Foreign steel imports for calendar year 2015 came in at 38,719,343 net tons. This represents a 12.7 percent reduction in tonnage compared to 2014. However, 2015 is still well above the average of imports seen over the past seven years. We saw large reductions in tonnage for semi-finished (mostly slabs), hot rolled, cold rolled, plates […]
Cliffs Natural Resources narrowed its net loss to $58 million in fourth quarter compared to $1.4 billion in Q4 2014. Full year net loss was $748 million compared to $8.3 billion in the prior year. “Despite the severely negative impacts of global iron ore and domestic steel prices, in 2015 we achieved substantial cost reductions […]
Hot rolled prices, which have moved $45 per ton (higher) since early December, did not move this past week. Hot rolled has been the weakest of products which both SDI and AK Steel alluded to in their earnings conference calls earlier today. However, we have seen lead times improve on cold rolled and coated steels […]
For the week ending January 23, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,670,000 net tons of raw steel, a 1.1 percent increase over the previous week but a 7.6 percent decrease over the same week one year ago. The estimated capacity utilization rate is 69.8 percent, up […]
The U.S. Department of Commerce released foreign steel import license data through the 26th of the month late this afternoon. Based on the data to date, January imports are trending toward a 2.5 to 2.7 million net ton level. This would be slightly higher than December’s 2.6 million tons and above November’s 2.4 million tons. […]
Flat rolled steel prices slowly moved higher this past week according to the revisions made to the SMU and Platts steel indexes. Benchmark hot rolled prices were rose $5 per ton on the SMU index taking our number to $405 per ton. Platts kept their $410 per ton number the same on HRC from the […]
In the market analysis questionnaire concluded late last week we asked a number of questions regarding foreign steel and the potential for another uptick in foreign market penetration with the domestic mills raising flat rolled steel prices. We asked if the mill price announcements were opening the door and making foreign steel prices more competitive? […]
On Thursday evening’s issue of Steel Market Update we published an article about raw material prices. In the article, Peter Wright, a metallurgist, marketing specialist, contributing writer and Steel 101 instructor for Steel Market Update, referenced the relationship between WTI oil and scrap pricing. He said, “There is a close non causal relationship between the […]
The following article is normally produced for our Premium level members, but we wanted to share it with our Executive level members as we think it is important and interesting as the world is flooded with excess steel capacity. If you find this article interesting you may be interested in upgrading your membership from Executive […]
The following article on the hot rolled coil (HRC), busheling scrap (BUS), and financial futures markets was written by Andre Marshall, CEO of Crunch Risk LLC and our Managing Price Risk I & II instructor. Assisting Andre with tonight’s article is Jack Marshall also associated with CrunchRisk. Here is how Andre and Jack saw trading […]
The domestic steel mills announced a new round of price increases earlier this month. Steel prices are responding by moving higher, at least by a portion of the second increase. We are hearing from our sources that the mills have been able to collect $40-$50 or essentially all of the first price increase by this […]
For the week ending January 16, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,652,000 net tons of raw steel, a 3.6 percent increase over the previous week but a 8.6 percent decrease over the same week one year ago. The estimated capacity utilization rate is 69.1 percent, up […]
This article is normally reserved for our Premium members but we felt it would be a good one to share with all of our readers. If you are interested in signing up for a Premium membership or would like a trial, let us know at info@SteelMarketUpdate.com or call (800) 432 3475. Following up on our […]
The U.S. Department of Commerce released foreign steel import license data for the month of January. Based on license data through the 19th of January steel imports are trending toward a 2.3-2.5 million net ton month. If the trend continues the month would be well below both the 3 month and 12 month moving averages […]
Each month the American Institute for International Steel (AIIS) provides an analysis of steel imports to the U.S. The following January 18 release describes imports for November. Falls Church, VA. January 18, 2016. Steel imports plunged once again in November, dipping to a level more than one-third less than a year earlier. The United States […]
Flat rolled steel prices are beginning to catch some wind behind their backs this past week according to the various steel indices followed by Steel Market Update. Benchmark hot rolled prices moved from a low of $4 per ton (SteelBenchmarker at $386) to as much as $20 per ton (Platts at $410). What is undeniable […]
According to the latest data released from the US Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of November 2015 was 7,710,331 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports and subtracting total US steel exports. Foreign steel […]
Net imports equals imports minus exports. We regard this as an important look at the overall trade picture and its effect on demand at the mill level. Figure 1 shows that net sheet product imports on a three month moving average (3MMA) basis at 546,093 tons in November continue to be more than double that […]
The following article is written by Spencer Johnson of FC Stone LLC. With six years of experience, Spencer provides his customers strategic and tactical advice on protecting themselves against commodity price volatility in the steel markets. Spencer rotates weekly futures articles with Andre Marshall of Crunch Risk, LLC. Spencer can be reached at spencer.johnson@intlfcstone.com. In […]
AK Steel kept their press release announcing their new flat rolled steel pricing short and sweet: “West Chester, OH, January 13, 2016—AK Steel (NYSE: AKS) said today that it will increase current spot market base prices for all carbon flat-rolled steel products by $30 per ton, effective immediately with new orders.” Here is what their […]
On Tuesday evening ArcelorMittal advised their customers of their intention to raise carbon flat rolled sheet prices. In an email to their customers the mill advised that they would be raising prices on hot rolled, cold rolled and coated steels (galvanized and Galvalume). The mill told their customers: “Effective immediately with all new quotations, ArcelorMittal […]
The U.S. Department of Commerce updated January 2016 foreign steel import license data earlier this week. For a number of months Steel Market Update has been comparing the data to see how the current month’s numbers compare to prior months in an effort to get a better handle on the trend. January’s number may be […]
Over the last two flat rolled steel market analysis performed by Steel Market Update (the last concluding this past Thursday, January 7th) we have seen a dramatic break in the overall (all participants included) demand trend. As you can see by the graphic provided, over the past two quarters we saw the rise and peak […]
The following calculation is used by Steel Market Update to identify the spread between world hot rolled export prices as determined by SteelBenchmarker and domestic (US) hot rolled prices as published by SMU. Steel Market Update compares the world hot rolled export price to which dollars are added for freight, handling, trader margin, etc. The number […]
The prices we have referenced in tonight’s issue do not reflect the new price increase announcements. We understand that there are new prices floating in the marketplace that has galvanized and Galvalume base prices at $28.50/cwt and hot rolled well over $400 per ton. However, the numbers we have been collecting since Monday are showing […]
Nucor Sheet Mill Group got the flat rolled pricing ball rolling earlier today as they advised their customers by emailed letter that base prices will rise on new spot orders by a minimum of: Hot Rolled: $20 per ton ($1.00/cwt)Cold Rolled: $30 per ton ($1.50/cwt)Galvanized: $30 per ton ($1.50/cwt) Nucor did not advise of any […]
Plate price increase announcements actually preceded those of hot rolled, cold rolled and coated products. On Monday, both Nucor and Evraz North America sent out letters to their customers advising plate prices would be rising by $30 per ton. The Evraz letter said: “Please be advised that effective immediately with all new orders, Evraz NA […]
For the week ending January 9, 2016, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,594,000 net tons of raw steel, a 10.7 percent increase over the previous week but a 11.8 percent decrease over the same week one year ago. The estimated capacity utilization rate is 66.7 percent, up […]
The U.S. Department of Commerce announced the final census data for foreign steel imports for the month of November. November imports were 2,453,593 net tons (not metric tons as we have already made the conversion from the US DOC charts) which is significantly below both the 3 month and 12 month moving averages (see table […]
Coal companies have been struggling with regulation changes and decreasing demand over the past several years. According to U.S. Energy Information Administration data, coal production fell 10 percent in 2015 to its lowest level since 1986. Coal prices have dropped 35 percent in just the past two years. The result has been bankruptcy restructuring proceedings […]