The Organization for Economic Co-operation and Development’s Steel Committee expressed concern over unbalanced steel market conditions in a new report following its 88th Session last week. Steel capacity continues to increase despite a slump in demand caused by the global pandemic. The OECD says global steelmaking capacity is expected to increase to 2,455.8 million metric tons […]
U.S. consumer confidence has suffered drastically from the pandemic, but has shown some positive signs of late. The composite value of consumer confidence in September, reported by The Conference Board, was 101.8, surpassing the 100 mark for the first time since March 2020. The three-month moving average (3MMA) moved up to 93.3. Despite the increase, the […]
By CRU Senior Cost Economist Ross Cunningham and CRU Research Analyst Eric Lucking, from CRU’s Global Steel Trade Service At CRU, we forecast the exchange rates for all the countries where our relevant commodities are produced. Our short and medium-term view is reviewed each quarter. This is anchored to our long-term forecast, which uses a […]
Steel prices continued their upward trajectory in September as demand rose further and mills announced more increases on hot rolled, cold rolled and galvanized products. Steel Market Update’s hot rolled price averaged $568 per ton in September, an increase of more than $100 month/month, and has since topped the $600 mark. Average prices for prime […]
Global manufacturing continued its road to recovery in September. The J.P. Morgan Global Manufacturing PMI rose to a 25-month high of 52.3 from 51.8 in August, for a third consecutive month of expansion. All of the index components were solidly above the 50 neutral point except for employment, which posted a PMI of 49.5. A […]
SMU contributor Tim Stevenson is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Tim’s previous role, he was a Director at Cargill Risk Management, and […]
The manufacturing sector grew again in September, indicating a fifth month of expansion for the economy, according to the latest Manufacturing ISM Report on Business. The September PMI registered 55.4 percent, down 0.6 percent from August. “Manufacturing performed well in the month with demand, consumption and inputs registering growth indicative of a normal expansion cycle,” […]
Business activity in the Chicago area surged in September, expanding for the third month in a row. The MNI Chicago Business Barometer soared 11.2 points to 62.4, its highest level since December 2018. Business sentiment jumped sharply to 55.2, its best performance since Q1 2019. Production jumped 16 points, nearing a two-year high, while demand […]
The following comments were made by an importer of European steel as SMU was updated on their view of the industries they service in the United States. SMU thought the comments provide an interesting perspective for our readers: “Auto has been coming back strong. I don’t see the impact on the domestic mills, but I […]
Orders for durable goods rose for the fourth consecutive month in August but at a much slower pace than July, said the Department of Commerce. New orders for manufactured goods expected to last at least three years increased 0.4 percent to $232.8 billion in August, a sharp deceleration from the 11.7 percent surge in July. The August […]
Chicago-based service center and steel processor UPG Enterprises LLC, announced the acquisition of Lex Holding Co. The acquisition will expand UPG’s distribution of flat rolled steel products in the Midwest markets and further diversify their product line and logistical capabilities. The deal includes Lexington Steel Corp., a full-line distributor of flat rolled steel products based in Chicago […]
By CRU Senior Analyst Helen O’Cleary and found in CRU’s Zinc Monitor US steel mills have reportedly been taking more refined zinc over the past few weeks and the outlook for Q4 is looking slightly more positive according to market contacts. There have been suggestions that the uptick in spot demand from mills could be […]
The Architecture Billings Index remained stuck at a score of 40 for the third consecutive month in August, indicating a prolonged decline in billing activity at architecture firms. The new project inquiries index provided a glimmer of optimism, rising for the first time since February to a positive score of 51.5. The value of new […]
By CRU Chief Economist Jumana Saleheen and Economist Anissa Chabib The U.S. economy has seen a faster than expected resumption of economic activity since the “stay at home” orders ended in May. Most notable has been the improvement in the labor market. The number of people who lost their jobs in March and April was […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Hot Rolled Since I last reported on the last Thursday in August, we have seen a strong move higher in both spot […]
Steel Market Update is pleased to share this Premium content with Executive members. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. Following is an analysis of Bureau of Labor Statistics (BLS) Producer Price Index data. The PPI is a family of indexes that measure the average change over time in the prices received […]
The U.S. dollar weakened against 12 of the 16 steel and raw materials trading nation currencies in the last 30 days and against 11 in the last 90 days, which is similar to the declines that we reported for June and July. The biggest changes in the last 90 days were in the value of […]
U.S. manufacturing indicators continued to show signs of improvement in July and August data as the economy recovers from the coronavirus shutdowns. The health of the manufacturing economy has a direct bearing on the health of the steel industry. The Industrial Production Index The Industrial Production (IP) index is a gauge of output from factories, […]
Business activity continued to improve in New York State in September. The Empire State Manufacturing Survey general business conditions index soared 13 points to a reading of 17.0, its third consecutive positive reading this year. New orders rose modestly while shipments increased significantly, gaining seven points to register 14.1. Delivery times lengthened and inventories and […]
Ashland, Ky., will get a welcome infusion of jobs from Danieli USA after the closing of AK Steel Ashland. Danieli has rented a 130,000-square-foot building near the AK Steel mill and will operate a repair and refurbishment center serving steel producing clients in North America. The Italian firm is one of the world’s largest suppliers of […]
Employment in manufacturing and construction is recovering much more slowly than in the overall economy. The net change in employed persons was negative 20.8 million in April. Each month since then has had positive growth, but the recovery slowed in July and August. We have created a new summary chart for August to track the overall […]
The net change in employed persons in September was 661,000. Employment gains have slowed each month since June when 4.8 million jobs were recovered. The baseline against which future comparisons will be made is February 2020, the all-time high for nonfarm employment. Figure 1 shows the total number of people employed in the nonfarm economy. […]
Through October, manufacturing has added 742,000 jobs and construction 789,000 since the pandemic-driven crash in April. The baseline against which future comparisons are made in this analysis is February 2020, the all-time high for nonfarm employment. Figure 1 shows the total number of people employed in the nonfarm economy. Table 1 is designed on rolling […]
SMU contributor Tim Stevenson is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Tim’s previous role, he was a Director at Cargill Risk Management, and […]
By CRU Chief Economist Jumana Saleheen, from CRU’s Global Economic Outlook Since lockdown restrictions eased in May the global recovery has been strong, but with marked differences across countries and sectors. The strong recovery in China is partly due to its better virus trajectory over the summer, which has allowed confidence to return. This has […]
Steel Market Update is please to share this Premium content with Executive members. For information on upgrading to a Premium-level membership, email Info@SteelMarketUpdate.com. Nonfarm employment is improving, but made back less than half the losses seen in the two months of March and April in the four-month period from May through August. The August jobs […]
The September jobs report was released by the Bureau of Labor Statistics (BLS) on Friday and failed to meet the consensus expectation. September’s net gain was 661,000. The average monthly gain in the four months May through August was 2.7 million. In the September data, the July gain was revised up by 27,000 and August […]
The economy added 638,000 jobs in October, exceeding consensus expectations, reported the Bureau of Labor Statistics. Expectations were for a gain of 600,000. In the October data, the August gain was revised up by 4,000 and September was revised up by 15,000. Of the job losses in March and April, 10,090,000 are still unemployed. Figure […]
Zekelman Industries has launched a national advertising campaign advocating for increasing the level of manufacturing in the United States. Over the course of September and October, the company estimates its campaign will generate an estimated 315 million impressions, reaching decision-makers and policy influencers outside of the brand’s typical target audience of distributors, contractors, building developers and […]
Economic activity increased modestly in most of the U.S. in August but remained well below pre-COVID-19 levels, said the Federal Reserve in its latest Beige Book publication. “Continued uncertainty and volatility related to the pandemic, and its negative effect on consumer and business activity, was a theme echoed across the country,” said the Fed in […]