Mills raised plate prices by an additional $40-50 per ton ($2-2.50/cwt) on Monday and Tuesday, the second increase in the past five weeks and the fourth round of increases since May. Plate prices have lagged the increases in flat rolled as plate demand is more dependent on the infrastructure, commercial construction and energy markets, which […]
Steel Market Update’s check of the market this week shows prices for hot rolled, cold rolled and coated steels up by $20-30 per ton as demand continues to improve, lead times extend and scrap prices rise. The benchmark price for hot rolled steel now averages $540 per ton, up $100 from the low point in […]
After a brief pause in late August, raw steel production resumed its upward trajectory, rising again for the 12th time in the past 13 weeks. Raw steel output by U.S. mills totaled 1,428,000 net tons in the week ending Sept. 5, with the mills at an average utilization rate of 63.7 percent. Production in the […]
By CRU Research Analyst Eduardo Tinti, from CRU’s Steelmaking Raw Materials Monitor The iron ore price rose further last week and is now approaching the $130 /dmt mark as demand from Chinese steel mills remains strong and seaborne supply declined w/w. On Tuesday, Sept. 8, CRU assessed the 62% Fe fines price at $128.0 /dmt, […]
By CRU Research Analyst Eduardo Tinti, from CRU’s Steelmaking Raw Materials Monitor In the past week, iron ore prices remained steady. Despite somewhat lower demand from hot metal production, pre-holiday restocking activity kept iron ore port outflows at a high level while the seaborne supply registered one of the best weeks in the year so […]
Recently released Census data shows final July steel imports totaled 2.70 million net tons, up 93 percent from June due to the quarterly reset on semifinished import quotas. This final July figure is just 5,995 tons higher than the preliminary import figures SMU reported one week ago. Finished imports in July totaled 1.43 million tons, […]
Last Thursday, USS-POSCO notified customers of a revision to its galvanized steel coating extras. UPI advised customers the new extras will apply on all new orders effective immediately. UPI is the fifth mill to revise its galvanized coating extras recently, following Steel Dynamics, California Steel Industries, Nucor and U.S. Steel. SMU has done an analysis […]
On Wednesday, U.S. Steel notified customers of a revision to its galvanized and galvannealed steel coating extras. USS advised customers, “The cost to procure zinc for our Hot Dipped Galvanized products has increased significantly in recent weeks, with the average LME zinc price now above the current coating weight tables that we put in place […]
Mills have hiked prices on flat rolled and plate steels in the past 10 days and it appears they will collect at least a portion of the increases. Steel Market Update’s check of the market this week shows prices up as much as $30 per ton, depending on the product, on top of a $10 […]
After 11 straight weeks of increased steel production, raw steel output and mill capability utilization took a slight step backward last week. Raw steel output by U.S. mills totaled 1,383,000 net tons in the week ending Aug. 29, with the mills at an average utilization rate of 61.7 percent. Production in the Aug. 29 week was down […]
By CRU Senior Analyst Erik Hedborg, from CRU’s Raw Materials Monitor The iron ore price has risen again in the past week as offloading activities have continued while demand from China’s steel mills has been robust. On Tuesday, Sept. 1, CRU has assessed the 62% Fe fines price at $124.5 /dmt, up by $1.5 /dmt […]
Last Friday, Nucor notified customers of a revision to its galvanized coating extras. Nucor advised customers, “Consistent with our practice to monitor the cost of zinc, we have revised our galvanized coating weight extras effective with new orders acknowledged for the week ending Oct. 10, 2020.” Nucor is the third mill to revise its galvanized […]
Among steelmaking raw materials, the prices of iron ore, pig iron and zinc have seen big gains in the past three months. Scrap prices have been challenged, but saw some improvement in August, notably in the coastal regions, and are expected to rise in September, lending support to higher finished steel prices. Table 1 summarizes […]
Recently released preliminary steel import data shows July imports totaling 2.69 million net tons, according to the U.S. Department of Commerce. This is up nearly twofold over final June import figures, primarily due to the quarterly reset on semi-finished import quotas. Taking semifinished products out of the picture, imports of finished steels rose 7 percent from […]
Following on a similar move by the plate mills earlier in the week, flat rolled mills announced price changes Wednesday and Thursday ranging from $40 to $60 per ton. Nucor’s Sheet Mill Group notified customers today, Aug. 27, that it has increased base prices on new orders of hot rolled, cold rolled and galvanized steel […]
California Steel Industries notified customers on Wednesday that it will be raising the extra charge for galvanized coatings due to an increase in the market price of zinc. CSI advised customers: “Due to changing zinc costs, our Galvanized Coating Extras have been revised. These changes will be effective beginning with orders placed for October shipment […]
Global steel production continued to decline in July. The World Steel Association reports crude production fell 2.5 percent year-over-year to 152.7 million metric tons based on reporting and estimates by 64 countries. The COVID-19 crisis and its disruption to economic activity was blamed for the fifth month of consecutive decline. Robust demand boosted China crude […]
Prices for flat rolled steel products moved up by as much as $20 per ton in the past week, while plate increased by $10, according to Steel Market Update’s check of the market on Monday and Tuesday. SMU’s Price Momentum is higher on sheet products, but Neutral on plate products, as the plate mills’ price […]
Many steel buyers have been anticipating a price increase, and the plate mills were the first to make a move. ArcelorMittal USA, Nucor and SSAB all announced changes to their plate prices, but not in the typical lock-step fashion. Nucor informed customers on Friday that it was setting a minimum base price of $28/cwt ($560 […]
For the 11th week in a row, domestic steelmakers continued to dial up their production–a sign of improving steel demand. Raw steel output by U.S. mills totaled 1,412,000 net tons in the week ending Aug. 22, with the mills hitting an average utilization rate of 63.0 percent, reported the American Iron and Steel Institute. That’s a […]
Steel Dynamics Inc. has revised their galvanized coating extras due to the recent increase in zinc prices. SMU has done an analysis on the old and new extras, provided below. SDI extras increased an average of 20.3 percent. Zinc prices declined significantly during the first quarter of the year, dropping from January’s high of $1.1186 […]
Galvalume supplies are shaping up to be tight in the fourth quarter, but fears of a shortage may be overstated, sources tell Steel Market Update. Despite a recent press report to the contrary, Galvalume is one of the strongest steel sectors right now. “There is no shortage at the right price,” said one mill executive. […]
By CRU Senior Analyst Erik Hedborg from CRU’s Steelmaking Raw Materials Monitor Iron ore prices have held steady in the past week as import restrictions on Australian ore have disrupted the supply chain and reduced the availability of Australian fines. As a result, port inventories of fines products remain at the lowest level in years. […]
U.S apparent steel supply inched upwards in June to 6.93 million net tons, according to U.S. Department of Commerce and American Iron and Steel Institute data. While up over the previous month, April and May were the two lowest supply levels in the last 10 years at 6.54 million tons and 6.61 million tons, respectively. […]
By CRU Senior Analyst Erik Hedborg, from CRU’s Steelmaking Raw Materials Monitor Iron ore prices continued their upward trajectory and traded at $123.0 /dmt on Tuesday, Aug. 18, a $3.0 /dmt increase w/w. Chinese demand remains strong and the challenges of delivering ore from vessels to steelmakers remain in place. Chinese domestic steel prices have […]
Hannibal Industries, the long-time California-based manufacturer of structural and mechanical tubing, has decided to exit the tubing products market to concentrate on its racking and material handling business. “Hannibal has made the decision to direct all of our tubular product manufacturing capacity, our capital and our human energy into our material handling products and services. […]
U.S. steel exports in June increased 20 percent from the prior month’s 24-year low. Now standing at 423,000 tons, June exports are 29 percent lower than levels one year prior, according to recent U.S. Department of Commerce data. The 2020 monthly average for exports has decreased to 522,000 tons, whereas the first six months of […]
The analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source nation. We believe that misinformation (or lack of) about local import volume is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
Steel Market Update’s check of the market this week shows hot rolled offers typically in the $460-$480 range. But sources tell us actual transactions are occurring anywhere from $480 down to $400, depending on volumes and other considerations. Thus, SMU puts the current benchmark price for hot rolled at $440 per ton, down $10 from […]
Steel Market Update’s check of the market this week shows flat rolled steel prices firming up a bit as demand slowly recovers from the coronavirus disruptions. SMU puts the current benchmark price for hot rolled at $465 per ton, up from $440 last week. SMU’s Price Momentum Indicators remain at Neutral, though the market may […]