Nucor’s Plate Group announced a $30 price increase on Aug. 14, citing escalating raw material and input costs. Nucor will increase transaction prices on all new orders for carbon, alloy and heat-treated plate by $30 per ton, effective immediately. Plate distributors responding to SMU’s request for comment are generally supportive of Nucor’s move. “The plate […]
Domestic raw steel production totaled 1,780,000 net tons in the week ending Aug. 12, up 1.0 percent from the previous week and a 7.6 percent increase from the same period in 2016. The mill capability utilization rate was 76.4 percent for the week, up from 70.8 percent the same time last year, reports the American […]
Cliffs Natural Resources, in celebration of 170 years in business, has returned to its historical name Cleveland-Cliffs Inc. “The historical name Cleveland-Cliffs is synonymous with our strong heritage and is the perfect one for our next era of growth,” said Chairman, President and CEO Lourenco Goncalves. “As we did more than 60 years ago, when […]
Based on the steel indexes followed by Steel Market Update (SMU), there were some very minor changes to hot rolled and cold rolled prices this past week, while coated products were unchanged and plate products fell. Both Platts and SMU had hot rolled falling by $5 per ton with both indexes reporting the HRC average […]
Total raw steel production for the month of June was 7,487,972 net tons, with 5,182,147 tons produced by electric arc furnaces (EAF) and 2,305,825 tons produced by blast furnaces. June raw steel production was 118,921 tons or 1.6 percent lower than the previous month, and 34,195 tons or 0.5 percent lower than the same month […]
One of the reasons Steel Market Update has constant contact with steel buyers and steel mills is because we are aware that pricing momentum can change on a rumor or a belief that supply or demand is shifting. We are seeing market sentiment being impacted by Section 232. At the same time, scrap prices are […]
Editor’s note: As a special bonus, we are sharing this premium-level article with all our subscribers: Demand for sheet products is increasingly driven by hot rolled coil. Imports are taking a greater share of the sheet market, reaching 21.2 percent in June. Apparent supply is a proxy for market demand, and the apparent supply of […]
U.S. steel exports in June totaled 910,988 net tons (826,435 metric tons), down 9.5 percent over May, but up 12.3 percent from June 2016. Although down over last month, total June exports are in line with the average monthly level over the last few months. Back in May, total exports had climbed to 1,006,087 tons, […]
Editor’s note: As a special bonus, we are sharing this premium-level article with all our subscribers: We believe that misinformation (or lack of) about regional import volumes is often used to influence purchase decisions. Our intent with this analysis of tonnage by district of entry is to describe in detail what is going on in […]
Flat rolled steel prices remained range-bound on most items for yet another week. We picked up a couple of points of weakness in coated products, but they seem to be isolated in nature. Many of the steel buyers are reporting the mills (especially Nucor) are talking up the idea of a price increase on flat […]
Domestic raw steel production totaled 1,762,000 net tons for the week ending Aug. 5, down 0.4 percent from the previous week, but up 6.3 percent from the same week last year, reports the American Iron and Steel Institute in Washington. Mill capability utilization for the Aug. 5 week averaged 75.6 percent, a significant improvement from the […]
It is now official. According to the U.S. Department of Commerce, June 2017 foreign steel imports totaled 3,923,126 net tons and are at the highest levels seen since January 2015, prior to the antidumping (AD) and countervailing duties (CVD) trade suits being filed. Approximately one-quarter of the imports were semi-finished steels (mostly slabs) with the […]
Flat rolled and plate steel prices were essentially flat this past week as both Steel Market Update and Platts saw hot rolled, cold rolled, galvanized and Galvalume steel prices remaining the same as the previous week. With Section 232 being put on the back burner, the flood of foreign steel imports (prompted by the original […]
Total imports of rolled steel increased by 16.9 percent, and sheet products by 18.4 percent, in the three months through July, compared with the prior three months, according to final license data for July released by the U.S. Commerce Department on Aug. 1. The three-month moving average (3MMA) of the total volume of rolled product […]
Steel Market Update has seen a bit of a yo-yo effect to flat rolled and plate steel prices over the past few weeks. Since the word got out that the Section 232 decision would not be announced any time soon, the market has taken a step back to evaluate where prices will go from here. […]
Domestic raw steel production totaled 1,769,000 net tons in the week ending July 29, down 0.2 percent from the previous week, but up 6.1 percent from the same period last year, reports the American Iron and Steel Institute in Washington. The mill capability utilization rate for the July 29 week was 75.9 percent, down from 76.1 […]
Flat rolled steel price averages rose on all three indexes followed by Steel Market Update (SMU) this past week. Hot rolled has become the “hottest” product recently, according to steel buyers contacted by SMU during the week. Benchmark HRC rose to $625 per ton on Platts, as well as our own index. SteelBenchmarker, which only […]
Foreign steel imports continue to trend well over the 3.0 million net tons mark as steel buyers placed heavy tonnage once the Section 232 investigation was announced in March (March orders = June/July delivery). The U.S. Department of Commerce (DOC) released preliminary census for June and license data for July earlier this evening. According to […]
The following is a press release on steel exports from the American Institute for International Steel (AIIS) on July 27 2017: Falls Church, VA. July 27, 2017. Steel exports swelled 17.3 percent from April to May – and were up 25.2 percent from a year earlier – to surpass 1 million net tons. More than […]
Cliffs Natural Resources is psyched to begin construction on its HBI facility. The company is currently in discussions with potential financial partners that align with Cliffs’ strategy for growth. CEO Lorenzo Goncalves says a financial partner for a $700 million private investment is not necessary to move the project forward, but would be nice to […]
Steel buyers reported the domestic steel mills as being somewhat more receptive to moving prices early this week compared to where they were at the end of this past week. The result being we did see prices rising on all sheet products. One mill told us earlier today about their coated products order book, “Hanging […]
U.S. raw steel production totaled 1,773,000 net tons in the week ending July 22, up 0.6 percent from the previous week and an increase of 6.4 percent from the same period last year. The mill capability utilization rate was 76.1 percent, up from 75.6 percent in the prior week and 71.3 percent a year ago, […]
Global steel production in the three months through June set another record and once again China was the driver, reports the World Steel Association, with the following analysis by SMU. World steel production in the month of June totaled 141,046,000 metric tons, down from 143,204,000 tons in May. Capacity utilization was 73.0 percent, up from […]
Last week, Steel Market Update (SMU) completed our mid-July flat rolled market trends analysis. We invited 650 steel executives to participate. Of those responding, 48 percent were service centers, 41 percent were manufacturing companies, and 8 percent were trading companies, with steel mills and toll processors accounting for 4 percent each. One of the questions […]
The week ending July 21 was another mixed week for flat rolled steel and plate prices. Steel Market Update (SMU) steel price indices saw two products as being higher, two lower and one unchanged. Platts had two higher and one lower. SteelBenchmarker did not report prices this week as they only report twice per month. […]
On Wednesday, Nucor became the first flat rolled mill east of the Rockies to increase spot prices on hot rolled, HRP&O, cold rolled and galvanized steels. Nucor Sheet Mill Group sent out a letter to their customers advising that effective immediately they were taking pricing up by a minimum of $25 per ton ($1.25/cwt). On […]
The U.S. Department of Commerce (DOC) released new foreign steel import license data on July 18. The trend for July is for steel imports to remain quite high, in the mid 3-million-net-ton range. We expect imports to be lower than June’s 3.9 million net tons, but above the 12-month and 3-month moving averages. Finished steel […]
As the steel industry waits for clarity on Section 232 we got another week where flat rolled steel prices came in with mixed results. We saw some of the items indexed have their averages rise while others fell. In reality it doesn’t appear that there is a lot pushing prices in one direction or another […]
U.S. raw steel production hit 1,763,000 net tons in the week ending July 15, up 1.7 percent from the previous week and up 5.8 percent from the same week last year. Mill capacity utilization for the July 15 week averaged 75.6 percent, up from 74.3 percent the prior week and 71.3 percent the prior year. […]
Flat rolled prices were mixed this past week. Early last week we were collecting information from steel buyers who were advising Steel Market Update that steel mill lead times were short and there were still holes in the order books at many of the domestic mills. As the week progressed we found, especially after the […]