National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines other metallic coated imports (mainly Galvalume) by region through September 2020. In September, OMC imports were up by 0.9 percent at the […]
The Perfect Storm: Long lead times, late deliveries, low service center inventories, strong demand, higher prices, lack of foreign steel imports, mill outages both planned and unplanned, maximum capacity utilization rates at a number of mills, NLMK USA strike, higher ferrous scrap prices that are expected to go much higher in the coming months, restrictions […]
Steel Market Update’s check of the market this week shows that the flat rolled mills are extremely busy and operating near full capacity. More than 80 percent of the service center and OEM executives responding to SMU’s questionnaire said they are seeing late deliveries from their mill suppliers. More than 60 percent expect a shortage […]
The SMU Steel Price Momentum Indicators on all flat rolled and plate steel products are currently pointing toward higher prices over the next 30 days. We expect hot rolled, cold rolled, galvanized, Galvalume and steel plate pricing to increase during the coming weeks. The two major reasons for our position are the limitations of supply […]
Flat rolled steel prices continued to rise last week, though at a modest $5-10 per ton pace. The exception was Galvalume, which jumped by $40 as demand continues to outpace supplies. The benchmark average for hot rolled coil, at $710 per ton, surpassed the $700 level, where many had expected it to peak. With demand […]
Among steelmaking raw materials, the prices of pig iron, scrap, zinc and aluminum have seen big gains in the past three months. Pig iron and scrap prices have seen significant increases compared to the late summer months. Iron ore and coking coal prices had widened through mid-September but have since declined, with coking coal prices […]
I am hearing negotiations on 2021 flat rolled contracts are quite contentious. OEM buyers are telling me the domestic mills are so aggressive with their pricing offers that buyers are having to look for alternative suppliers. As one manufacturing buyer put it to me yesterday, “[The steel mills are] effectively asking us to review other […]
Growing up I was a bit of a history nerd and my original intention was to be a political science major when I entered Hamline University where I went to college. Over time I morphed into a bit of a political nerd, so elections are exciting times for me. They may not be for many […]
Steel Market Update’s check of the market this week puts the average price for hot rolled steel at $700 per ton, a psychological milestone for the steel sector as the economy continues to make progress from the severe early effects of the COVID pandemic. This marks the 12th week in a row that flat rolled […]
Lead times for spot orders of steel continue to extend with hot rolled delivery now averaging more than six and a half weeks and coated steel orders around eight and a half weeks. Lead times are an indicator of steel demand—longer lead times mean the mills have more orders to process and are less likely […]
Signaling that the mills remain busy, lead times for delivery of spot orders continue to lengthen with hot rolled now averaging more than six and a half weeks and coated steel orders around nine weeks. Lead times are an indicator of steel demand—longer lead times mean the mills have more orders to process and are […]
Mills continue to control negotiations over hot rolled, cold rolled and coated steel orders as they seek to collect higher prices in a market characterized by extended lead times and tight supplies. About 86 percent of the hot rolled steel buyers responding to Steel Market Update’s market trends questionnaire this week said the mills are […]
Mills continue to hold the upper hand in negotiations over hot rolled, cold rolled and coated steel orders as they work to collect higher prices in a tight market with extended lead times. Buyers report the mills will only negotiate on big tonnages to be delivered in 2021. About 86 percent of the steel buyers […]
Flat rolled steel prices increased by another $10-20 per ton in the past week as demand continues to outpace the tight supplies, lead times remain extended and there’s limited competition from imports. Only about one-quarter of the steel buyers polled this week believe prices are near a peak. So, with scrap prices expected to move […]
COVID-19 cases appear to be surging again, and we asked steel buyers to advise if they were seeing any changes to their business due to the new cases. Most reported no impact from the virus, but there were concerns about what government might do if cases continue to rise. No one wants another shutdown of […]
Steel prices are showing some strength in the fourth quarter as mill lead times remain extended, competition from imports is minimal, inventories are near record lows and demand is maintaining momentum as the economy slowly recovers from COVID. Supplies remain tight as a strike, unplanned outages and planned maintenance are keeping mill capacity below normal […]
Lead times for hot rolled steel now average longer than six weeks, and coated steel orders longer than eight weeks, as the mills remain busy in a market adjusting to business in a pandemic. Lead times are an indicator of steel demand—longer lead times indicate the mills have more orders to process and are less […]
The benchmark price for hot rolled remained unchanged at around $650 per ton, according to Steel Market Update’s check of the market this week, even as the mills worked to collect the price increases announced earlier in the month. Other flat rolled products saw a modest increase. Begging the question: Is the upward price momentum […]
Nucor Tubular Products led the pipe and tube manufacturers announcing a $50 per ton price increase this morning on HSS, pipe, mechanical and piling products. EXLTUBE advised they were following the Nucor lead and announced their fourth price increase on HSS and A53B products matching the Nucor $50 per ton. New orders for foreign steel […]
The following report was done by David Schollaert, the new analyst at Steel Market Update. He was asked to take a look at past market trends and to lay out scenarios for future trends. Obviously, there are black swan events (such as the Section 232 tariffs) which can push a market in one direction much […]
Flat rolled steel prices saw a big jump this week nearly equivalent to the $50 per ton increase announced by the mills last week. Steel Market Update’s latest check of the market puts the current benchmark price for hot rolled at $650 per ton. The mills also announced price increases on plate last week, with […]
Lead times for spot orders of hot rolled and Galvalume steels continued to lengthen a bit over the past two weeks, while lead times for cold rolled, galvanized and plate products were flat to slightly lower. Lead times for hot rolled now average more than five and a half weeks, cold rolled more than seven […]
It’s a seller’s market as the mills hold firm in price talks on hot rolled, cold rolled and coated steel orders, while they seek to collect the higher prices announced this week in an improving market, according to respondents to Steel Market Update’s market trends questionnaire. About 77 percent of the hot rolled steel buyers […]
Mills continue to stand firm in price talks on hot rolled, cold rolled and coated steel orders as they seek to collect the $40-50 price increases they announced two weeks ago, report respondents to Steel Market Update’s market trends questionnaire. Based on SMU’s latest check of the market, the benchmark price for hot rolled steel […]
Looking at the month-on-month changes in steelmaking raw materials costs, the prices of iron ore, pig iron and zinc have continued to experience noticeable gains, a pattern seen since the beginning of Q3 2020. As expected, scrap prices have bounced back after the downturn seen in the summer months, providing support to higher finished steel […]
Steel prices continue to see some upward momentum as flat rolled and plate prices rose by another $5-15 per ton, according to Steel Market Update’s check of the market this week. The mills announced further $40-50 price hikes on plate on Monday and Tuesday in hopes of sustaining that momentum. Here is how we see […]
From one of our SMU readers to John Packard, President & CEO of Steel Market Update, “Welcome back… Regarding steel, wow. What a difference a month (or, a month and half) makes!” A second reader told us, “Market pricing and lead-times have moved aggressively…and rapidly. Many are finding themselves too late to the party.” It […]
Flat rolled steel prices continue to rise as demand improves, lead times extend and supplies remain a bit tight. Prices rose a further $10-40 per ton, based on Steel Market Update’s check of the market this week, with hot rolled reaching the psychological high mark of $600 per ton. SMU’s price momentum indicators remain pointed […]
Flat rolled steel prices continue to rise as demand improves, lead times extend and supplies remain a bit tight. Prices rose a further $10-40 per ton, based on Steel Market Update’s check of the market this week, with hot rolled reaching the psychological high mark of $600 per ton. SMU’s price momentum indicators remain pointed […]
I am back. One of the questions I got on this morning’s HARDI steel conference call was if I really did go off the grid and not stay in touch with the market over the 24 days that I was away from my office? The answer was I rented a cottage about as far off […]