The U.S. Department of Commerce (DOC) released new import license data this evening. Steel Market Update has done a quick analysis of the data and foreign steel imports for the month of December are trending toward a 2.6 million net ton month (November license data was very similar at this time of the month yet […]
With mill order books extending into February on some products, most domestic steel producers have announced price increases. Steel Market Update sees steel prices moving higher for the next 30-60 days. The steel plate mills were the first to go last week, adding $50 per ton ($2.50/cwt) to the base price of plate steel. SSAB […]
Apparent steel supply for the month of October totaled 9,355,621 net tons, according to the latest data from the U.S. Department of Commerce and the American Iron and Steel Institute. Apparent steel supply is calculated by adding domestic steel shipments and finished U.S. steel imports, then subtracting total U.S. steel exports. October apparent steel supply […]
U.S. raw steel production for the week ending Dec. 9 totaled 1,672,000 net tons, a 4.0 percent increase from the same period last year, but down 2.8 percent from the prior week. The mill capability utilization rate for the week averaged 71.7 percent, down from 73.8 percent the prior week and 67.8 percent the prior […]
Demand for sheet products improved in the three months through October by 3.2 percent year over year, led by hot rolled and other metallic coated. Demand for Galvalume is surging at the expense of galvanized sheet, according to Steel Market Update’s latest analysis of American Iron and Steel Institute (AISI) and U.S. Department of Commerce […]
This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) about regional import volumes is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
Cleveland Cliffs has acquired 553 acres and the lease to 3,215 additional acres from Glacier Park Iron Ore Properties, LLC. The real estate includes mineral and surface leases in the Biwabik Iron Formation. The iron ore reserves are west of Nashwauk and were formerly leased by Essar Steel Minnesota, now called Mesabi Metallics. “We are […]
On the heels of its $50 per ton increase on carbon plate prices on Wednesday, Nucor announced an additional $30 per ton increase on hot rolled, cold rolled and galvanized steel products on Friday, effective immediately. U.S. Steel, NLMK USA and California Steel matched the Nucor sheet price increase of $30 per ton. ArcelorMittal USA, […]
Last week, Steel Market Update (SMU) conducted our early December 2018 flat rolled steel market trends survey. Invitations were sent to 640 people representing about 625 companies located in the United States and Canada. We invite manufacturing companies, service centers, steel mills, trading companies and toll processors/suppliers in the industry and ask them questions about […]
Flat rolled prices moved higher as the domestic mills announced yet another price increase this past week. There is now a large division between Platts and Steel Market Update (SMU) steel indexes as we prefer to wait a few days to let the dust settle after an increase has been announced. Benchmark hot rolled, prior […]
In separate notices to customers today, SSAB Americas, Nucor and ArcelorMittal USA announced their intentions to raise steel plate transaction prices by $50 per ton. This new announcement means the domestic plate producers have raised prices by $130 per ton ($6.50/cwt) over the past 30 days. SSAB Americas said it is raising transaction prices by […]
The following article on the hot rolled coil (HRC) futures markets was written by David Feldstein. As the Flack Global Metals Director of Risk Management, Dave is an active participant in the hot rolled futures market, and we believe he provides insightful commentary and trading ideas to our readers. Besides writing futures articles for Steel […]
With the exception of U.S. Steel, all of the domestic steel mills have announced new coating extras for galvanized steel. The coating extras, which were last changed in April/May 2017 (announcements went out in February/March 2017), are rising due to the higher costs associated with zinc, which is the main ingredient used when making galvanized […]
Final October imports were reported to be 3,148,243 net tons, according to U.S. Department of Commerce data released earlier this week. Total October imports were up 2.0 percent over September, and up 16.0 percent compared to levels one year ago. The Commerce Department also released license data this week that now suggests foreign steel imports […]
Rolled steel imports into the United States declined by 12.7 percent in the three-month period from September-November, compared with the prior three months, June-August. Sheet products declined by 11.4 percent on the same basis, according to weekly licensed import tonnages reported by of the U.S. Department of Commerce on Dec. 5. The data is reported […]
Flat rolled steel prices are firming and heading higher. SMU found hot rolled prices over the past week remaining the same as the week before. All of the other flat rolled products saw their averages move higher. Here is how we see prices this week: Hot Rolled Coil: SMU price range is $590-$640 per ton […]
Galvanized steel prices are on the way up for customers of Steel Dynamics, which was the latest mill to announce an increase in its coating extras due to the high price of zinc, which traded at nearly $1.43 per pound yesterday. SDI’s new extras schedule is effective on orders acknowledged for delivery beginning Jan. 1. […]
U.S. steelmakers have imported 7.19 million short tons of semi-finished steel so far this year, an increase of 9.1 percent over 2016, according to government data on October preliminary imports and November licenses as of Nov. 27 (Figure 1). Semi-finished steel includes slabs, blooms and billets, which mills hot roll into coils and other products. […]
U.S. raw steel production for the week ending Dec. 2 totaled 1,720,000 net tons, a 7.8 percent increase from the same period last year, and up 1.0 percent from the prior week. The mill capability utilization rate for the week averaged 73.8 percent, up from 73.0 percent the prior week and 67.3 percent the prior […]
We had yet another week of “mixed” spot pricing in flat rolled and plate products, according to the Steel Market Update (SMU), Platts and SteelBenchmarker steel price indexes. Benchmark hot rolled was down for the week, according to the SMU and Platts steel price indexes. SMU saw the HRC price average as $615 per ton, […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel import prices (delivered to USA ports) and domestic (USA) hot rolled coil prices (FOB Domestic mills). We want our readers to be aware that this is only a “theoretical” calculation as freight costs, trader margin and […]
Except for a few flat rolled steel mills that have not yet completely filled their December order books, most steel producers are holding firm on steel pricing in anticipation of good demand in the first quarter. The result is we are seeing two distinct pricing markets – those who have December tons and are willing […]
Imports of foreign steel will be much lower in November than at any time since April 2016. Based on the most recent license data released on Tuesday, Nov. 28, imports will be approximately 2.6 million tons. This is down from 3.1 million tons in October and is also less than the 2.8 million tons imported […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel HR futures markets have paused post Thanksgiving. While the HR spot prices have retraced $27/ST in the month of November to approximately […]
Raw material markets have been tranquil since our October update, but the value of the U.S. dollar is once again in decline. In this report, we examine the latest prices for iron ore, scrap, coking coal and zinc. To put the raw materials analysis into perspective, we begin with Figure 1, which shows the spread […]
We launched an updated version of our website over the weekend. Since then, we have been working diligently to fix the last remaining kinks in the system. The goal of this update is to make all news, blog posts, and other content much easier to read on a mobile device and tablet. We also upgraded […]
Steel Market Update canvassed a large number of flat rolled and plate steel buyers during the course of the last 24 hours. The goal was to better understand where spot prices were being offered (and by whom) and if there were any differences in momentum or the negotiation positions of the various steel mills. We […]
Steel Market Update (SMU) has been canvassing our ferrous scrap sources to find out where the industry sees prices once the negotiations begin with the domestic steel mills. All of our sources tell SMU they expect prices to be higher, somewhere in the $10 to $30 per gross ton range, compared to the November prices. […]
U.S. raw steel production for the week ending Nov. 25 totaled 1,703,000 net tons, a 7.0 percent increase from the same period last year, but down 2.4 percent from the prior week. The mill capability utilization rate for the week averaged 73.0 percent, down from 74.9 percent the prior week but up from 67.1 percent […]
Since Nov. 20, 2017, two of the West Coast flat rolled mills have increased prices. On Monday, UPI (USS/POSCO) followed the lead of California Steel Industries (CSI) by raising prices. In a letter to customers, they advised that prices of hot rolled pickled & oiled (HRPO), cold rolled and galvanized would increase by $30 per […]