Flat rolled steel prices declined by another $60-100 per ton in the past week, pushing the benchmark hot rolled price down to $1,235 per ton. That’s a decline of about 37% or a total of $720 per ton since the market peaked five months ago. Why the sharp decline? An imbalance between supply and demand […]
Steel buyers remain a surprisingly bullish bunch despite rapidly declining steel prices as well as worries about COVID and the broader economy, . Steel Market Update’s survey this week asked service center and manufacturing executives if they are optimistic or pessimistic about their prospects in the first half of 2022. About 64% considered themselves optimists versus […]
Algoma Steel Group Inc. has awarded GE Gas Power (GE) the contract to upgrade its natural gas combined cycle power plant to support the power requirements of the steelmaker’s new electric arc furnace (EAF). The Sault Ste. Marie, Ontario-based steelmaker said the upgrade, which includes the installation of two gas turbine packages, is expected to […]
The North American operations of Evraz produced 1.88 million metric tons in 2021, an 18.9% improvement over 2020 despite some falloff near the end of the year, the company said in its Jan. 31 trading update. The Russia-based steelmaker reported fourth-quarter 2021 production of 480,000 metric tons in North America, a 2.2% decline from the […]
Swedish steelmaker SSAB saw its best full-year earnings in company history in 2021 with all divisions posting record results thanks to high steel prices, the company said. SSAB Americas’ revenue was $6.153 billion Swedish krona ($650 million USD) in the fourth quarter of 2021, up 78% compared to the same year-ago quarter thanks to higher steel […]
I don’t want to lead prices down, but I don’t think it’s any secret at this point that sheet prices are falling fast. “The prophecies have been borne out,” is how one mill executive put it. What does that look like in practical terms? Some mills are offering hot-rolled coil at about $1,200 per ton […]
Preliminary Census data shows that steel imports in December fell 8% month-over-month to 2.89 million net tons, the fifth highest monthly level in 2021. January import licenses through Jan. 26 are currently at 2.42 million tons, a 16% decline from December and down 23% compared to November. Recall that September imports had reached a 28-month […]
Nucor Corp. crushed annual profit records in 2021 and posted yet another quarterly profit record in the fourth quarter. The trend continues a 2021 pattern among domestic steelmakers of each quarter setting a record compared to that set in the prior quarter. All told, the Charlotte, N.C.-based steelmaker posted an annual profit of $6.83 billion […]
Calling 2021 “the safest and most profitable year in the company’s history,” Nucor executives sounded “a consistent drumbeat on demand” in their outlook for 2022 during their fourth-quarter conference call with analysts and investors today. The Charlotte, N.C.-based steelmaker posted record earnings of $6.83 billion in 2021 on sales of $36.5 billion. Sixteen of its […]
Nucor Corp. crushed annual profit records in 2021 and posted yet another quarterly profit record in the fourth quarter. The trend continues a 2021 pattern among domestic steelmakers of each quarter setting a record compared to that set in the prior quarter. All told, the Charlotte, N.C.-based steelmaker posted an annual profit of $6.83 billion […]
Steel prices saw a big dip this week as the benchmark hot rolled price dropped to $1,335 per ton. That’s down more than 30% since the September peak and the lowest HR has been since the end of March 2021. Except for plate, which was pretty stable, flat rolled prices declined anywhere from $50-90 per […]
Nucor Corp. has announced that plate prices are unchanged for the second month in a row. The Charlotte, N.C.-based steelmaker announced the “$0/per ton change” with the opening of its March order book for plate. The result: Nucor’s base price for cut-to-length A36 plate remains at $1,815 per ton ($90.75/cwt) ex works. The company’s price […]
JSW Steel (USA) Inc., the U.S. subsidiary of Indian steelmaker JSW Steel Ltd., reported pretax earnings of more than $55 million in its third quarter of fiscal 2022 ended Dec. 31, 2021, outperforming year-ago results. JSW Steel’s EAF sheet mill in Mingo Junction, Ohio, reported third-quarter earnings of $42.12 million on sales of 92,557 net tons of hot […]
I want to spend some time talking about the Steel Market Update website and the value that can be found there. Over the years we have tweaked and added new content to the site as we strive to provide more information to the industry and our readers. The SMU Website There are a number of […]
I want to spend some time talking about the Steel Market Update website and the value that can be found there. Over the years we have tweaked and added new content to the site as we strive to provide more information to the industry and our readers. The SMU Website There are a number of […]
Steel mill lead times – a leading indicator of prices – continue to trend downward and are approaching what used to be considered “normal.” If lead times are nearing a point at which they may soon level off, what might that say about steel prices? Steel Market Update’s check of the market this week puts […]
Steel Market Update’s check of the market this week shows a few hot rolled transactions at prices below $1,400 per ton ($70 per cwt) as flat-rolled steel prices continue their correction from record highs last year. The average price for HRC dropped by another $55 per ton in the past week to $1,425 per ton. […]
Flat Rolled = 63.9 Shipping Days of Supply Plate = 67.1 Shipping Days of Supply Flat Rolled U.S. service center flat rolled inventories jumped in December, in line with seasonal trends. At the end of December, service centers carried 63.9 shipping days of supply on an adjusted basis, up from 57.1 in November, according to […]
Evraz North America has taken an approximately one-week unplanned outage at its plate mill in Portland, Ore., market participants said. The downtime was needed because of problems with a reheat furnace, they said. The steelmaker has also scheduled a weeklong planned outage at the Portland plate mill in March, sources said. A company spokeswoman confirmed that […]
Total mill shipments of steel products fell 3.3% in November to 8.334 million tons, slipping for only the second time in eight months. Apparent supply rose fractionally in November, up 0.2% after eroding successively the prior two months. This analysis is based on steel mill shipment data from the American Iron and Steel Institute (AISI) and import-export […]
Imports of less-expensive sheet and plate products continue to arrive on U.S. shores, a steady increase over the past seven months, driven by the need for buyers to find relief from inflated steel prices in the U.S. Although domestic steel prices have been declining, November Commerce Department data show imports’ shares of the U.S. flat products markets […]
South Korean mills are out with new lower prices for steel sheet and steady prices for plate, according to recent offers reviewed by Steel Market Update. The trend is important because U.S. mills are increasingly willing to compete with imports, meaning that the latest import offers give an indication of where domestic prices are headed. […]
As widely expected, steel prices continued to slide this week with hot rolled dipping below $1,500 per ton for the first time since April 2021. The big difference being that last April the HR price was on an upward trajectory that would eventually take it to a high of $1,955 per in early September. Since […]
Flat-rolled steel prices continue to fall, but the market participants I spoke to today were taking the news in stride. SMU’s average hot-rolled coil price now stands at $1,480 per ton ($74 per cwt), down $55 per ton from $1,535 per ton a week ago and down $475 per ton from a 2021 high – […]
November U.S. steel exports increased 1% from October to 725,000 net tons, according to the latest U.S. Department of Commerce data. While October and November levels are down compared to the summer months, the 12-month moving average through November is now at a 32-month high. Recall that March and June of 2021 were the two […]
SMU’s Community Chat webinar with Wolfe Research metals and mining managing director Timna Tanners last week was our second-best attended ever. With more than 800 registered attendees, Tanners topped her own previous record. Barry Zekelman, executive chairman and CEO of Zekelman Industries, still holds the title. But not by quite as wide a margin. We […]
Algoma Steel Group Inc. said it expects its third-quarter fiscal 2022 financial results to align with its previous guidance despite lower-than-expected steel shipments for the quarter. The Sault Ste. Marie, Ontario-based steelmaker shipped roughly 550,000 net tons of steel in the third quarter of fiscal 2022 ended Dec. 30, 2021, below prior guidance of 590,000 […]
Final Census data shows that steel imports in November rose 15% month-over-month to 3.15 million net tons, not far from September’s 28-month high of 3.26 million tons. December import licenses through Jan. 6 are just shy of 3.00 million tons, a 5% decline from November but up 9% compared to October. Total finished steel imports were nearly 2.60 million tons in […]
Lead times on spot orders from domestic steel mills continue to decline, with no sign yet of how soon they might level out. Declining lead times are a leading indicator of declining steel prices. The average lead time for hot rolled is now approaching four and a half weeks, while cold rolled and galvanized are […]
After a year in which steel mills could basically name their price, 2022 is shaping up to be a buyer’s market – at least for the foreseeable future. Nearly all (96%) of the service center and manufacturing executives responding to Steel Market Update’s survey this week reported that the mills are willing to negotiate prices […]