Steel Market Update was speaking with one of the plate mills regarding their maintenance schedules and order books, which we reported on in Thursday evening’s issue of our SMU newsletter. During the conversation, there was a discussion about what was causing the tightness in the marketplace, and the mill mentioned the drastically lower plate imports […]
This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) about local import volumes is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]
Steel Market Update is sharing the following Premium-level content on flat rolled imports with Executive-level members. For more information about upgrading to a Premium-level subscription, contact info@steelmarketupdate.com. This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) […]
Premium subscribers to Steel Market Update have access to reports on our website that break out the import tonnage into district of entry and source nation for six sheet and plate categories. SMU has now developed reports that drill down the HRC and CRC into product detail both nationally and for each district. We report […]
Both the plate mills and their customers are advising Steel Market Update that, unlike the hot rolled markets, the plate markets are hot and are expected to continue to be hot for some time to come. The plate mills continue to be on “controlled order entry” (allocation) and all of the mills are struggling to […]
U.S. steel exports in July totaled 655,937 net tons (595,057 metric tons), down 28.2 percent over June and down 18.7 percent from July 2017. This is the lowest total export figure seen since May 2009 when 627,968 tons were shipped out of the country. Prior to July, total exports had averaged around 875,000 tons the […]
Flat rolled spot base prices continued to drop over the past week. There are mixed emotions from steel buyers with some believing the weakness being seen is an “overreaction” to a “perceived” weakness in the steel mill order books. Comments were made to Steel Market Update during the data gathering process that weakness is mill […]
Manufacturing companies and service centers are in agreement, service center spot prices to their customers are negotiable and dropping. Our most recent flat rolled steel market analysis conducted this past week found a growing percentage of manufacturing companies reporting their service center suppliers as lowering spot steel prices. At the beginning of July 2018, there […]
U.S. raw steel production finally topped the 80 percent capaciity utilization level the industry considers necessary for sustainable profitability. The American Iron and Steel Institute reported a utilization rate for the week ending Sept. 8 of 80.2 percent, up from 79.8 percent in the prior week, and up from 73.4 percent the same week one […]
Over the past few weeks, a number of domestic steel mills have announced new zinc coating extras for galvanized steel. The reason behind the adjustment has been due to the price of zinc moving lower on the LME spot market. Steel buyers should not assume that all of the steel mills are using the same […]
Written by John Packard, President & CEO, Steel Market Update When I was selling steel for a domestic mill (Winner Steel, now called NLMK Sharon), there was always cause for concern when steel buyers would contact me and reference a price from a trade publication that I knew to be “out of date” with the […]
The U.S. Department of Commerce released Final Census Data today for July steel imports. The final number for July was 2,987,565 net tons. This is approximately 500,000 net tons more than June of this year. It was close to the 12-month moving average and slightly higher than the 3-month moving average (see table below). At […]
Are the Section 232 tariffs affecting the volume of steel imports? We will look at this several different ways, as the answer depends on what time frame is chosen for comparison. Commerce Secretary Wilbur Ross said on Aug. 10 that since the imposition of Section 232 tariffs in March, imports to the U.S. have declined […]
Once again flat rolled steel prices fell as steel buyers held back orders sensing blood in the water (lower prices). As one service center owner put it to Steel Market Update this afternoon, “The question is how weak can it get?” We were told the market had been acting like it had a “slow leak” […]
U.S. raw steel production continues to surpass previous highs, just a hair away from the 80 percent capability utilization level sought by the industry. The American Iron and Steel Institute reported a utilization rate for the week ending Sept. 1 of 79.8 percent, up from 79.3 percent in the prior week, and up from 75.4 […]
The Trump administration tariffs have had the expected effect on steel imports and steel pricing this year, but prices for hot rolled coil and plate could moderate a bit next year as economic growth slows and the cost of steelmaking raw materials begins to decline, forecasts Josh Spoores, principal steel analyst for the CRU Group. […]
Flat rolled steel prices declined over the past week. We saw prices drop by $15 per ton on all products except hot rolled, which was down $5 per ton. Plate prices remained the same with prices essentially rolling over for many customers from October to November. However, plate buyers are warning SMU of maintenance issues […]
Earlier this week, the U.S. Department of Commerce released preliminary license data for July foreign steel data and license data for August. The latest data suggests July imports will rebound from June’s dip to almost reach 3.0 million net tons, and August levels will be in the 2.85 million ton ballpark. Semi-finished imports (slabs/billets) continue […]
Table 1 summarizes the August prices of the five materials considered in this report and the month/month, three months/three months and year/year change. In the last month, coking coal FOB Australia’s East Coast eked out a small gain as the other four experienced price declines. At the Jackson Hole meeting of the Fed on Friday, […]
Recent price changes have been mixed for steelmaking commodities. In the last three months, coking coal and iron ore have trended up as pig iron, scrap and zinc have trended down. Table 1 summarizes the September prices of the five materials considered in this report and the month/month, three months/three months and year/year change. Iron […]
The American Iron and Steel Institute reported a mill capability utilization rate for the week ending Aug. 25 of 79.3 percent, down slightly from 79.5 percent in the prior week, but up from 75.8 percent in the same week last year. Raw steel production for the week ending Aug. 25 totaled 1,858,000 net tons, the sixth week in a […]
Earlier this week, the U.S. Department of Commerce released the latest license data on foreign steel for the months of July and August. As SMU reported last week, the August trend has been for imports to be at, or above, 3 million net tons. This week the trend suggests August will be closer to 2.9 […]
Flat rolled steel prices moved lower over the past week. Benchmark hot rolled coil dropped to $885 per ton and momentum continues to point toward lower prices on all but plate products. Here is how we see prices this week: Hot Rolled Coil: SMU price range is $860-$910 per ton ($43.00/cwt-$45.50/cwt) with an average of […]
U.S. mill capability utilization hit another new high for the year last week, moving closer to the 80 percent level sought by the industry. The American Iron and Steel Institute reported a utilization rate for the week ending Aug. 18 of 79.5 percent, up from 79.1 percent in the prior week, and up from 75.8 […]
CRU zinc analyst Helen O’Cleary reported late last week on what was causing the short-term movement of zinc pricing: “Zinc’s price has been pressured lower again in recent days on a combination of risk-averse investor sentiment, U.S. dollar strength and a sizeable delivery of warrants into the LME’s New Orleans warehouses. It breached support at […]
By CRU Group’s Zinc Analysis Team Despite lower-than-expected smelter output in China last year, which contributed to record refined deficits, 2018 marked the turning point for zinc’s price, reports CRU Group’s Zinc Analysis Team. Despite a still-tight refined market with stocks at critical levels, zinc’s price has had a shaky start to 2019, trading at […]
There are big differences in the year-to-date increase of hot rolled coil imports on a regional basis, according to Steel Market Update’s latest analysis of government data. Imports of hot rolled coil into the U.S. as a whole were up by 21.4 percent in June year to date, but the Pacific South was up by […]
The Great Lakes and Gulf dominate as entry points for cold rolled imports. There are big differences in the year to date decreases on a regional basis, according to Steel Market Update’s latest analysis of government data. Imports of cold rolled coil into the U.S. as a whole were down 23.1 percent year to date […]
Zekelman Industries, Inc., a manufacturer of steel pipe and tube, has filed for an initial public offering with the U.S. Securities and Exchange Commission. The company listed an offering of $100 million and hopes to complete its IPO this year, according to Bloomberg. Zekelman posted net income of $161 million on net sales of $2.1 […]
This analysis breaks down the imported tonnage of six flat rolled products into the district of entry and the source country. We believe that misinformation (or lack of) about local import volumes is often used to influence purchase decisions. Our intent with this analysis is to describe in detail what is going on in a […]