AIIS reports that steel imports in August dropped a significant 8.2 percent from July to total 3.02 million tons. The biggest reductions were seen in imports from the EU, Mexico and China. AIIS says the decline in steel purchase is a harbinger of slower growth for construction and the economy. The press release from AIIS […]
Steel imports to Mexico will see a 15 percent increase in tariffs for the next six months. The government said it will impose the temporary increase on imports from countries that do not have a free-trade agreement with Mexico in an attempt to stem the surge of low-priced imports flooding the country. Canacero, the Mexican […]
United Steel Workers at Cliffs Natural Resources have agreed to extend their labor contract for 30 days beginning on Oct. 1, along with a rolling 168-hour extension if talks exceed 30 days. The USW bargaining committee says it has made progress on some issues but “remain far apart on many others.” The committee is returning […]
Flat rolled steel prices remained “flexible” over the past week. During our conversations with steel buyers (and steel mills) we learned that the best prices were being offered on tonnage tied to an actual order. One of the big issues we face as we try to develop fair and reasonable price ranges is how do […]
Both manufacturing companies and flat rolled steel service centers reported the percentage of distributors offering lower spot pricing on flat rolled steels as growing. This is a key indicator followed by Steel Market Update (and no other publication) as falling spot prices out of the distributors are usually due to high inventories leading to competitive […]
After zinc spot pricing peaked in May of this year at $1.10 per pound, it has been steadily moving lower, closing at $0.7363 per pound at the end of trading on Monday, September 28th. Steel Market Update has been writing about the drop in spot LME zinc (as well as aluminum which impacts Galvalume, Aluminized […]
As the Oct. 1 contract deadline approaches, labor negotiations at Cliffs Natural Resources are slowly progressing. The USW bargaining committee presented a proposal on Sept. 19 to the company which was discussed at meetings on Sept. 25. “We are beginning to see some progress and top table talks will continue through the weekend,” said the […]
For the week ending September 26, 2015, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,735,000 net tons of raw steel, a 1.7 percent increase over the previous week but a 7.6 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.6 percent, up […]
Last week three of the four steel indices followed by Steel Market Update reported flat rolled steel price averages for the week. We saw large double digit declines in the CRU on hot rolled, cold rolled and galvanized while Platts only saw movement in hot rolled. Steel Market Update captured declines in hot rolled, cold […]
The U.S. Department of Commerce released August Preliminary Census Data showing August imports as being 3,016,157 net tons (2.7 million metric tons). August imports are down 200,000 tons compared to July and were below both the 3 month and 12 month moving averages. When looking at flat rolled items we found a small reduction in […]
AISI: WASHINGTON, D.C. – American Iron and Steel Institute (AISI) President and CEO Thomas J. Gibson today urged President Obama to “fight for manufacturing and for steel” during the U.S. visit of Chinese President Xi Jinping this week. Gibson said his group wholeheartedly supports the positions outlined in letters sent this week to the Administration […]
Flat rolled steel buyers reported a weakening flat rolled steel market this week. Large buyers are now able to buy spot hot rolled at $410-$420 per ton with medium sized buyers seeing prices closer to $420-$440 per ton. We are seeing cold rolled and coated products as doing a little better as they have been […]
The U.S. Department of Commerce released new foreign steel import license data this afternoon that suggests imports for the month of September may not be below 3.0 million tons after all. At this moment, using data through today and projecting the rate to remain the same for the balance of the month, September would come […]
The following article was produced for our Premium level members earlier this week. We wanted to share it with our Executive level members as we think it is important and interesting as the world is flooded with excess steel capacity. If you find this article interesting you may be interested in upgrading your membership from […]
For the week ending September 19, 2015, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,706,000 net tons of raw steel, a 0.7 percent increase over the previous week but a 9.2 percent decrease over the same week one year ago. The estimated capacity utilization rate is 71.4 percent, up […]
Global steel production in 12 months through August totaled 1.615 billion tonnes with a capacity of 2.3 billion tonnes. Capacity utilization in August was 68.4 percent with a three month moving average (3MMA) of 69.1 percent, down from 71.6 percent in three months through June. China accounted for 50.5 percent of global production in August. […]
Flat rolled and plate prices continued to slip as all of the indexes followed by Steel Market Update reported pricing this week. The CPI benchmark hot rolled average dropped $2 to end the week at $446 per ton ($22.30/cwt). We now have SMU with the lowest average at $440 per ton followed by Platts ($445), […]
The key word that we are hearing from steel buyers and mills alike is the market is QUIET, very, very quiet. Lead times referenced continue to be short. Inventories continue to be high. We did not collect any huge changes in our key product averages. We are hearing that extras on many products are being […]
The U.S. Department of Commerce released the latest license data for the month of September through the 15th of September late this afternoon. For the first time in many months we are seeing a large change in the license requests at this point in the month. Earlier this month it appeared that licenses were trending […]
For the week ending September 12, 2015, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,694,000 net tons of raw steel, a 2.7 percent decrease over the previous week and a 9.8 percent decrease over the same week one year ago. The estimated capacity utilization rate is 70.9 percent, down […]
The flat rolled steel indexes followed by Steel Market Update saw prices as being relatively flat this past week with the exception of Platts which is playing catch-up as they move their prices to be more in line with the other indexes. SMU kept all of our indices the same as the prior week as […]
Net imports equals imports minus exports. We regard this as an important look at the overall trade picture and its effect on demand at the mill level. Figure 1 shows that net sheet product imports on a three month moving average, (3MMA) basis at 718,000 tons in July continue to be more than double that […]
In the first seven months of this year bulk scrap exports were 7,809,000 tonnes for an annual rate of 13,387,000 tonnes, down by 11.6 percent from the first seven months of last year. The tonnages shown in Figure 1 are based on three month moving averages for 2015 and on the twelve month monthly average […]
Manufacturing expanded at its slowest pace in two years, according to August data from the Institute for Supply Management (ISM). On the domestic front, consumer spending remains strong bolstered by low gas prices and job growth but manufacturing for export has suffered from ailing global economies and the strength of the US dollar. The export […]
The U.S. Department of Commerce (US DOC) released final July Census Data which means they have announced the final steel import numbers for the month. Total steel imports for the month of July 2015 were 3,285,600 net tons (SMU converts the USDOC metric ton data into net tons for our readers). The July totals were […]
SMU adjusted our flat rolled price indices on Thursday of last week due to information we gathered after the conclusion of our Steel Summit Conference. We noted then that the market has been very slowly leaking, with the bottom of our hot rolled range hitting $420 per ton. One of the mills with which we […]
This data is normally reserved for our Premium members, but we wanted to give our Executive readers a view of what a Premium subscription includes. This is one of many additional data points available to our Premium level members. Licensed data for August was updated on September 4th through the Steel Import Monitoring System of […]
Due to the Labor Day Holiday in the United States, Steel Market Update did not produce our Comparison Price Indices article on Sunday evening. Since many of our readers look forward to this information we are publishing last week’s numbers this evening. Hot rolled coil was dropped below $450 per ton on two indexes – […]
Last week Steel Market Update conducted our early September flat rolled steel market analysis. One of the areas we watch very closely is how are distributors handling spot flat rolled steel purchase prices to their manufacturing customers? We have found that as service center spot prices weaken, so do mill prices until they reach the […]
For the week ending September 5, 2015, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,741,000 net tons of raw steel, a 2.2 percent increase over the previous week but a 8.0 percent decrease over the same week one year ago. The estimated capacity utilization rate is 72.8 percent, up […]