Worthington Industries’ plan to split into two separate companies by early 2024 is full-steam ahead, and the man getting ready to helm the ship of the new Worthington Steel is Geoff Gilmore. Gilmore joined Worthington in 1998, and has served as EVP and COO since August 2018. He will be the CEO of Worthington Steel, […]
U.S. Steel aims to increase base prices on spot orders of flat-rolled steel by at least $50 per ton ($2.50 per cwt.) The move is effective immediately and applies to “all open quotations and/or negotiations where an agreement is yet to be concluded,” the Pittsburgh-based steelmaker said in a letter to it sales executives on […]
Editor’s note: Steel Market Update is pleased to share this Premium content with Executive members. For information on how to upgrade to a Premium-level subscription, contact Lindsey Fox at lindsey@steelmarketupdate.com. US light-vehicle (LV) sales rose to an unadjusted 1.36 million units in May, up 22.9% vs. year-ago levels, the US Bureau of Economic Analysis (BEA) […]
The Congressional Steel Caucus held a hearing on The State of the Steel Industry in Washington on Wednesday, June 7, where prominent steel executives and the United Steelworkers (USW) union gave testimony on issues such as international trade and sustainability. In his opening remarks, US Rep. Frank Mrvan (D.-Ind.), vice-chairman of the Caucus, stressed his […]
The LME aluminum three-month price is moving higher again as the week ending June 9 closes trading at $2,230/t. Failing to dip below the critical transition price of $2,000/t, The LME steadied itself despite very lackluster demand anywhere in the world. Trading in China also kept the regional exchange there neutral, if not a bit […]
Go figure, in the last month, HR spot has continued to decline. The index tied to CME HR futures has given up $140/ST ($1,130/ST to $990/ST). A look at the fundamentals would appear to support the latest market direction. The list includes declining steelmaking component prices (zinc, coking coal, iron ore and scrap), a sharply […]
Steel Market Update’s latest survey shows movements in lead times were varied across products this week, with hot rolled falling below the 5-week mark for the first time since early February. The average lead times for hot-rolled, cold-rolled, and galvanized sheet all fell back slightly from our market check two weeks ago, while those for […]
General Motors will soon be sourcing low-carbon steel from ArcelorMittal North America. The steelmaker said it will provide the Detroit-based automaker with its XCarb™ recycled and renewably produced (RRP) steel made at its ArcelorMittal Dofasco plant in Hamilton, Ontario. Shipments are anticipated to begin in the current quarter, ArcelorMittal said in a statement. Made via […]
I wanted a fresh perspective on the steel market this week, so I turned to a new voice – namely, ChatGPT. I won’t weigh in on whether the AI-driven chatbot is a useful tool, an extinction-level threat, or just another shiny object. That said, ChatGPT has been available publicly since Nov. 30, 2022. And it […]
The LME aluminum three-month price continued to make steady gains on the morning of June 2 and was seen trading at $2,308/t. The move marks the successful test of the key $2,200/t support earlier last week. SHFE aluminum prices also traded higher on that day. The cash price settled at RMB18,585/t and last traded at RMB18,665/t, […]
The US economy added 339,000 new jobs in May, according to data from the US Department of Labor. The labor market again outperformed economists’ consensus expectations with another show of resilience, and beating April’s total of 253,000. May’s job growth came despite the Federal Reserve’s aggressive efforts to cool the economy to slow the labor […]
US light-vehicle (LV) sales rose to an unadjusted 1.35 million units in April, the US Bureau of Economic Analysis (BEA) reported. The month-on-month (MoM) boost pushed April’s total 9% higher year-on-year (YoY), and is the eighth consecutive month to see a YoY increase in sales. On an annualized basis, LV sales were up 7.2% MoM in April, […]
Sheet prices were broadly flat this week mostly because of a dearth of activity around Memorial Day. The consensus is prices will resume their downward trajectory, especially with nearly everyone we surveyed reporting that mills remain willing to negotiate lower spot prices. So where and when might prices bottom? For starters, very few people think […]
Trade organizations along the electrical steel value chain are urging President Biden to increase domestic production of the products. Groups represented in a May 22 letter sent to the president included the Alliance for Automotive Innovation, American Public Power Association, Edison Electric Institute, GridWise Alliance, International Brotherhood of Electrical Workers, Leading Builders of America, National Association of […]
North American auto assemblies declined by 15.5% in April, edging down for the first time year-to-date, and for the first time since last November. Last month’s assemblies, however, were still 7.8% higher year-on-year (YoY), according to LMC Automotive data. While supply levels began to rebound in the second half of last year, inventories fell modestly in […]
Forza Steel is investing $60 million to build a manufacturing facility at the Port of Brownsville in Texas on the Mexican border. The Mexican carbon steel pipe producer is planning to install equipment in early July to begin rolling mill operations, according to a press release from the Port of Brownsville on May 2. The facility […]
SMU’s domestic hot-rolled coil price has fallen below $1,000 per ton ($50 per cwt) for the first time since early March as a broad-based sheet price decline picks up speed. Our HRC price now stands at $990 per ton on average, down $50 per ton from $1,040 per ton last week and off $170 per […]
April was a strong month for sales of light vehicles in the US, with monthly sales pushing the seasonally adjusted annual rate to 15.9 million, according to figures from the Bureau of Economy Analysis (BEA). Light-vehicle sales totaled 1.347 million units in April, according to the BEA. This was a 1.5% decline from the month […]
United Auto Workers (UAW) members at a Constellium plant in Michigan are on strike after failing to reach a labor agreement with the aluminum products producer. 160 members of UAW Local 174 at Constellium’s automotive structures plant in Van Buren, Mich., opted to strike as of May 17 “after weeks of the company refusing to […]
Lethbridge, Alberta-based Varsteel Ltd. has acquired Canadian tube manufacturer Atlantic Tube & Steel. “The Varsteel team is excited to join forces with Atlantic Tube & Steel Inc., broadening our company platform and delivering more value to our customers through additional products and steel services,” Gerald Varzari, Varsteel president and CEO, said in a statement on […]
Lourenco Goncalves, Cleveland-Cliffs’ chairman, president, and CEO—as well as the newly elected AISI chairman—and Kevin Dempsey, AISI president and CEO, discussed issues ranging from Section 232 tariffs and hydrogen in steelmaking, to steel imports from Mexico, along with a host of other topics on Tuesday at the American Iron and Steel Institute (AISI) General Meeting press […]
Private equity firm Apollo has been looking to add Arconic to its portfolio for some time. Almost since its spin-off from its upstream parent, Alcoa, in 2016, Arconic’s assets and key position in the aluminum semis value chain have been on Apollo’s radar. The deal is expected to close before the end of 2023, at […]
A much-anticipated bleeding in US flat-rolled steel prices has begun. On the hot-rolled coil side, we’ve been losing approximately $20-25 per ton per week since mid-April. That’s a boo-boo. Steel might need a Band-Aid. Does it become a wound that needs a tourniquet? I ask that question because the high end of our HRC price […]
The 21st century has shown technology transforming the auto industry. From hybrids to pure electric vehicles, even to hydrogen, popping the hood these days can be more microchip than sparkplug. Beyond that, there’s the interplay with AI. Think self-driving cars. One thing our current technology can’t do, though, (yet) is build the cars itself. That […]
Premiums for aluminum in the US took fell again last week following a period of stability after the Federal Reserve stepped in the wake of the closure of Silicon Valley Bank (SVB). Economic struggles have continued to depress shipment volumes into Q2, and many major macro data points are still muddied. Last week another bank […]
Cleveland-Cliffs said Friday its employees represented by the International Association of Machinists and Aerospace Workers (IAM) Local 1943 at its Middletown Works in Ohio have ratified a new four-year labor agreement. The Cleveland-based steelmaker said the agreement is effective on May 15, and covers approximately 2,100 hourly employees. A tentative labor deal was reached in […]
First, the important stuff: May the fourth be with you! Second, steel market participants tell us that several domestic mills have become significantly more aggressive on prices of late. I’m not sure of a Star Wars analogy for that. Prices being slashed with light sabers? I’m open to suggestions. Let’s say it takes tens of […]
SMU polled steel buyers on a variety of subjects on Monday and Tuesday of this week, including current and future steel prices, inventory strategies, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing some of them in each buyer’s own words. We want to hear your thoughts, too! […]
The US economy might be at the beginning of what looks to be a challenging second half, according to Reibus International CEO and founder John Armstrong. He sat down with SMU managing editor Michael Cowden for a Community Chat to discuss the economic outlook, its impact on Reibus, and the company’s long-term goals around digitizing how steel is […]
Our hot-rolled coil price slipped modestly again this week. That wasn’t a surprise given the trends we’ve outlined in our newsletters over the last few weeks – shorter lead times, increased domestic output, and mills more willing to negotiate lower prices. Declines often aren’t modest for long. Could we see bigger drops in two weeks […]