Pencil them in as non-believers. During our monthly steel conference call held with HARDI wholesalers who distribute steel sheet and coil, we were advised that it is only a matter of time before steel prices begin to falter. One of the wholesalers told the group, “…Forty dollars per hundredweight – How many months out of […]
Total service center carbon steel shipments declined by 241,500 tons in September compared to August but shipping days also declined by two. As a result, tons per day shipments increased from 158,100 to 161,800. Month end inventory increased by 2,000 tons to 7,604,000 tons. Intake improved from 162,210 tons per day in August to 166,940 […]
Steel Dynamics reported a strong third quarter net income of $57 million on net sales of $1.9 billion. In comparison, SDI reported $13 million net income on net sales of $1.7 billion in September 2012, and $29 million on net sales of $1.8 billion in second quarter 2013. “Our consolidated operating income increased 64 percent […]
Nucor announced consolidated net earnings of $147.6 million for the third quarter of 2013 as compared to net earnings of $85.1 million reported in the previous quarter and $110.3 million in third quarter of 2012. Net sales increased 6 percent to 4.94 billion, up slightly from $4.67 billion in the second quarter […]
CHARLOTTE, N.C., Oct. 7, 2013 — Nucor Corporation NUE +0.08% announced that The Steel Manufacturers Association (SMA) presented Nucor’s Executive Chairman Dan DiMicco with its Iverson-Selig award, recognizing his outstanding contributions to the minimill steel industry. The award is named after Nucor’s founder Ken Iverson and Marvin Selig, founder of CMC Steel, who were two […]
ArcelorMittal plans to invest $25 million in improvements in its hot-dip galvanizing line at Cleveland Works bringing its total investment over the past ten years to more than $95 million. Louis Schorsch, of the company’s group management board, told attendees at a City Club Business Leaders event last week that Cleveland Works will be a […]
Nippon Steel & Sumitomo Metal Corp. and Ternium SA announced the start-up of its joint venture steel operation, Tenigal, near Monterrey City, Mexico on Sept. 18. Tenigal is part of Ternium’s Pesqueria Project, a $1.1 billion steel complex that includes a cold-rolling plant with a 1.5 million ton annual capacity. Tenigal will produce automotive […]
Steel Dynamics offered guidance on Tuesday saying it anticipates a better third quarter as compared to the second quarter due to increase in shipments and average metal spread (spread being the difference between steel costs and selling prices). In the sheet steel segment higher volumes and better spread increased profits, while in the long products […]
In guidance remarks released Tuesday, Nucor Corp. said it expects the third quarter to outperform the second due to strong performance from its sheet and structural steel segment. Sheet steel improvements are attributed to competitor supply disruptions, customer inventory restocking and market demand improvement. The structural segment benefited from higher production following a planned maintenance […]
Other metallic coated (mainly Galvalume) imports July 2013 and YTD by source and port of entry. This is the fourth of an expanded series of analyses, exclusive to the Steel Market Update that is designed to provide a much more comprehensive view of actual flat rolled steel volume by product. This will enable a steel […]
Each month the Bureau of Labor Statistics puts out its series of producer price indexes, for thousands of goods and materials. The latest release on Friday reported August results. These statistics are a useful way to evaluate any changes in the competitive position of steel against competing materials. For the purpose of this report, Steel […]
This is one of an expanded series of analyses, exclusive to Steel Market Update that is designed to provide a much more comprehensive view of actual flat rolled steel imports by product, volume, port of arrival and country of origin. This series of reports includes hot rolled, cold rolled, hot dipped galvanized (HDG) and other […]
Prepainted flat rolled imports moderately increased in July over June for all products with the exception of prepainted cold-rolled sheet and strip. Compared to the same month one year ago, this month’s prepainted imports slightly decreased for all products with the exception of prepainted electro-galvanized sheet and strip. As you can see by our […]
Hot rolled sheet imports July 2013 and YTD by source and port of entry: This is one of an expanded series of analyses, exclusive to the Steel Market Update that is designed to provide a much more comprehensive view of actual volume by product. This will enable a steel buyer or manager to see exactly […]
Apparent steel supply is defined as domestic mill shipments to domestic locations plus imports. Sources are the American Iron and Steel Institute and the Department of Commerce. The three month moving average (3MMA) of the total tonnage of flat rolled steel sheet and strip supply was 4,305,106 tons per month in the period May through […]
Year to date through July, net imports of steel sheet products have been steadily declining as those of long products have been steadily increasing, (Figures 1 and 2). Net imports are defined as imports minus exports and at times can be negative for individual products when exports exceed imports. In the case of flat rolled […]
HARDI held their monthly steel conference call earlier today. The purpose of the call is to keep the HVAC wholesalers who sell galvanized sheet and coil in touch with market conditions and trends which could impact their businesses. The consensus of opinion, based on the comments made during the conference call, is prices remain stable […]
Other metallic coated (mainly Galvalume) imports June 2013 and YTD by source and port of entry. This is the fourth of an expanded series of analyses, exclusive to the Steel Market Update that is designed to provide a much more comprehensive view of actual volume by product. This will enable a steel buyer or manager […]
Cold rolled sheet imports June 2013 and YTD by source and port of entry. This is one of an expanded series of analyses, exclusive to the Steel Market Update that is designed to provide a much more comprehensive view of actual volume by product. In the future, this data will be available to our Premium […]
This is one of an expanded series of analyses, exclusive to the Steel Market Update that is designed to provide a much more comprehensive view of actual volume by product. This will enable a steel buyer or manager to see exactly what came into his immediate vicinity and where it came from. This series of […]
Prepainted flat rolled imports declined on a month-over-month basis on all products with the exception of prepainted cold-rolled sheet and strip. Compared to the same month one year ago, prepainted imports increased for galvanized and electro-galvanized, but decreased for cold rolled sheet and strip. As you can see by our table below – prepainted cold […]
In three months through May exports of flat products declined as those of long products remained unchanged (see graphic below). Compared to May last year total exports were up by 311 tons. This result breaks down to flat products down 21,166 tons, longs down 29,114 tons and tubulars up 43,176 tons. In all three cases […]
By Peter Wright Shipments of sheet steel products in the 2nd quarter averaged 4,114,539 tons / month, down from 4,138,875 in the 1st quarter, 0.6 percent, and down by 4.8 percent from Q2 2012. Year to date (YTD) shipments of all sheet products through the first half were 24,682,298 tons, down by 5.6 percent from […]
Imports of semi finished, and hot worked steel imports through July 2013 Imports of the combined tonnage of billets, blooms and slabs have been trending down for 12 months as have also the combined imports plate and sheet. Total long products have been trending up for all of 2013. These conclusions are based on a […]
SMU doesn’t normally publish obituaries. I found the one about Berthod Beitz former Chairman of Krupp Steel especially touching and important to acknowledge. For the younger generation the idea of death camps and the world at war must be quite foreign. Even those of us born after World War II have only faded memories of […]
Written by: John Packard Bucket Deals are Killing Regional Wholesalers and Small Distributors Somewhere along the line the idea of allowing flexible tonnage purchases on month to month tonnages originally pegged for spot purchases to go into “bucket deals” has been killing some of the smaller spot distributors and wholesalers. The worst time is now […]
Written by: Sandy Williams Essar Steel Algoma reported an EBITDA of $9.7 million and a net loss of $25.1 million for the third quarter ending December 31, 2012. Essar said lower selling prices were offset by higher volumes and lower costs compared to the same three month period in 2011. Selling prices and costs decreased […]
Nucor pushes back at potential competitor Written by: Sandy Williams Arkansas lawmakers are still delving into the feasibility of offering Big River Steel a $125 million incentive package. IHS Global Analysis was hired by the State of Arkansas to provide a third-party review of the Arkansas Economic Development Commission (AEDC) cost-benefit analysis for the proposed […]
Written by: Sandy Williams Steel shipments will be flat in the first quarter compared to the fourth quarter of 2012 said Steel Dynamics in its first quarter 2013 earnings guidance. Galvanized sheet volume is projected to decrease but be offset by increases in long product shipments, including SBQ, standard railroad rail and wide flange products. […]
Written by: Peter Wright Canadian service center tons per day shipments in February were also down overall and for all individual product groups compared to February a year ago. Their total daily shipments were 76.3 percent of the pre recession level, ranging from 102.2 percent for plate to 70.2 percent for sheet. Of all steel […]