Later this week is Thanksgiving so we will have an abbreviated publishing schedule this week. We will publish on Tuesday and we will not publish on Thursday. If we publish on Sunday it will be a shorter than normal issue and then we will get back to our normal schedule until we reach the Christmas […]
A note to our Premium level members, we put out a Premium supplemental newsletter this afternoon that covered an extensive analysis of the MSCI data (long and flat rolled), there is also an article on currency values for steel trading nations (not good news for domestic mills as dollar has been strengthening), there is a […]
Good evening from Memphis, Tennessee and Ocseola, Arkansas home of Big River Steel. Earlier today our Steel 101: Introduction to Steel Making & Market Fundamentals workshop held our class on the steel making and rolling process. The morning session was then followed by a trip to Osceola and a tour of the brand new (so […]
I am about to embark on a two-week trip which includes stops in Memphis (and Big River Steel in Arkansas), Las Vegas (FabTech and ASD annual meeting), San Diego and then on to Los Angeles to have Thanksgiving with my daughter and the rest of our family. I will be in the office early tomorrow […]
On Wednesday of this week I participated in the monthly HARDI conference call (see article in tonight’s newsletter). During the call one of the executives from an east coast HVAC wholesaler told the group that he didn’t believe prices could or would move much higher from here. I disagreed with him. One of the justifications […]
We are setting up this issue of Steel Market Update to be published at 11 PM Eastern Time. By then the polls will be closed in most, if not all, of the lower 48 states of the union. We may well know who will be the new President of the United States. Either way, whether […]
Two more days and we will all (I hope) be able to breathe once again. This is the last Sunday before the election here in the United States when we will decide who will be President and, just as important, who will control the House and Senate. The world is watching so I hope that […]
I have had a number of conversations with steel mills and steel buyers regarding when the next flat rolled steel price increase would be announced by the domestic mills? My opinion is the mills will use the new ferrous scrap settlement prices combined with stronger order books as the reasons for going out after perhaps […]
I want to spend a few moments to discuss an issue that I know is a sore point to the CEO’s at the steel mills. Lourenco Goncalves brought it up in a discussion we had this morning and that is why service centers (and others) do not sign or allow comments made to Steel Market […]
Our next flat rolled steel market trends analysis will not begin until next Monday, November 7th. We will begin our November surveys on the 7th and the 21st of the month. If you would like to be added to our invitee list please send me an email: John@SteelMarketUpdate.com. We currently have about 575 people on […]
We continue to watch flat rolled steel prices as anytime the mills announce a price increase it takes time to develop the “target” price. You have to remember that there is a range of prices – not everyone was paying $470 per ton for hot rolled coil before the price increase announcements were made. Some […]
We have an article about this in tonight’s newsletter as well but I want to make sure that everyone is aware that our next Steel 101: Introduction to Steel Making & Market Fundamentals Workshop is being held in Huntsville, Alabama on January 24 & 25, 2017. As part of this workshop we will tour the […]
On Friday I got a number of messages from people wanting to know how they can get information about a price increase announcement being made as soon as it comes out (or shortly thereafter). Right now what I try to do when announcements come out is to put it out on my Twitter account (@SMUSteel) […]
One of my habits when writing this newsletter is to hold my Final Thoughts until after the vast majority if not the entire newsletter is complete. At that point I try to absorb what has transpired through the day and many times that day flows well into the evening. I think this is one of […]
For those who have not been members for a long period of time or who may be new to Steel Market Update this section, my Final Thoughts, is the one area where I get to pontificate (provide my opinion) on subjects of interest to me. Today I want to briefly address the elephant in the […]
On Monday morning we will begin our mid-October flat rolled steel market survey. We expect to invite more than 550 people representing about 525 companies to participate in this market trends analysis. The invitations should be in your email inbox by 8 AM ET. We provide a power point presentation putting a good portion of […]
In David Feldstein’s article on the HRC Futures market he correctly points out one of the factors that steel buyers need to watch closely is the value of the dollar against the currency of the international steel trading nations. As the dollar increases in value those wanting to ship steel here also increases. As the […]
In this evening’s edition we have included a number of articles that would normally go to just our Premium level members. We thought that our Executive level members would like to get an idea of some of the articles and data they are missing. Included in that list is the Power Point presentation of our […]
When we last left you Hurricane Matthew was just beginning to approach the east coast of Florida as a category 4 storm. I was a little concerned about our office building and our home. I am pleased to tell you that the storm took a little jog to the east as it left the Bahamas. […]
Our corporate office building and my home are in the path of Hurricane Matthew. We have evacuated and are in Bradenton, Florida for the next couple of days with hopes that our office, home and neighborhood will still be there when we return over the weekend. Our thoughts and prayers are with those who decided […]
It is anything but a normal working day here on the east coast of Florida. Hurricane Matthew is forecast to be within 65 miles of my doorstep come Thursday and Friday of this week so today has been spent preparing to evacuate. No sense playing with Mother Nature. SMU HQ will be closed on Wednesday, […]
When looking at hot rolled coil prices U.S. buyers need to remain aware of what is going on with the rest of the world. Prices in Europe are rising and as one trader put it to us on Friday of this past week, “The Turks aren’t idiots.” Prices for HRC in the Turkish market are […]
The complaint filed by the domestic steel mills against China for circumvention of duties by converting Chinese substrate in Vietnam and then shipping it to the U.S. as Vietnamese products goes against trade rules that have been in place for many years. It has been understood that transforming hot rolled into cold rolled and/or galvanized […]
This area of the Steel Market Update newsletter is reserved for me to be able to provide my thoughts/opinions on a variety of subjects and our readers clearly know where these comments are coming from. I have been asked on a number of occasions to comment on “rumors” of a domestic mill flat rolled price […]
A note to our Premium level customers, the Power Point presentation of last week’s flat rolled steel market trends analysis has been placed on the website. We will have a Premium level newsletter coming out on Monday as well. If you have any questions or need assistance to find our survey results please contact Brett@SteelMarketUpdate.com […]
There have been two complaints filed with the U.S. Department of Commerce for circumvention of duties by Vietnam. One is on CORE (corrosion resistant steels like galvanized and Galvalume) and the second one is on cold rolled. Steel Market Update has seen the CORE complaint but we have not yet seen the cold rolled one. […]
I got a note from Eddie Lehner, the CEO of Ryerson who attended our Steel Summit Conference for the first time this year. He dropped me a note today about our conference, “The SMU Conference is flat out worth attending. An unusual combination of candor, depth and subject matter relevance throughout the steel value chain […]
With the Wheatland Tube filing of a complaint against China using the ENFORCE Act we are about to enter the next stage of trade complaints. The Wheatland complaint is for circumvention of duties that already exist against Chinese products, so it will be interesting how quickly this first test case takes and will Customs and […]
When speaking to one of the main ferrous scrap analysts in the industry our newsletter was paid a compliment when I asked if the scrap community was aware of our newsletter. I was told, “They do already. Many of them have a lot of confidence in your reports. They refer to it more often then […]
I spent a great deal of time on two projects: flat rolled pricing and steel mill maintenance schedules. I want to thank those companies who worked with me over the past few working days to be able to provide what I think is better data (both in pricing and in the schedules) than what has […]