U.S. steel exports in December totaled 519,099 net tons (470,919 metric tons), down 15.7 percent from November, and down 31.0 percent from levels one year ago. The last time total steel exports were this low was over 16 years ago, back in July 2002, when 504,621 tons of steel were exported outside of the United […]
By CRU Senior Analyst Erik Hedborg In the past week, iron ore prices continued to decline as demand in China remained weak. Steel prices continued to fall and buying activities have yet to pick up after the 13th National People’s Congress (NPC) began its annual two-week meeting on March 5. On Tuesday, March 12, CRU […]
Total raw steel production for the month of January rose to 8,286,886 net tons, reports the American Iron and Steel Institute in Washington. This is one of the higher levels seen over the last few years. Broken down by production method, 5,717,191 tons (69.0 percent) were produced by electric arc furnaces (EAFs) and 2,569,695 tons […]
As markets transition from one phase to another, the process can sometimes be “messy” until there is a clear direction as momentum shifts. Many steel buyers reported a higher sense of confidence that the market has “turned the corner” and will move higher from here. However, the feelings are not universally shared as some buyers […]
SSAB Americas notified customers today, March 7, that it intends to raise its transaction prices by a minimum of $40 per ton effective immediately for all new non-contract orders acknowledged for shipment the week of April 28 and beyond. The increase applies to As-Rolled Mill Plate, Cut-To-Length Plate >72”, Hot Rolled Coils >72”, as well […]
Foreign steel imports dropped to an eight-year low in December, coming in under 2 million net tons, according to final data released Wednesday by the U.S. Department of Commerce. Removing the 200,000 tons of semi-finished steels (mostly slabs used by domestic steel mills), finished steel imports were just under 1.7 million net tons. As shown […]
Steel Market Update did not see a huge move in flat rolled steel prices this week. Our benchmark hot rolled average rose a modest $5 per ton, but is still below $700 per ton and a long way away from the $730 per ton suggested by ArcelorMittal USA in their announcement email. The other flat […]
U.S. steel mills reached an average capability utilization rate of 82.8 percent in the week ending March 2. Domestic raw steel production for the week totaled 1,927,000 net tons, up 1.0 percent from the prior week and 5.9 percent from the same period last year. This is the highest capacity utilization rate seen in over […]
Service center executives polled by Steel Market Update on Monday and Tuesday reported spot prices firming up, though perhaps not enough for the mills to collect both $40 increases they have announced in the past month. Below are some of their comments on the current price momentum for flat rolled and plate steel, as well […]
Flat rolled steel prices have begun moving higher. Benchmark hot rolled coil (HRC), which has been one of the weakest of the flat rolled products recently, was up $10 per ton. Cold rolled did even better, up $15; galvanized better than CR, up $20; and Galvalume bested them all, up $25 per ton compared to […]
For the week ending Feb. 23, domestic raw steel production totaled 1,907,000 net tons. The mills achieved an average capability utilization rate of 81.9 percent, up 1.1 percent from the prior week and 5.0 percent from the same period last year. The U.S. steel industry has produced 14,644,000 tons of steel so far in 2019, […]
As of Feb. 26, with the month nearly complete, U.S. steel imports were trending at less than 2.5 million tons, based on license data from the U.S. Department of Commerce. February imports are likely to finish the month well below January and below the 3- and 12-month moving averages as well. Semi-finished steels continue to […]
By CRU Analyst Jordan Permain Iron ore prices declined for the second consecutive week as the market awaits the announcement of stimulus measures in China. On Tuesday, Feb. 26, CRU has assessed the 62% Fe fines price at $84.70 /t, down $1.90 /t w/w. Steel demand has remained weak in China in the past seven […]
In the last month, there has been a positive turnaround of raw materials prices. Table 1 summarizes the price changes through February of the five materials considered in this analysis. It reports the month/month, 3 month/3 month and 12 month/12 month changes and tells us that price movements with the exception of busheling have been […]
By CRU Latin America Analyst Thais Terzian On Jan. 25, one of Vale’s tailing dams located in Brumadinho, Minas Gerais, breached. The dam was part of Vale’s Córrego do Feijão mine and its breach tragically caused the death of several hundred people. On Jan. 29, Vale announced the suspension of production at nine mines in its […]
On Wednesday morning, Nucor announced a $40 per ton ($2.00/cwt) “minimum” price increase on flat rolled steel products. The mill advised their customers the increase was to be “effective immediately.” This is the second price increase announcement out of Nucor in less than 30 days. On Jan. 28, 2019, Nucor announced a $40 per ton […]
As the domestic steel mills started raising flat rolled prices on Wednesday, Steel Market Update reached out to a number of steel buyers in order to get their reaction to the news. We discussed the $40 per ton increases announced by Nucor, NLMK USA, U.S. Steel, California Steel and USS/POSCO along with ArcelorMittal USA’s new […]
We found mixed results in flat rolled steel prices this week. Steel buyers are telling Steel Market Update that the bottom has been “firming” and that prices are moving sideways to slightly higher on most products. SMU talks more about price momentum and pricing in a separate article in tonight’s issue. Here is how we […]
The U.S. steel industry has produced 12,737,000 tons of steel so far in 2019, an 8.4 percent increase from the same period last year. Mill utilization has averaged 80.7 percent this year, up substantially from the 75.7 percent in 2018, reported the American Iron and Steel Institute. For the week ending Feb. 16, the average […]
The U.S. Department of Commerce released new license data through the 19th of February and the trend for imports is at 2.6 million net tons (+/- 200,000 tons). Semi-finished steels continue to be the largest single product imported, with most being slabs heading to mills like California Steel, NLMK USA, JSW USA and ArcelorMittal Mobile. […]
By CRU Senior Analyst Erik Hedborg During the past week, iron ore prices fell somewhat as weak Chinese demand continued to weigh on the market. On Tuesday, Feb. 19, CRU assessed the 62% Fe fines price at $86.60 /t, down $3.70 /t w/w. Again, the Vale dam accident dominated the talks in the market. Although […]
By CRU Analyst Jordan Permain In the previous edition of CRU’s Steelmaking Raw Materials Monitor, we outlined our expectation of falling prices as coke demand would weaken once restocking after the CNY holidays finished. This turned out to be true; coke demand has been low after mills completed their restocking and, as coke production remained […]
By CRU Senior Analysts Erik Hedborg and Andrew Gadd CRU’s research shows that the dam breach in Brazil, as well as the recent fire at Vale’s blending terminal in Malaysia, will have limited impact on the availability of high-grade fines. Iron ore prices of all different grades have increased since the dam breach, but the […]
February imports are trending high, close to 3 million net tons, according to U.S. Department of Commerce license data released Feb. 12. However, looking at the data more closely, the domestic steel mills continue to bring in a tremendous amount of semi-finished steels (slabs, billets – but most are slabs). The mills are on pace […]
Steel prices are trying to rise following the $40 per ton increase announced by the mills last month, but how fast, how far and for how long remains the subject of much speculation. Comments from SMU’s market canvas this week show buyers with two basic views: Either, “Mills are very firm on pricing. We’ve got […]
Cleveland-Cliffs announced that CFO Timothy K. Flanagan is leaving the company and will be succeeded by Keith Koci as executive vice president and chief financial officer, effective immediately. Regarding the personnel change, Cleveland-Cliffs’ Chairman, President and Chief Executive Officer Lourenco Goncalves, stated: “I appreciate the work done by Tim Flanagan during the last several years […]
The average capability utilization for U.S. steelmakers hit 81.5 percent in the week ending Feb. 9, the highest rate in about three months, with the mills producing 1,897,000 net tons of steel. Production increased 0.4 percent from the prior week and was up 4.4 percent from the same week the prior year, reported the American […]
November apparent steel supply was calculated at 9,140,649 net tons, according to data released late last week. Apparent steel supply is determined by adding domestic steel shipments and finished U.S. steel imports, then subtracting total U.S. steel exports. November apparent steel supply saw a 417,102 ton or 4.8 percent increase compared to the same month […]
U.S. steel exports in November totaled 615,818 net tons (558,661 metric tons), down 2.4 percent from October, and down 30.2 percent from levels one year ago. After the September 2018 low of 584,858 tons, last November is the next lowest month for exports since February 2009 when 602,945 tons of steel were exported outside of […]
By Erik Hedborg, CRU Senior Analyst The recent dam breach in Brazil will complicate iron ore pellet premia negotiations and is likely to lead to steel mills eventually accepting sharp premia increases. As a result of the dam breach, Vale has suspended 11 Mt/y of pellet production in the Southern System and the recently revoked operating […]