The following article is another example of Premium level content that is not normally seen by our Executive level members. If you would like to learn more about upgrading your membership from Executive to Premium please contact our office: info@SteelMarketUpdate.com or by phone: 800-432-3475. This report compares domestic mill shipments and total supply to the […]
ArcelorMittal reported a $700 million loss for third quarter which it blamed on falling prices and dumping of steel by China. Third quarter EBITDA was $1.35 billion. “Operating conditions have deteriorated in recent months, both in terms of the international steel price environment which has been driven by unsustainably low export prices from China and […]
License data for October was updated on November 3rd through the Steel Import Monitoring System of the US Commerce Department. At SMU we perform a detailed analysis of this data, an explanation of our methodology is given at the end of this write up. Total rolled product licensed imports in the single month of October were […]
The Institute of Supply Management released their October report on November 2nd. An explanation of the ISM index is given at the end of this piece. After seven straight months of decline the three month moving average (3MMA) of the index had positive growth on a month over month basis in June and July but […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
The following is the Chicago Federal Reserve statement followed by our own graphical analysis. The CFNAI is an excellent reality check for much of the economic analysis that we routinely provide in The Steel Market Update and is also a reasonably good predictor of steel demand with a six to nine month lead. For example […]
“The UK steel industry is struggling for survival in the face of extremely challenging market conditions.” That’s how Tata Europe CEO Karl Koehler summed up the condition of the industry that is facing an onslaught of cheap steel imports, particularly from China, high energy costs and a weak export market due to a strong British […]
The difference between auto industry and steel industry: the UAW has issue a notice to GM that they could walk out at midnight tonight (Sunday) if they don’t have a contract. The USW is content to work under the old contract for as long as they can get away with it since both US Steel […]
Based on Steel Market Update (SMU) analysis of the recently released MSCI service center inventory and shipment data, total service center carbon steel shipments decreased by 55,000 tons in September to 3.105 million tons. Shipping days at 21, were unchanged from August. On a tons per day basis (t/d) shipments decreased from 150,500 tons in […]
This report compares domestic mill shipments and total supply to the market. It quantifies market direction by product and enables a side by side comparison showing the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both […]
Licensed data for September was updated on October 6th through the Steel Import Monitoring System of the US Commerce Department. The SMU publishes several import reports ranging from this very early look using licensed data to the very detailed analysis of final volumes by district of entry and source nation which is available to our […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
The U.S. Department of Commerce released August Preliminary Census Data showing August imports as being 3,016,157 net tons (2.7 million metric tons). August imports are down 200,000 tons compared to July and were below both the 3 month and 12 month moving averages. When looking at flat rolled items we found a small reduction in […]
The following is the Chicago Federal Reserve statement followed by our own graphical analysis. The CFNAI is an excellent reality check for much of the economic analysis that we routinely provide in The Steel Market Update and is also a reasonably good predictor of steel demand with a six to nine month lead. For example […]
Based on Steel Market Update (SMU) analysis of the recently released MSCI service center inventory and shipment data, total service center carbon steel shipments decreased by 126,600 tons in August to 3.160 million tons. Shipping days at 21, were down one from July. On a tons per day basis (t/d) shipments increased from 149,400 tons […]
This report compares domestic mill shipments and total supply to the market. It quantifies market direction by product and enables a side by side comparison showing the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both […]
This data is normally reserved for our Premium members, but we wanted to give our Executive readers a view of what a Premium subscription includes. This is one of many additional data points available to our Premium level members. Licensed data for August was updated on September 4th through the Steel Import Monitoring System of […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
The following is the Chicago Federal Reserve statement followed by our own graphical analysis. The CFNAI is an excellent reality check for much of the economic analysis that we routinely provide in The Steel Market Update and is also a reasonably good predictor of steel demand with a six to nine month lead. For example […]
Based on Steel Market Update (SMU) analysis of the recently released MSCI service center inventory and shipment data, total service center carbon steel shipments decreased by 116,500 tons in July to 3.287 million tons. Shipping days at 22, were the same as June. On a tons per day basis (t/d) shipments decreased from 154,700 in […]
According to the latest data released from the US Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of June 2015 was 9,373,498 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. June supply […]
This report compares domestic mill shipments and total supply to the market. It quantifies market direction by product and enables a side by side comparison showing the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both […]
Licensed data for July was updated on August 4th through the Steel Import Monitoring System of the US Commerce Department. Steel Market Update publishes several import reports ranging from this very early look using licensed data to the very detailed analysis of final volumes by district of entry and source nation which is available to […]
ArcelorMittal reported second quarter EBITDA of $1.4 billion and net income of $179 million. Results for the company were impacted by improved steel and mining volumes that were offset by lower price. Steel shipments totaled 22.1 million tons, up 3.4 percent year over year. Quarter sales fell 18 percent to $16.9 billion compared to $20.7 […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]
The following is the Chicago Federal Reserve statement followed by our own graphical analysis. The CFNAI is an excellent reality check for much of the economic analysis that we routinely provide in at Steel Market Update and is also a reasonably good predictor of steel demand with a six to nine month lead. For example […]
There seems to be more inaccurate analysis published on this subject than on any other that we track at Steel Market Update. For example on Saturday AMM reported that, “US steel service center shipments improved in June compared with the previous month ——-.” At a superficial level this statement is correct, but as an analysis […]
This report compares domestic mill shipments and total supply to the market. It quantifies market direction by product and enables a side by side comparison showing the degree to which imports have absorbed demand. Sources are the American Iron and Steel Institute and the Department of Commerce with analysis by SMU. Table 1 shows both […]
According to the latest data released from the US Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of May 2015 was 9,069,541 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. May supply […]
An explanation of the Key Indicators concept is given at the end of this piece for those readers who are unfamiliar with it. The total number of indicators considered in this analysis is currently 36. Please refer to Table 1 for the view of the present situation and the quantitative measure of trends. Readers should […]