China recently became the world’s largest exporter of cars. Experience from the steel industry suggests this is not a trend that will reverse, though it might reduce. Changes in auto supply chains and metals demand outside China are likely. China Is Now the World’s Largest Car Exporter China recently became the world’s largest exporter of […]
Most metal formers predict business conditions will remain stable over the next three months, according to the July 2023 Precision Metalforming Association (PMA) Business Conditions Report.
Most metal formers predict business conditions will remain stable over the next three months, according to the July 2023 Precision Metalforming Association (PMA) Business Conditions Report. PMA’s July report said that 55% of the metal-forming companies the association surveyed expect no change in general economic activity in the next three months vs. 58% in June. Thirty-four […]
The US HRC Futures market has been on a roller coaster ride since our last update (green). In early July, the front month futures contracts surged significantly as news of Steel Dynamics Inc.’s (SDI’s) Sinton, Texas, mill outage trickled through the market (blue). However, the futures quickly reversed course and experienced a sharp decline, following […]
Reliance Steel & Aluminum Co. posted second quarter results consistent with the previous quarter’s, even as shipments slipped. The Scottsdale, Ariz.-based service center behemoth shipped 1.484 million tons in Q2, 1.2 million of which were carbon steel products. Overall shipments were down 2.4% sequentially, with carbon shipments declining 2.1%. Compared to the same quarter last […]
Reliance Steel & Aluminum Co. posted second quarter results consistent with the previous quarter’s, even as shipments slipped.
Schnitzer Steel Industries has changed its corporate name to Radius Recycling. The Portland, Ore.-based scrap recycler and long steel producer said on Wednesday it’s part of a rebranding initiative to reflect the company’s “vision, purpose, and impact on the global economy.” “While metals recycling and steel manufacturing have been the foundation of our global business for […]
Schnitzer Steel Industries has changed its corporate name to Radius Recycling.
A stable market and steady lead times have led to decent demand, but companies are still keeping a close eye on where the market is headed, according HARDI members.
A stable market and steady lead times have led to decent demand, but companies are still keeping a close eye on where the market is headed, according to members of the Heating, Air-Conditioning & Refrigeration Distributors International (HARDI) speaking on the July 25 meeting of its Sheet Metal/Air Handling Council. During June’s meeting, 36% of […]
Over the last month, the iron ore price has shown more weakness as fewer participants in the market maintain a positive outlook based on more stimulus measures in China. Simultaneously, on the supply side, Australia followed seasonal trends with a marginal y/y increase. Recovered Brazilian volumes have also begun to weigh on the market. Supply […]
Over the last month, the iron ore price has shown more weakness as fewer participants in the market maintain a positive outlook based on more stimulus measures in China. Simultaneously, on the supply side, Australia followed seasonal trends with a marginal y/y increase. Recovered Brazilian volumes have also begun to weigh on the market. Supply […]
In the past two months, the US Midwest Hot Rolled Coil (HRC) futures market has experienced significant fluctuations. The initial decline in prices led to destocking and low inventory levels. However, recent price increase announcements by mills halted the downward trend and even reversed it temporarily. The futures curve reflected short-term optimism but indicated that the […]
In the past two months, the US Midwest Hot Rolled Coil (HRC) futures market has experienced significant fluctuations. The initial decline in prices led to destocking and low inventory levels. However, recent price increase announcements by mills halted the downward trend and even reversed it temporarily.
We've reached approximately 1,100 registrations for SMU's 2023 Steel Summit Conference, which is only 31 days away. There's still plenty of time to register, just click here.
Steel Dynamics Inc. (SDI) posted lower year-over-year second quarter profits but said demand “remains solid” across the automotive, construction, industrial, and energy sectors. The Fort Wayne, Ind.-based steelmaker also predicted that steel prices might find support thanks to what it described as low customer inventories. “We remain confident that market conditions are in place for […]
Editor’s note: Steel Market Update is pleased to share this Premium content with Executive members. For information on how to upgrade to a Premium-level subscription, contact Lindsey Fox at lindsey@steelmarketupdate.com. Flat Rolled = 52.3 Shipping Days of Supply Plate = 58.1 Shipping Days of Supply Flat Rolled US service center flat-rolled steel supply edged up slightly in […]
US heating and cooling equipment shipments recovered in May, according to the most recent data released from the Air Conditioning, Heating, and Refrigeration Institute (AHRI). The total amount of units shipped for the month of May was 1.98 million, compared to 1.74 million units in April. Shipments were up 13% month-over-month (MoM), but down 6% year-over-year (YoY). […]
The US Federal Reserve said that overall economic activity has inched up since May in its latest Beige Book Report released on July 12. The Beige Book is a compilation of information on current economic conditions, gathered by each district Federal Reserve Bank, and is published eight times per year. The newest report by the Fed on the state […]
US service center flat-rolled steel supply edged up slightly in June as daily shipments dropped to the lowest rate this year.
Commercial Metals Co. (CMC) has secured a permit giving it the go-ahead to begin construction of its new micro mill in West Virginia. The Irving, Texas-based longs and scrap producer said on July18 the West Virginia Department of Environmental Protection granted it the permit, allowing for the commencement of construction of its “fourth technologically advanced micro […]
The US Federal Reserve said that overall economic activity has inched up since May in its latest Beige Book Report released on July 12. The Beige Book is a compilation of information on current economic conditions, gathered by each district Federal Reserve Bank, and is published eight times per year. The newest report by the Fed on the state […]
Commercial Metals Co. (CMC) has secured a permit giving it the go-ahead to begin construction of its new micro mill in West Virginia.
Manufacturing activity in New York state has stayed relatively level in July compared with the previous month, according to the most recent Empire State Manufacturing Survey. The headline manufacturing general business conditions fell six points to 1.1 in July month-on-month, according to survey results collected between July 3 and July 11 by the Federal Reserve Bank […]
With demand trending lower throughout out the first half of 2023, the aluminum industry is searching for something to be optimistic about. Recent economic news is leaning positive, with inflation slowing across multiple measures including the Producer Price Index (PPI) and manufacturing final goods’ pricing. Personal consumption expenditure has slowed from its peak but sustained […]
AZZ Inc. reported an 18% increase in net income in its fiscal first quarter of 2024, driven by a strong performance in its Metal Coatings business and by a full quarter with its Precoat Metals acquisition. The Fort Worth, Texas-based galvanizer and coil coater posted net income of $28.5 million in its fiscal Q1 ended […]
U.S. Steel has announced environmental product declarations (EPDs) across three flat-rolled steel coil products melted at its Big River Steel Works in Osceola, Ark. The Pittsburgh-based steelmaker said Friday the offerings include hot-rolled, cold-rolled, and corrosion-resistant flat-rolled products from Big River Steel. “The EPDs provide quantifiable, independent, and audited environmental data on these core products,” […]
The LME aluminum 3-month price is moving down again after the 4th of July holiday and was last trading near $2,130 per metric ton (as of the writing of this article on July 7). The fact that the price resumed sharp declines and is not challenging the next resistance at $2,200 per metric ton shows […]
A short week with the July 4th Holiday kind of sums up recent HR futures activity. Subdued spot activity and not much change from the previous weeks’ indexes leaves the market time to roll exposures. The recent price increases appear to have given spot prices a pause. Heading into the cyclical summer soft spot, mills are […]
Ternium and Tenaris have upped their stake in Brazilian steelmaker Usinas Siderúrgicas de Minas Gerais S.A. (Usiminas). Ternium’s Brazilian subsidiary Confab Industrial S.A., Ternium Investments, and Ternium Argentina, collectively known as the T/T group within the controlling group of Usiminas, closed on a previously announced acquisition of 68.7 million ordinary shares of Usiminas. The shares […]