Capacity utilization by domestic steelmakers rose for the 10th week in a row last week, but remained about 25 percent behind production in the same week last year, reported the American Iron and Steel Institute. Raw steel production by U.S. mills totaled 1,377,000 net tons in the week ending Aug. 15, with the mills hitting […]
U.S. steel mills shipped 6,023,524 net tons in June, a 10.3 percent increase from the 5,461,851 net tons shipped in the previous month, but a 22.0 percent decrease from the 7,718,499 net tons shipped in June 2019, reports the American Iron and Steel Institute. Shipments year-to-date in 2020 total 41,218,207 net tons, a 14.5 percent […]
Steel Market Update is pleased to share this Premium content with Executive subscribers. For more information on how to upgrade to a Premium subscription, email Info@SteelMarketUpdate.com. July was the ninth consecutive month where imports were down by more than 20 percent compared to the same month last year, according to the latest Commerce Department data. […]
Ferrous scrap prices for August were not as weak as expected, but varied widely by region. Prices on the East Coast and in the Southeast were up $30/GT due to strong export demand, while prices in other parts of the country traded sideways for obsolete grades and down $20-30 for primes, report Steel Market Update […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Hot rolled futures volumes have been a bit uneven as forecast uncertainty remains while businesses continue to navigate through a difficult summer […]
Recently released Census data shows final June steel imports totaled 1.40 million net tons, down 22 percent from May and down 50 percent from March, according to the U.S. Department of Commerce. This is the lowest monthly import level since November 2009 when total imports were 1.38 million tons. This final June figure is just […]
By CRU Prices Analyst George Pearson, from CRU’s Steel Monitor. The U.S. Midwest sheet market was somewhat mixed this week as prices for both HR and HDG coil fell w/w, while CR coil rose by $3 /s.ton. The price of HR coil fell $5 /s.ton w/w and is at its lowest level since the prior […]
By CRU Senior Analyst Ryan McKinley, from CRU’s Metallics Monitor The CRU metallics price indicator (CRUmpi) rose by 3.6 percent m/m in August to 205.1. China’s demand for finished steel has either lifted or stabilized both scrap and metallics prices across the globe. Looking ahead, we expect this trend to continue through September as markets […]
Steel Market Update’s check of the market over the past two days shows that nearly 70 percent of steel buyers believe prices are near a bottom, and the numbers support that view, showing little variation from last week. SMU puts the benchmark average price for hot rolled steel at $450 per ton, unchanged from last […]
Steel production by U.S. mills has been creeping steadily upward for the past eight weeks as the economy and steel demand slowly recover from the effects of the coronavirus. Production for the first seven months of the year remains nearly 20 percent below the same period in 2019, however. Adjusted year-to-date production through Aug. 1 totaled […]
By CRU Research Analyst Eduardo Tinti, from CRU’s Steelmaking Raw Materials Monitor Last week, iron ore prices rallied, rising by $10.7 /dmt w/w. This was mainly due to very strong Chinese demand driven by high steelmaking margins, BFs operating at historic high capacity utilization rates and bullish market sentiment. Albeit rising iron ore inventories at […]
Hot rolled steel prices have declined nearly every week since early June when the benchmark price was at $515 to the current average of $450 per ton–a 13 percent decline in just seven weeks. Two out of three respondents to SMU’s poll of the market a week ago said they believe flat rolled steel prices are […]
U.S. raw steel production rose 0.7 percent to 5,453,000 net tons in June, as reported last week by the American Iron and Steel Institute in Washington. June production was well below the 2020 average of 6,687,000 tons, and down 31.7 percent compared to the same month last year. June production was 38,000 tons higher than […]
Steel imports into the United States declined by more than 20 percent in the first half of 2020, reported the American Iron and Steel Institute, based on preliminary Census Bureau data. Through the first six months of this year, total steel imports declined by 20.8 percent to 12.4 million tons, while finished steel imports declined […]
SMU contributor Tim Stevenson is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Tim’s previous role, he was a Director at Cargill Risk Management, and […]
SMU contributor Tim Stevenson is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Tim’s previous role, he was a Director at Cargill Risk Management, and […]
Steel Market Update’s check of the market this week shows flat rolled and plate steel prices falling by a further $10, taking the benchmark hot rolled price down to $450 per ton. Most respondents expressed doubts that the price increase announced last week by the integrated mills will gain any traction, especially since the minimills […]
Ferrous scrap prices are likely to trade flat to down a further $20 per ton in August, following on a $20-40 drop in July, lending little support to the mills’ hopes to raise finished steel prices as the economy slowly recovers from the pandemic. CRU Senior Analyst Ryan McKinley said stronger demand for scrap exports […]
A possible indication that the economy and steel demand gradually continue to improve, domestic steelmakers increased raw steel production for the seventh week in a row to a total of 1,320,000 net tons in the period ending July 25 with the mills operating at an average utilization rate of 58.9 percent, reported the American Iron […]
Recently released preliminary steel import data shows June imports totaling 1.39 million net tons, according to the U.S. Department of Commerce. This is down 410,000 tons or 23 percent compared to final May imports. Taking semifinished products out of the picture, imports of finished products were down 12 percent in June over the previous month; […]
The U.S. share of global scrap trade has been increasing since Q1 2016 and in Q1 2020 was 23.3 percent. This is a quarterly analysis that SMU performs using data from the Iron and Steel Statistics Bureau (ISSB) in the UK. Some nations are slow to report, which results in the analysis being two months […]
This week’s SMU comparison of foreign and domestic hot rolled prices shows that U.S prices have gained an even greater advantage over foreign imports, according to SMU and CRU indices. After shrinking in May, the price gap between domestic HRC compared to German, Italian, and East/Southeast Asian imports has widened over the last few weeks. The […]
Hot roll steel held its own this week, remaining at an average price of $460 per ton. Cold rolled, galvanized and Galvalume prices slipped by a further $5-10 per ton, however, based on Steel Market Update’s latest check of the market. SMU will leave its price momentum indicators unchanged—pointing lower for HR, CR and galv—until […]
U.S. Steel, USS-POSCO Industries (UPI) and AK Steel each announced a $40 increase in flat rolled steel prices on Tuesday, July 21, hoping to reverse the slide that has cut about $120 per ton from steel prices since the coronavirus struck in mid-March. U.S. Steel’s North American Flat-Rolled Sales Organization informed customers today that base […]
Domestic steelmakers continue to increase raw steel production with mill capacity nearing 60 percent once again, even as the spread of the coronavirus threatens new disruptions to the economy. Steel production moved up for the sixth week in a row to a total of 1,306,000 net tons in the period ending July 18 with the […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel Declining HR spot steepens the HR futures curve even as it shifts lower, but the light is just around the corner. […]
Recently released license data shows June steel imports at 2.01 million net tons, up 12 percent from May, according to the U.S. Department of Commerce. Finished steel imports in June are currently at 1.47 million tons, down 3 percent from the previous month. Imports of semifinished products (mostly slabs) are at 540,000 tons for June, […]
By CRU Prices Analyst George Pearson, from CRU’s Steel Sheet Products Monitor The U.S. Midwest market has continued to record lower weekly sheet prices. Our assessment of HR coil is now down $23 /s.ton since the July 1 assessment and market participants expect further price declines to emerge for all sheet products over the near […]
Flat rolled and plate steel prices continued to slide this week, down by $5 to $15 per ton depending on the product, reflecting the lower scrap prices and uneven demand in July. Steel Market Update’s Price Momentum Index continues to point toward lower prices for hot rolled, cold rolled and galvanized in the next 30 […]
By CRU Principal Analyst James Campbell, from CRU’s Steel Sheet Products Market Outlook Sheet demand collapsed in 2020 Q2 to the lowest level in a decade. As lockdowns eased in May, manufacturing activity improved, and prices increased in most regions. Global sheet demand is expected to improve in 2020 Q3 and accelerate in 2021. However, output will […]