth District was unchanged in August at a solid reading […]
Manufacturers in the precision metalforming sector are not expecting much change in business conditions during the next three months, although orders are expected to trend slightly downward, according to the August 2017 Precision Metalforming Association (PMA) Business Conditions Report. Current average daily shipping levels dropped significantly in August with 28 percent reporting levels above those […]
Gross domestic product grew in every region except the Plains States in Q1 2017. The Bureau of Economic Analysis (BEA) introduced a new data set for GDP by state and region in 2014 and backdated it to Q1 2005. This week, the data was updated through Q1 2017. Even though we might consider this to […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Troy Rossi of Crunch Risk LLC. Here is how Troy saw trading over the past week: Steel This week, HR futures markets continued to see price consolidation along the curve as HR futures prices have found some support […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel import prices (delivered to USA ports) and domestic (USA) hot rolled coil prices (FOB Domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and […]
U.S. Trade Representative Robert Lighthizer offered a stern assessment of the United States’ goals for an updated trade agreement with Canada and Mexico as talks began Wednesday to renegotiate NAFTA. Canadian Foreign Affairs Minister Chrystia Freeland and Mexican Economy Minister Ildefonso Guajardo Villarreal joined Lighthizer in Washington for negotiations on the North American Free Trade […]
Steel shipments by Canadian service centers in July totaled 346,500 net tons, down 11.7 percent from the previous month, but up 8.7 percent from July 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 17,300 tons per day in July (a 20-day month), down from 17,800 tons per day […]
Manufacturing activity jumped sharply in New York State in August. The general business index of the Empire State Manufacturing Survey leapt 15.4 points to 25.2, its highest reading since September 2014. The new orders index rose seven points to 20.6 and shipments gained nearly two points for a reading of 12.4. Delivery times increased slightly, […]
The following steel mills are registered to attend this year’s SMU Steel Summit Conference at the end of this month: ArcelorMittal Mexico, ArcelorMittal Dofasco, ArcelorMittal/Nippon Sumitomo Calvert, Ternium USA, Ternium Mexico, NLMK USA, Nucor, Nucor Mexico, Nucor Canada, Kandil Steel (Egypt), California Steel Industries, AK Steel, CSN USA, North Star BlueScope, Steel Dynamics Inc., The […]
Like in the United States, steelmakers in the European Union are using their trade laws to fight back against steel imports that are unfairly subsidized by the governments in China and other countries. On Aug. 9, the European Union imposed provisional import duties of up to 28.5 percent on certain Chinese corrosion-resistant steels. The eight-month […]
The Trump administration’s effort to renegotiate the North American Free Trade Agreement and secure “a better deal for America” begins this week with talks between Canada, Mexico and the United States. The opening round will be in Washington on Aug. 16-20. The second round will take place in Mexico City around Sept. 10. Canada will […]
I was advised late on Friday afternoon that we should expect a Nucor price increase early next week. With scrap prices firming $10 to $30 per ton our expectation is for the increase to be $25-$30 per ton. Then the question will be will the industry support another increase after tepid (at best) support for […]
The following article on the hot rolled coil (HRC) futures markets was written by David Feldstein. As the Flack Global Metals Director of Risk Management, Dave is an active participant in the hot rolled futures market, and we believe he provides insightful commentary and trading ideas to our readers. Besides writing futures articles for Steel […]
Nucor Corporation announced today that it will acquire St. Louis Cold Drawn, Inc., a manufacturer of cold finished steel bar. The company’s cold drawn rounds, hexagons, squares, and special sections serve the U.S. and Mexican automotive and industrial markets and will add to Nucor’s value-added product portfolio. “This acquisition fits with our planned growth strategy […]
Steel Market Update received the following letter to the editor which was in response to comments made in a recent article by an un-named steel mill executive: I read your report “U.S. Steelmakers: We’re Not Protectionist” with interest, but also with a little bit of a smile. Since the mid-1960s, the U.S. steel industry has […]
On Monday, the futures markets surged 7 percent in China. We reached out to one of our trading contacts in China to see what we could learn about physical steel trading prices into the export markets out of China: Future’s market jumped 7% yesterday but only on Hot Money influx. Spot market was up RMB15 […]
China domestic demand is driving a tandem rise in iron ore and steel pricing. Iron ore prices are at their highest level since April as Chinese steel producers gobble ore to take advantage of high margins and surging summer steel prices. Although China is ahead of its target for reducing steel capacity this year, Chinese […]
In their pursuit of free and fair trade, U.S. steelmakers are often called protectionist—a label they increasingly resent. Steel industry trade groups, including the American Iron and Steel Institute and the Steel Manufacturers Association, have urged the Trump administration to take a harder stance on steel imports. Trade action, including new tariffs or quotas under […]