On Thursday, Steel Market Update produced an article on lead times with the headline, “Steel Mill Lead Times: Mixed Messages.” The lead times being discussed in the article come from our proprietary survey, which is produced every other week. The lead times are based on the average from the manufacturing companies and steel service centers […]
Following on the heels of plate price increases earlier this week, the mills have announced another $50 increase on flat rolled. On Wednesday, Nucor’s Sheet Mill Group notified customers that it is increasing base prices on new orders of hot rolled, cold rolled and galvanized products by a minimum of $50 per ton, effective immediately. […]
Looking at the month-on-month changes in steelmaking raw materials costs, the prices of iron ore, pig iron and zinc have continued to experience noticeable gains, a pattern seen since the beginning of Q3 2020. As expected, scrap prices have bounced back after the downturn seen in the summer months, providing support to higher finished steel […]
Steel prices continue to see some upward momentum as flat rolled and plate prices rose by another $5-15 per ton, according to Steel Market Update’s check of the market this week. The mills announced further $40-50 price hikes on plate on Monday and Tuesday in hopes of sustaining that momentum. Here is how we see […]
Recently released Census data has preliminary August steel imports totaling 1.30 million net tons, less than half of the volume imported in July due to the quarterly reset on semifinished import quotas. This is the lowest total monthly import level seen since September 2009. Finished imports in August total 1.20 million tons, down 16 percent […]
Raw steel production by U.S. mills jumped by 2.4 percent in the week ending Sept. 26 to 1,480,000 net tons, following a small dip in the previous week. The operating rate last week hit 66.1 percent, up from 64.5 percent in the prior week. The last time production topped 66 percent of the mills’ capability was 25 […]
From one of our SMU readers to John Packard, President & CEO of Steel Market Update, “Welcome back… Regarding steel, wow. What a difference a month (or, a month and half) makes!” A second reader told us, “Market pricing and lead-times have moved aggressively…and rapidly. Many are finding themselves too late to the party.” It […]
Flat rolled steel prices continue to rise as demand improves, lead times extend and supplies remain a bit tight. Prices rose a further $10-40 per ton, based on Steel Market Update’s check of the market this week, with hot rolled reaching the psychological high mark of $600 per ton. SMU’s price momentum indicators remain pointed […]
California Steel Industries notified customers on Monday, Sept. 21, that it has raised prices on its flat rolled products by $60-70 per ton ($3.00-3.50/cwt) due to changing market conditions. Effective immediately on all unconfirmed orders, prices for hot rolled, P&O and galvanized have increased by a minimum of $60 per ton, while cold rolled is […]
U.S apparent steel supply remained flat from June to July, up 0.8 percent to 6.98 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. While June and July supply levels have both shown improvement, recall that April and May were the two lowest levels seen in […]
Domestic steel production dipped a bit last week for only the second time in the last 15 weeks. Production by U.S. mills totaled 1,446,000 net tons in the week ending Sept. 19, with the mills operating at an average utilization rate of 64.5 percent. Production in the Sept. 19 week was down 0.9 percent from the prior […]
By CRU Prices Analyst Estelle Tran, from CRU’s Global Steel Trade Service A combination of increased seasonal demand, low service center inventories, unplanned outages, spike in scrap prices and government restrictions on Brazilian slab imports have added fuel to the usual seasonal uptick and turned it into a surge. After reaching a bottom in mid-August, […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines hot rolled coil imports by region through July 2020. In July, hot rolled imports were down by 15.0 percent at the national […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines cold rolled imports by region through July 2020. In July, cold rolled imports were down by 13.8 percent at the national level, […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines hot-dipped galvanized imports by region through July 2020. In July, HDG imports were down by 12.1 percent at the national level, but […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines other metallic coated imports (mainly Galvalume) by region through July 2020. In July, OMC imports were down by 1.3 percent at the […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines coiled plate imports by region through July 2020. In July, coiled plate imports were down by 34.2 percent at the national level, […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines cut-to-length plate imports by region through July 2020. In July, CTL plate imports were down by 47.8 percent at the national level, […]
Better-than-expected demand and higher scrap prices have allowed the mills to boost flat rolled and plate steel prices, with the benchmark average for hot rolled reaching $580 per ton, according to Steel Market Update’s check of the market this week. With a few mills announcing new increases on flat rolled on Monday and Tuesday, the […]
Mills are hoping to boost flat rolled prices by an additional $50-60 per net ton as the economy and steel demand continue to improve, iron ore and scrap prices rise and mill outages tighten supplies. On Monday, U.S. Steel and sister company USS-POSCO Industries (UPI) informed customers they have raised spot prices for hot rolled, cold […]
Some leading pipe and tube producers are increasing prices by $50 per ton due to increased demand from construction and automotive-related industries, as well as higher raw material costs. On Monday, Nucor Tubular Products announced an immediate $50 increase on all new orders for HSS, pipe, mechanical and piling products. Atlas Tube followed suit on […]
Domestic steelmakers continued to dial up production last week, with raw steel output rising for the 13th time in the past 14 weeks. Production by U.S. mills totaled 1,459,000 net tons in the week ending Sept. 12, with the mills at an average utilization rate of 65.1 percent. Production in the Sept. 12 week was up […]
By CRU Senior Analyst Erik Hedborg, from CRU’s Steelmaking Raw Materials Monitor Iron ore prices have stayed elevated in the past week and even exceeded $130 /dmt, before falling back on Tuesday to just below that level. Weakening margins in the Chinese steel industry held prices from rising further and seaborne supply improved in the […]
The Steel Import Monitoring and Analysis (SIMA) system is receiving an upgrade courtesy of the Department of Commerce. A final rule was adopted on Sept. 11 that will modernize the SIMA system and set up a new online platform on the Commerce website. “These significant improvements to SIMA will enable Commerce and the public to […]
Total rolled product imports in August were down by 28.0 percent on a three-month moving average (3MMA) basis. This was the 10th consecutive month in which imports were down by more than 20 percent compared to the same time last year. This early look at August’s import volume is based on Commerce Department license data […]
Steel Market Update is pleased to share this Premium content with Executive members. The information below is excerpted from the full article, which is available to Premium subscribers on SMU’s website. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Total rolled product imports in September were down by 28.7 percent on a three-month […]
Steel import permit applications for August totaled 1,394,000 net tons—a 30.5 percent decrease from the 2,006,000 permit tons recorded in July and a 48.4 percent decrease from the July final imports total of 2,703,000, reported the American Iron and Steel Institute, based on the Commerce Department’s most recent Steel Import Monitoring and Analysis (SIMA) data. […]
U.S. steel exports continued to recover in July, up 13 percent from June to 478,182 net tons, according to recent U.S. Department of Commerce data. This is up 35 percent from two months prior when exports were at the lowest levels seen in SMU’s 24-year data history. Although up, July exports remain low historically, down […]
Mills raised plate prices by an additional $40-50 per ton ($2-2.50/cwt) on Monday and Tuesday, the second increase in the past five weeks and the fourth round of increases since May. Plate prices have lagged the increases in flat rolled as plate demand is more dependent on the infrastructure, commercial construction and energy markets, which […]
Steel Market Update’s check of the market this week shows prices for hot rolled, cold rolled and coated steels up by $20-30 per ton as demand continues to improve, lead times extend and scrap prices rise. The benchmark price for hot rolled steel now averages $540 per ton, up $100 from the low point in […]