For the week ending January 14, 2017, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,716,000 net tons of raw steel, a 1.9 percent increase over the previous week and a 6.8 percent increase over the revised rate from the same week one year ago. The estimated capacity utilization rate […]
On Monday, California Steel Industries (CSI) advised their customers that their March 2017 order book is now open and that transaction (spot) pricing would be increasing by $40 per ton on hot rolled, hot rolled pickled & oiled, cold rolled and galvanized steel products produced by the mill. California Steel began increasing prices as they […]
Late today the U.S. Department of Commerce released updated foreign steel import license data for the months of December and January. Since we are now half way through the month our interest is mainly with the month of January as we are trying to determine if there is any pull-back in flat rolled steel tonnages. […]
The Chinese government is attempting to make a stand against the extreme pollution plaguing the country. One of the largest polluting industries is the steel industry through its use of coal. The march against pollution is expected to have mixed results when it comes to iron ore and steel prices. Iron ore prices were reported […]
Flat rolled steel and plate prices continued their march higher this past week based on the steel price indexes followed by Steel Market Update. Benchmark hot rolled coil (HRC) which is the base thickness prior to extras being added, is working its way toward the latest “minimums” set out by ArcelorMittal in their recent price […]
November steel exports totaled 729,391 net tons (661,693 metric tons), down 4.8 percent over October but up 2.4 percent from November 2015. This is the lowest export level seen since December 2015 when 658,362 tons were exported. Total November figures are below the thee month moving average (average of September, October, and November 2016 figures) […]
Chinese finished steel exports are beginning to drop month over month. In December, finished steel exports were down about 4 percent from November to 7.8 million tonnes. In comparison to a year ago, December exports had fallen approximately 27 percent from a record 112.4 million tonnes. Looking at the data by quarter finished steel exports […]
The U.S. Department of Commerce (DOC) has released Final Census numbers on foreign steel imported into the United States through November 2016 and has updated license data for the month of December 2016. This provides us with our first look at imports for the year so we can do a comparison against 2015 to see […]
This article was previously published on Wednesday, January 11th for our Premium level members. We are sharing this article with our Executive level members as we thought it would be interesting to look at our 2016 import analysis and then be aware that we have much more data available in our website for our Premium […]
According to the latest data released from the U.S. Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of November 2016 was 8,144,758 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports, then subtracting total US steel exports. November apparent […]
In the first eleven months of 2016, total ferrous steel scrap exports were 11,428,000 tonnes, down by 11.8 percent from the first 11 months of 2015. The tonnages shown in Figure 1 are based on three month moving averages for 2016 and on the annual monthly average for previous years. The graph shows that exports […]
Essar Steel Minnesota is suing Essar Global Group for $1 billion in damages for financial misconduct related to its uncompleted iron ore-facility. Essar Minnesota alleges that parent company Essar Global Fund failed to provide necessary operating funds and make investments needed to complete the iron ore pellet plant under construction at ESML. The motion also […]
OK, don’t get freaked out (yet) as the new flat rolled steel base price increases aren’t really impacting the numbers for this week. However, there were a couple of steel mills already seeking higher hot rolled, cold rolled and coated prices prior to the announcement. We did collect some of that data in tonight’s steel […]
On Friday of this past week AK Steel announced a $40 per ton ($2.00/cwt) spot base price increase on all the flat rolled products they produce: hot rolled, cold rolled and galvanized steels. On Monday morning, NLMK USA followed with the same $40 per ton announcement. We learned NLMK lead times are in February on […]
For the week ending January 7, 2017, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,684,000 net tons of raw steel, a 5.8 percent increase over the previous week and a 4.8 percent increase over the revised rate from the same week one year ago. The estimated capacity utilization rate […]
We believe that misinformation (or lack of) about regional steel import volumes is often used to influence purchase decisions. Our intent with this analysis of tonnage by district of entry is to describe in detail what is going on in a company’s immediate neighborhood and thus provide a negotiating advantage for for premium subscribers. We are now […]
On Friday, January 6, 2017, AK Steel became the first U.S. steel mill to increases flat rolled steel spot prices. The mill announced an increase of $40 per ton ($2.00/cwt) effective immediately on all flat rolled, which for them includes hot rolled, cold rolled and galvanized steel products. This is now the fifth (5th) price […]
There was very little movement in flat rolled steel prices according to the Platts and Steel Market Update steel indexes. This is expected to change as we move into the second week of the New Year as AK Steel announced a new $40 per ton price increase on Friday. Benchmark hot rolled is being reported […]
The steel buyers and sellers of steel who responded to our first flat rolled steel market trends survey of the New Year foretold the move by AK Steel to raise flat rolled steel prices late on Friday. Eighty-one percent of the respondents reported that they were expecting another flat rolled steel price increase (the 5th […]
On Friday, the U.S. Department of Commerce reported the Final Census numbers for November foreign steel imports into the United States. November steel imports totaled 2,805,763 net tons. This was approximately 100,000 tons higher than October. When looking at the individual items it appears the difference between the two months can be found in the […]
Licensed data for December was reported by the Steel Import Monitoring System of the US Commerce Department on January 3rd. An explanation of the methodology that use at SMU to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. In December, on […]
The American Iron & Steel Institute (AISI) recently reported final U.S. raw steel production estimates for the month of November 2016. The monthly estimates are different than the weekly estimates we report in our Tuesday issues; the AISI bases the monthly estimates on over 75 percent of the domestic mills reporting vs. only 50 percent […]
The engines are warming up and the expectation is for a better 2017 than 2016. The data we collected today was not significantly different than what we were seeing one week ago. Many mills are telling their customers they are on an “inquire only” basis when it comes to new spot orders. We are also […]
When we ended 2015 benchmark hot rolled base prices averaged $375 per ton ($18.75/cwt), cold rolled base average was $515 per ton ($25.75/cwt) and the spread between HRC and CRC base prices was $140 per ton ($7.00/cwt). Galvanized base prices averaged $510 per ton ($25.50/cwt) and the spread between HRC base and that of Galvanized […]
We ended 2016 with a semblance of agreement as to where flat rolled steel prices stood. The table below is for last week and does not include price adjustments that may have been made this week. Hot rolled prices now average more than $600 per ton with SMU at $610 per ton and SteelBenchmarker $608 […]
For the week ending December 31, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,592,000 net tons of raw steel, a 2.7 percent decrease over the previous week but a 7.2 percent increase over the same week one year ago (revised). The estimated capacity utilization rate is 67.1 percent, […]
We are but a few days away from the beginning of the New Year. We thought it prudent as we plan for 2017 that we take a look at what transpired with flat rolled steel prices over the course of the past 12 months. Because the market “bottomed” in December 2015 we have expanded our […]
For the week ending December 24, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,636,000 net tons of raw steel, a 3.4 percent decrease over the previous week but a 10.2 percent increase over the same week one year ago (revised). The estimated capacity utilization rate is 69.0 percent, […]
The U.S. Department of Commerce reported Preliminary Census Data for November showing foreign steel imports totaling 2.8 million net tons for the month.This is up from 2.7 million net tons reported during the month of October. We saw increases in semi-finished of 210,000 net tons which accounted for the larger numbers. Semi-finished steels include slabs […]
The data collected late last week and through the day today was spotty at best. However, we feel confident from the numbers we were able to collect to make some minor adjustments in our hot rolled and cold rolled indices. With the Holiday Week upon us SMU does not anticipate another round of price increases […]