Final Census data shows that September foreign steel imports increased 17% from August to 3.26 million net tons and a 28-month high. October import licenses are currently at 2.47 million tons as of Nov. 4, down 24% from September and down 11% compared to August. The last time total monthly import levels were this high was April […]
The Steel Tube Institute has named Dale Crawford as its next executive director. He replaces Joseph Anderson, who is retiring. Crawford has served as director of STI’s Conduit Division since May 2017 and will continue in the Conduit Committee leadership role in addition to his responsibilities as executive director. Anderson, who has carried dual roles […]
As expected, steel prices are volatile and unpredictable as the market approaches year-end. Hot rolled continued its slow, gradual descent averaging $1,875 per ton this week, down another $10, based on Steel Market Update’s survey data gathered on Monday and Tuesday. Cold rolled and coated products, on the other hand, saw small increases to around […]
Raw steel production by U.S. mills slipped for the second consecutive week following their highest tonnage output since the pandemic started just two weeks prior. Domestic raw steel production was estimated at 1,860,000 net tons in the week ending Oct. 30, while the average mill utilization rate was 84.3%, according to the American Iron and […]
Domestic mills plan to announce higher zinc coating extras as soon as this week, according to market participants. The higher coating extras would be effective Jan. 1, 2022, they said. At least two domestic mills have also confirmed that extras will move higher. Zinc is used to make galvanized products. It prevents rust. Zinc prices […]
Steel imports into the United States jumped by nearly 35% in the first nine months of this year, versus the same period in 2020, according to Census Bureau data from the American Iron and Steel Institute (AISI). Tight supplies and record-high domestic steel prices have attracted a host of imports, which are reportedly some $400-800 […]
Hot rolled steel prices have declined for the fifth time in the last seven weeks to an average of $1,885 per ton, according to Steel Market Update’s check of the market on Monday and Tuesday. That’s down $70 per ton from the high reached in the first week of September. Price momentum for HR is […]
Domestic raw steel production edged down slightly after matching its pandemic-era high the week prior. Production by U.S. mills was estimated at 1,870,000 net tons in the week ending Oct. 23, while the average utilization rate was 84.7%, according to the American Iron and Steel Institute (AISI). Output was down 0.6% compared to the week […]
SSAB Americas has followed competitor Nucor in raising prices for steel plate by $50 per ton ($2.50 per cwt). The price hike is effective immediately for all new spot orders, the Mobile, Ala.-based steelmaker said in letters to customers on Monday, Oct. 25 The increase is $60 per ton CAD for customers in Canada. It applies […]
By CRU Analyst Helen O’Cleary, from CRU’s Zinc Monitor Zinc’s price started LME Week looking mildly bullish on short covering, with the 3-month official price settling at $3,246 /t on Oct. 12. By Oct. 15, it had reached $3,944 /t, turbocharged by news of smelter cutbacks in Europe due to soaring energy prices and the […]
By CRU Research Manager Eoin Dinsmore, from CRU’s January Zinc Monitor Buyers who are unfortunate enough to find themselves in the spot market are paying 18-23¢ /lb for SGH zinc. The most recent deals have all been at 20¢ /lb or higher. Buyers are fearful of being left short metal, while suppliers are either sold […]
Nucor Corp. in a leading move has increased plate prices by $50 per ton ($2.50 per cwt) with the opening of its December orderbook. The increase – announced on Friday, Oct. 22 and effective immediately – is equal across all plate products. The Charlotte, N.C.-based steelmaker had in prior months increase prices for quenched-and-tempered plate […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis increased over the last 30 days. Through Oct. 20, zinc prices shot up 24% over one month prior, iron ore prices rebounded 18% in one month’s time, aluminum prices rose 9%, and coking coal prices increased 8%. In that same time […]
Steel Market Update’s check of the market this week shows another small decrease for hot rolled steel prices. The hot rolled price has dipped three of the last four weeks by a total of $45 from the high of $1,955 per ton in the first week of September. SMU is changing its Hot Rolled Price […]
U.S. raw steel production has recovered after slipping for two straight weeks. Production by U.S. mills was estimated at 1,882,000 net tons in the week ending Oct. 16, while the average utilization rate equaled its highest reading all year at 85.3%, according to the American Iron and Steel Institute (AISI). Output rose by 1.3% compared to […]
By Stephen Williamson, CRU Research Manager, Aluminum Aluminum prices went through the $3,000 per metric ton mark on the LME this week. Fueled by energy constraints in China and tightening supply of alloy hardeners, the price broke through the $2,950 ceiling and ran up another $200. The price leveled at $3,150 as of this writing […]
By Stephen Williamson, CRU Research Manager, Aluminum Last week’s aluminum price below $3,000 per metric ton on the LME seemed like a bargain until it ran above $3,300 earlier this week. Yet, at week’s end, trading fell back to $3,050. Further confounding the market is magnesium supply and the prices raging on the hardener front. […]
By CRU Advisor Greg Wittbecker LME cash aluminum prices have retreated hard from new 13-year highs, falling from $3,300 last week to reach $2,682 as we completed the week. Supply-side Price Concerns Get a Reality Check but Remain Dangerous Market euphoria over supply-side constraints ran into the effect of China’s “command economy” at work. Power […]
By CRU Senior Analyst Ryan McKinley from CRU’s Steel Metallics Monitor The CRU metallics price indicator (CRUmpi) changed little in October, declining slightly by 0.4% to 374.1. Price directions were mixed but fell by the most for European scrap and DRI while scrap prices in Asia had the largest increases. We expect to see similar […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Steel Sheet Products Monitor Steel sheet price declines continue in the USA and Europe as lead times shorten further and inventories build. In the former market, small transactions are occurring at levels above $1,900 /s.ton, but there are many more deals occurring at well below this level. As […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor North American sheet prices are lower m/m as prices in the U.S. have finally started to fall, at least for HR coil. Over the past several weeks, the amount and overall volume of spot transactions between mills and buyers have slowed, yet we […]
Flat rolled and plate steel prices were flat to down slightly this week with the exception of a small increase in cold rolled, according to Steel Market Update’s check of the market on Monday and Tuesday. The small ups and downs in steel prices over the past month are in line with most buyers’ expectations […]
U.S. raw steel production edged down for the second straight week. Production by U.S. mills was estimated at 1,858,000 net tons in the week ending Oct. 9, while the average utilization rate was still a very strong 84.2%, according to the American Iron and Steel Institute (AISI). Output was down by 0.7% compared to the week […]
August apparent steel supply increased by 130,000 tons over July to 9.83 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. This is the highest supply level seen since January 2019, a 31-month record. August supply is up 2.69 million tons compared to the same month […]
In the face of strong demand, limited availability and record-high prices in the U.S., steel buyers have looked overseas for relief. August Commerce Department data shows steel imports have been on the rise for the past three months, with imports’ share of total sheet product shipments reaching 17.5%, up from 16.7% the month prior, and the […]
Cleveland-Cliffs Inc. isn’t feeling the heat of soaring metallurgical coal prices, at least not yet. And the Cleveland-based miner and steelmaker plans to turn to its own mines if the market overheats. “We are benefiting from our existing multi-year contracts with suppliers and also the supply from our own coal production operations,” a company spokeswoman […]
By CRU Senior Analyst Ryan McKinley and Analyst Dave Thewlis, from CRU’s Steel Long Products Monitor Long product prices in the U.S. remained elevated and moved higher again m/m in some cases for October. Wire rod mills pushed through another round of price increases in mid-September and there was little to no resistance from buyers […]
By CRU Principal Analyst Erik Hedborg, from CRU’s Steelmaking Raw Materials Monitor Iron ore prices have increased in the past week on post-holiday optimism that a real estate collapse can be avoided and the fact that steel production is increasing after the Chinese holiday. CRU has assessed the iron ore price at $132.0 /dmt, up […]
U.S. steel exports increased 1% from July to August at 764,000 tons, according to the latest U.S. Department of Commerce data. August levels remain in line with exports over the last few months. Recall that July saw the second highest monthly export level in the last three years (778,000 tons), just behind the April 2021 […]
Flat rolled steel prices are in transition, which tends to lead toward more volatility and wider price ranges in Steel Market Update data. One of the issues we face when we reach an inflection point in the spot market is the lack of daily transactions. With service center inventories nearing a state of balance, combined […]